URX III availability?
- post tensioned
- Silent But Deadly
- Posts: 410
- Joined: Sat Dec 08, 2007 1:33 pm
- Location: Land O'Lakes, FL
URX III availability?
Since I saw the pics of the 16" 300 BLK uppers from AAC using the new URX III, does this mean they will be commercially available soon?
- KevinB
- Silent But Deadly
- Posts: 1100
- Joined: Fri Feb 27, 2009 10:38 am
- Location: Northern VA
- Contact:
Re: URX III availability?
Rifle length only at this time.
P/N 30005-3
P/N 30005-3
Kevin S. Boland
Director of Military Operations
Knight's Armament Company
701 Columbia Blvd.
Titusville, Fl 32780
Ph 321-607-9956
Cell 407-451-4544
Fax 321-383-2143
http://www.knightarmco.com
Director of Military Operations
Knight's Armament Company
701 Columbia Blvd.
Titusville, Fl 32780
Ph 321-607-9956
Cell 407-451-4544
Fax 321-383-2143
http://www.knightarmco.com
Re: URX III availability?
Weight?
- randrewhoffer
- Member
- Posts: 34
- Joined: Sat Jan 23, 2010 10:39 pm
- Location: Ohio
Re: URX III availability?
Are these available in black?
- KevinB
- Silent But Deadly
- Posts: 1100
- Joined: Fri Feb 27, 2009 10:38 am
- Location: Northern VA
- Contact:
Re: URX III availability?
I will weight one for you when I get another.
They are all in black. Certain ones where cerakoted tan on guns.
They are all in black. Certain ones where cerakoted tan on guns.
Kevin S. Boland
Director of Military Operations
Knight's Armament Company
701 Columbia Blvd.
Titusville, Fl 32780
Ph 321-607-9956
Cell 407-451-4544
Fax 321-383-2143
http://www.knightarmco.com
Director of Military Operations
Knight's Armament Company
701 Columbia Blvd.
Titusville, Fl 32780
Ph 321-607-9956
Cell 407-451-4544
Fax 321-383-2143
http://www.knightarmco.com
Re: URX III availability?
where can we order them from that will ship to CA?
Re: URX III availability?
I can order one for you. Shoot me a PM
Re: URX III availability?
Sorry for the ignorant question but the URXIII is the same that came on the Magpul SR15 edition? Please correct me if Im wrong. The rifle version is actually available now...is it 12"?
Thanks
Thanks
- dangerdan87
- Silent But Deadly
- Posts: 205
- Joined: Thu Mar 12, 2009 12:21 am
- Location: East Texas
Re: URX III availability?
NO, they are different. The URX on the Magpul Dynamics edition is the same as the special run LW URX.F8ality wrote:Sorry for the ignorant question but the URXIII is the same that came on the Magpul SR15 edition? Please correct me if Im wrong. The rifle version is actually available now...is it 12"?
Thanks
Observe:
URX III
Magpul Dynamics SR-15 URX/ special run LW URX/ "lunch box URX"
Uncle
Sam's
Misguided
Children
Sam's
Misguided
Children
Re: URX III availability?
dangerdan87 wrote:NO, they are different. The URX on the Magpul Dynamics edition is the same as the special run LW URX.F8ality wrote:Sorry for the ignorant question but the URXIII is the same that came on the Magpul SR15 edition? Please correct me if Im wrong. The rifle version is actually available now...is it 12"?
Thanks
Observe:
URX III
Magpul Dynamics SR-15 URX/ special run LW URX/ "lunch box URX"
Ah I see, thanks for the clarification. And the URXIII is available right now to order by itself?
- KevinB
- Silent But Deadly
- Posts: 1100
- Joined: Fri Feb 27, 2009 10:38 am
- Location: Northern VA
- Contact:
Re: URX III availability?
Yes we are taking orders from dealers on the URXIII
Kevin S. Boland
Director of Military Operations
Knight's Armament Company
701 Columbia Blvd.
Titusville, Fl 32780
Ph 321-607-9956
Cell 407-451-4544
Fax 321-383-2143
http://www.knightarmco.com
Director of Military Operations
Knight's Armament Company
701 Columbia Blvd.
Titusville, Fl 32780
Ph 321-607-9956
Cell 407-451-4544
Fax 321-383-2143
http://www.knightarmco.com
Re: URX III availability?
Will this replace the URXII on the SR-15E3?
Re: URX III availability?
Is the spring loaded front sight also on the URX III?
Re: URX III availability?
Sorry if this is a crappy first post, I've read some of the threads here and just decided to register.
