Silencertalk AR Picture Thread
Silencertalk AR Picture Thread
ETA: Let's establish a couple of guidelines here.
1) Keep the pictures to 1024 pixels wide so as not totally throw off the formatting. Pictures wider will be converted to links starting 11/1/09 without warning.
2) When quoting a post with a picture in it, convert the "img" to "url" so that it shows up as a link and not a picture for the same reason above. and like #1, posts will be edited to make the conversion beginning 11/1/09.
Lots of sites do this, and they are usually pretty interesting and a good way for people to share ideas and information. It will remain a sticky.
A few of mine.
1) Keep the pictures to 1024 pixels wide so as not totally throw off the formatting. Pictures wider will be converted to links starting 11/1/09 without warning.
2) When quoting a post with a picture in it, convert the "img" to "url" so that it shows up as a link and not a picture for the same reason above. and like #1, posts will be edited to make the conversion beginning 11/1/09.
Lots of sites do this, and they are usually pretty interesting and a good way for people to share ideas and information. It will remain a sticky.
A few of mine.
Last edited by rob_s on Wed Oct 28, 2009 7:53 am, edited 1 time in total.
WWW.TACTICALYELLOWVISOR.NET
IBMM....
* Colt M4, 5.56mm, 1:7 Twist, 14.5 Inch Barrel
* KAC Front Rail
* LMT SOPMOD Stock
* Magpul MIAD Grip
* KAC QDSS-NT4 Silencer
* LDI DBAL-A2 AN/PEQ15A
* Aimpoint M4S Red Dot Optic On ADM Mount
* Ambidexterous Selector
* Vickers Combat Applications Sling
* LMT/MRP, 5.56mm, 1:7 Twist, 16 Inch Barrel
* AAC M4/SPR Silencer
* L3/EOTECH 552.A65/1 Red Dot Optic On LaRue Mount
* Amibdexterous Selector With 2 Stage Trigger
* Vickers Combat Applications Sling
* Troy Front And Rear Backup Sights
* Harris Bipod
* Magpul 20 Round PMAGs
* Colt M4, 5.56mm, 1:7 Twist, 14.5 Inch Barrel
* KAC Front Rail
* LMT SOPMOD Stock
* Magpul MIAD Grip
* KAC QDSS-NT4 Silencer
* LDI DBAL-A2 AN/PEQ15A
* Aimpoint M4S Red Dot Optic On ADM Mount
* Ambidexterous Selector
* Vickers Combat Applications Sling
* LMT/MRP, 5.56mm, 1:7 Twist, 16 Inch Barrel
* AAC M4/SPR Silencer
* L3/EOTECH 552.A65/1 Red Dot Optic On LaRue Mount
* Amibdexterous Selector With 2 Stage Trigger
* Vickers Combat Applications Sling
* Troy Front And Rear Backup Sights
* Harris Bipod
* Magpul 20 Round PMAGs
- kalikraven
- Elite Member
- Posts: 2944
- Joined: Thu Jul 06, 2006 4:48 pm
- Location: Florida
Stick
I've done work photography work with 45 or so manufacturers within the firearm community, my images have been used for catalogs, magazines, covers, etc. I have also shot work for the US Military. I am prior service and a full time LEO.
I now also shoot and write for Military Times. My primary focus will stay with weapons, accessories and related equipment reviews. Manufacturers can reach me through any of the boards. Have something new? Let me know.
http://www.flickr.com/photos/stickgunner
I've done work photography work with 45 or so manufacturers within the firearm community, my images have been used for catalogs, magazines, covers, etc. I have also shot work for the US Military. I am prior service and a full time LEO.
I now also shoot and write for Military Times. My primary focus will stay with weapons, accessories and related equipment reviews. Manufacturers can reach me through any of the boards. Have something new? Let me know.
http://www.flickr.com/photos/stickgunner
nwcid you look like your having to much fun in the last picture.
Here is some of my AR family, I have 6 more that I need to take pics of.
.
AR45
.
AR22lr pistol
.
AR22lr carb
.
another AR45, this upper went to SRT and became a integeral suppressed and is sitting at my dealer waiting for a stamp.
.
AR223 varminter
.
A couple of AR9mm's
.
another AR22lr
.
Another AR45 with a SRT Integeral
Here is some of my AR family, I have 6 more that I need to take pics of.
.
AR45
.
AR22lr pistol
.
AR22lr carb
.
another AR45, this upper went to SRT and became a integeral suppressed and is sitting at my dealer waiting for a stamp.
.
AR223 varminter
.
A couple of AR9mm's
.
another AR22lr
.
