PTR 91 Question
- 03RangerXLT
- Silent Operator
- Posts: 83
- Joined: Mon Jul 09, 2007 10:24 am
- Location: Cherokee Co.
PTR 91 Question
Hey guys. Quick question here. I used to own a CAI Cetme. I didn't shoot it much because I was always told that if I fired commercial spec .308 thru it and not NATO 7.62, I would have problems with the extractor ripping the cases apart and then double feeding a round into the carcass of the spent and shredded shell casing. Is this something to worry about with the PTR 91? I am goign to be leaving for work in a minute here and I am thinking of stopping by the gun store to buy a PTR91.
-J. L. Battersby
"Criminals thrive on the indulgence of society's understanding."
"Criminals thrive on the indulgence of society's understanding."
My PTR91 funtions great.
It throws brass all over the place if you don't put a brass catcher on it.
They come out w/a corrugated-smoked effect from the fluted chamber & the blow back action.
I mostly shoot reloads w/no problems.
Also they are accurate!
I'm going to get my barrel threaded (it is an early one under Clinton's era) so I can put my 7.62 sd on it to reduce the muzzle blast from 18" barrel.
It throws brass all over the place if you don't put a brass catcher on it.
They come out w/a corrugated-smoked effect from the fluted chamber & the blow back action.
I mostly shoot reloads w/no problems.
Also they are accurate!
I'm going to get my barrel threaded (it is an early one under Clinton's era) so I can put my 7.62 sd on it to reduce the muzzle blast from 18" barrel.