I called KAC today about the new URX III with the part number shown above, and was told that it's not in production? I thought it was available? I really would like to replace my mid length SR15 IWS URX with the newer rifle length URX III.
Thanks,
Tom
I called KAC today about the new URX III with the part number shown above, and was told that it's not in production? I thought it was available? I really would like to replace my mid length SR15 IWS URX with the newer rifle length URX III.
Thanks,
Tom
Re: URX III availability?
Tom, you're going to have a hard time putting a rifle length urx on the SR15 E3 due to the location of the gas block.Tom12.7 wrote:Sorry if this is a crappy first post, I've read some of the threads here and just decided to register.
I called KAC today about the new URX III with the part number shown above, and was told that it's not in production? I thought it was available? I really would like to replace my mid length SR15 IWS URX with the newer rifle length URX III.
Thanks,
Tom
Re: URX III availability?
The local KAC handy man can do it. Contact Marv!
You can never have enough KAC!
Re: URX III availability?
We were actually eye-balling one that Trey brought down on a SR15 e3 rifle and it looks like the only modification that would be required to anything is the bottom two corners of the gas block may need to be shaved down a little bit just to clear the lower half of the rail. But we won't know for sure till we get it on. I will post pics if I get a chance.
- pacrimguru
- Silent But Deadly
- Posts: 241
- Joined: Thu Nov 26, 2009 4:32 am
- Location: California
- Contact:
Re: URX III availability?
if the internal dimensions are the same as the rifle length URX II, which i imagine they are, yes, all you need to do is shave the bottom corners of the gas block for the bottom rail to fit. i did it with my sr-15 e3.
you can see the gas block under the first set of holes in this pic:
you can see the gas block under the first set of holes in this pic:
visit: www.valkyrietactical.com
- KevinB
- Silent But Deadly
- Posts: 1100
- Joined: Fri Feb 27, 2009 10:38 am
- Location: Northern VA
- Contact:
Re: URX III availability?
The P/N 20547-3 URXII Rifle Length rail does not have a relief cut for the midlength gas block.
The URXIII Rifle Length (P/N 30005-3) rail does have a cut for the midlength gas block.
What will happen is the URXII rail appears to fit but the gas block will rub (unless the top of the block is taken down a bit)
The URXIII Rifle Length (P/N 30005-3) rail does have a cut for the midlength gas block.
What will happen is the URXII rail appears to fit but the gas block will rub (unless the top of the block is taken down a bit)
Kevin S. Boland
Director of Military Operations
Knight's Armament Company
701 Columbia Blvd.
Titusville, Fl 32780
Ph 321-607-9956
Cell 407-451-4544
Fax 321-383-2143
http://www.knightarmco.com
Director of Military Operations
Knight's Armament Company
701 Columbia Blvd.
Titusville, Fl 32780
Ph 321-607-9956
Cell 407-451-4544
Fax 321-383-2143
http://www.knightarmco.com
Re: URX III availability?
When will the SR25 models be available???
Re: URX III availability?
ThisTanasoo wrote:When will the SR25 models be available???
And does it have the spring loaded sight like the magpul edition?
- Jon Consiglio
- Member
- Posts: 25
- Joined: Thu Feb 03, 2011 2:33 pm
- Location: Corpus Christi, Texas
Re: URX III availability?
Can rail sections be added to this one? Not that it's really necessary, I'm just curious as it looks like the added sections would be much thinner than the LW URX II using MOE sections.
I'd really like to be able to add a very tin section of rail to the right side for my gear sector scout mount and possibly a very thin section on the bottom for an AFG. The MOE sections work obviously,but make it quite thick since the MOE sections were intended to be used on a flatter surface.
I'm looking at getting a mount fit to the slick rail itself so there's no need to add a section there, just not sure how it'll work out yet.
Jonathan
I'd really like to be able to add a very tin section of rail to the right side for my gear sector scout mount and possibly a very thin section on the bottom for an AFG. The MOE sections work obviously,but make it quite thick since the MOE sections were intended to be used on a flatter surface.
I'm looking at getting a mount fit to the slick rail itself so there's no need to add a section there, just not sure how it'll work out yet.
Jonathan
Re: URX III availability?
http://www.ar15.com/forums/topic.html?b ... 1&t=202725
If anyone is looking for a URX III this guy has a few. I picked one up for $340 Shipped. Or PM me and I will put you in contact with him.
If anyone is looking for a URX III this guy has a few. I picked one up for $340 Shipped. Or PM me and I will put you in contact with him.
Re: URX III availability?
13.1 oz when we weighed them.este wrote:Weight?
Re: URX III availability?
Will the URXIII work with a rifle length gas block?