Another AR45 with a SRT Integeral
Last edited by redtazdog on Mon Oct 20, 2008 11:04 pm, edited 1 time in total.
redtazdog wrote:nwcid you look like your having to much fun in the last picture.
Here is some of my AR family, I have 6 more that I need to take pics of.
Well that last one is my buddy. I am the one with the red head
We need to chat about a couple of your guns.......
AR45
Very cool. I have a ton of GG mags for my USC M3 conversion. I have thought about doing an AR like this either suppressed or not. I keep seeing bits and pieces about these lowers but have not figured out the best/easiest way to do it yet. Admitly I have not looked that hard yet either.
How did you go about getting this lower and about what did it cost?
Did you do the "paint" or did you have it done?
Anything you really do or dont like about it?
I know you dont have the suppressed upper done for it yet but wondering if it is worth it. I have been thinking about doing my USC but there is no "good" way to suppress it without SBR (not legal in WA).
I am looking at using that stock on my 300 Whisper build, what do you think of it?
AR22lr carb
One of my other sooner then later projects is a .22 AR. I have been thinking about doing an "M4" version since I dont have a M4 style now so I could cover two things with one gun (M4 look for collection and .22). What can you say about good, bad, other about .22 set ups?
I know there are getting to be more and more out there. Can I build one (I have done others and have tools) or are you better off just buying a complete one?
What kind of issues do these have?
.
M4/ SPR
Stick
I've done work photography work with 45 or so manufacturers within the firearm community, my images have been used for catalogs, magazines, covers, etc. I have also shot work for the US Military. I am prior service and a full time LEO.
I now also shoot and write for Military Times. My primary focus will stay with weapons, accessories and related equipment reviews. Manufacturers can reach me through any of the boards. Have something new? Let me know.
http://www.flickr.com/photos/stickgunner
I've done work photography work with 45 or so manufacturers within the firearm community, my images have been used for catalogs, magazines, covers, etc. I have also shot work for the US Military. I am prior service and a full time LEO.
I now also shoot and write for Military Times. My primary focus will stay with weapons, accessories and related equipment reviews. Manufacturers can reach me through any of the boards. Have something new? Let me know.
http://www.flickr.com/photos/stickgunner
- karmapolice
- Silent But Deadly
- Posts: 171
- Joined: Sun Jul 01, 2007 7:49 pm
- Location: Atlanta, Georgia
- ArevaloSOCOM
- Silencertalk Goon Squad
- Posts: 17511
- Joined: Sat May 20, 2006 1:22 am
- Location: London, England
- Contact:
- karmapolice
- Silent But Deadly
- Posts: 171
- Joined: Sun Jul 01, 2007 7:49 pm
- Location: Atlanta, Georgia
It's a BFG Redimag
http://blueforcegear.com/product.cfm?ty ... prod_id=91
http://blueforcegear.com/product.cfm?ty ... prod_id=91
WWW.TACTICALYELLOWVISOR.NET
Stick
I've done work photography work with 45 or so manufacturers within the firearm community, my images have been used for catalogs, magazines, covers, etc. I have also shot work for the US Military. I am prior service and a full time LEO.
I now also shoot and write for Military Times. My primary focus will stay with weapons, accessories and related equipment reviews. Manufacturers can reach me through any of the boards. Have something new? Let me know.
http://www.flickr.com/photos/stickgunner
I've done work photography work with 45 or so manufacturers within the firearm community, my images have been used for catalogs, magazines, covers, etc. I have also shot work for the US Military. I am prior service and a full time LEO.
I now also shoot and write for Military Times. My primary focus will stay with weapons, accessories and related equipment reviews. Manufacturers can reach me through any of the boards. Have something new? Let me know.
http://www.flickr.com/photos/stickgunner
dozermac wrote:stickman, what length barrel and tube?
Thanks
The last picture that shows a can is wearing a AAC M4/SPR on a 16" WOA barrel.
Stick
I've done work photography work with 45 or so manufacturers within the firearm community, my images have been used for catalogs, magazines, covers, etc. I have also shot work for the US Military. I am prior service and a full time LEO.
I now also shoot and write for Military Times. My primary focus will stay with weapons, accessories and related equipment reviews. Manufacturers can reach me through any of the boards. Have something new? Let me know.
http://www.flickr.com/photos/stickgunner
I've done work photography work with 45 or so manufacturers within the firearm community, my images have been used for catalogs, magazines, covers, etc. I have also shot work for the US Military. I am prior service and a full time LEO.
I now also shoot and write for Military Times. My primary focus will stay with weapons, accessories and related equipment reviews. Manufacturers can reach me through any of the boards. Have something new? Let me know.
http://www.flickr.com/photos/stickgunner