GlockandRoll wrote:No, but I would like to someday; I am afraid of reliability problems using a can on such a small auto.
Let us know when you do
Frank
"Certainly there is no hunting like the hunting of man and those who have hunted armed men long enough and liked it, never really care for anything else thereafter."
ZephyrNewYork wrote:Trust me man, I know a thing or two about carrying in the heat. When I was in a certain sandy country overseas three years ago, a lot of the time (thankfully not all the time), I carried an M16, Beretta M9, associated gear, etc., while wearing a kevlar helmet and Interceptor vest (exterior body armor) AND a concealable Level IIIA vest inside. The day before I flew back to the States, it had gotten up to 118 degrees F. It wasn't even full on summer yet. I'd rather wear all that stuff and sweat than be cool and get shot. How hot does it get where you live in TX? That wasn't the last time I carried in the heat either.
Frank
Why did you wear a IIIA vest under a IIIA vest (the interceptor is rated a IIIA if tested by the full NIJ standard)? I wonder if even 70+ layers of kevlar (2 IIIA vests) can stop a rifle round. Did you have rifle plates as well? If you go back I would contact these people, www.bulletproofme.com they sell side and shoulder plates. More comfortable then 2 vests and more protection.
That's what I wore. Believe it or not, I never got issued SAPI plates (Small Arms Protective Inserts) for my Interceptor. I had to BUY MY OWN ceramic plates at a gun show before we left California. SAPI plates don't provide full coverage; if you want to read more details, send me a PM.
At first, they told us that all the weapons and SAPI plates had been sent forward along with the rest of the stuf, and that we wouldn't get ours until we arrived in country. That's when I raised the BS flag and decided to buy a Glock and my own plates. But in Cali, you have to wait the silly ten day waiting period. I told them that I might be flying to a combat zone before the tenth day, which is what ended up happening. They didn't care-- I had to obey California law. I ended up getting issued an M16 and M9 anyway, just before we deployed. But sling, magazines, etc., were a different story. All this stuff had been sent forward for real. I tried to get some mags for the 9 and the 16, but all they had were the low cap mags since the Clinton Ban was still in effect. They still didn't care that I was about to leave for a combat zone. All the stalls at the gun show and all the gun shops near our base said they could only sell high caps to LE. I ended up buying some decent slings and kept one for myself, gave the others to some of my buddies. Once we arrived in country, we went around the camp scrounging for mags and other stuff. Just in time for The Push...
Have you noticed the difference between Level II and Level IIIA? The THICKNESS. There are more layers or Kevlar, Spectra, etc. in the higher levels, thus providing more protection. Also, early this year, or late last year, reports came out stating that the Corps had fielded a bunch of Interceptors that hadn't passed muster. Did you hear about that? It's better to wear something and not need it than to need it and not have it.
Needless to say, I made it back safely. Last summer, when I was stationed in Virginia, I took leave for several days. When I returned to VA, I discovered that my house had been broken into. Criminals stole a lot of my stuff, to include electronics. Among my belongings that were stolen were the plates that protected me during the war, and my bayonet. The other stuff didn't bother me much, but I was really pissed about the loss of those two items.
Frank
Thats some serious BS about the problems getting the gear you want. Honestly you should be able to buy and take with you anything you want (all civilians should be able to own any weapons they want.).
They level II I have is much thinner then the IIIA interceptor, but both are not bad at all. I'm sure if I add plates it will be much bulkier and heavier. Its all just for fun anyway, I *hopefully* won't have to worry about armed conflict anytime soon. I guess you never know when the SHTF though so its never hurts to have
"Certainly there is no hunting like the hunting of man and those who have hunted armed men long enough and liked it, never really care for anything else thereafter."
rsilvers wrote:
I carry a P7PSP in it now because I feel it is the safest gun ever made. If I leave it in a bathroom by mistake and someone finds it, they are very unlikely to shoot themselves -- or if a BG takes it from me.
Did you get Comptact to make a holster for the PSP? I live an hour from them and the best they ever offered was for me to bring my PSP by the shop and they would try to remold something for it.
I am NOT knocking Comptac. I too carry a P7M8 in the CTAC. But, I carry my PSP in a Sparks VMII. The VMII is more comfortable but isn't tuckable.
I bought one for the P7M8 and then took a heat-gun to it and a silicon oven mitt and then just pushed the plastic into the trigger guard. It worked out perfectly.
I would take them up on the re-mold offer. They will do what I did, but if they mess it up they will deal with it.
I do not tuck with this holster. I like the holster for comfort, etc.
bp_968 wrote:Why did you wear a IIIA vest under a IIIA vest (the interceptor is rated a IIIA if tested by the full NIJ standard)? I wonder if even 70+ layers of kevlar (2 IIIA vests) can stop a rifle round. Did you have rifle plates as well? If you go back I would contact these people, www.bulletproofme.com they sell side and shoulder plates. More comfortable then 2 vests and more protection.
"Certainly there is no hunting like the hunting of man and those who have hunted armed men long enough and liked it, never really care for anything else thereafter."
bp_968 wrote:Why did you wear a IIIA vest under a IIIA vest (the interceptor is rated a IIIA if tested by the full NIJ standard)? I wonder if even 70+ layers of kevlar (2 IIIA vests) can stop a rifle round. Did you have rifle plates as well? If you go back I would contact these people, www.bulletproofme.com they sell side and shoulder plates. More comfortable then 2 vests and more protection.
"Certainly there is no hunting like the hunting of man and those who have hunted armed men long enough and liked it, never really care for anything else thereafter."
I got an email back from OP. He needs plates to test...
Frank
"Certainly there is no hunting like the hunting of man and those who have hunted armed men long enough and liked it, never really care for anything else thereafter."
bp_968 wrote:
What I need to do is find a small light weight reliable pistol that I can pocket carry when I can't carry the glock. Due to medical problems (UC) I sometimes don't carry the glock because tightening the belt enough to keep the gun off the ground becomes very uncomfortable. A nice, light, pocket gun would be better then nothing in those cases.
Any suggestions?
bp
Stiff belt with suspenders -belt for holster to attach and suspenders to keep belt from falling down as it wouldn't be that loose.
Go see a leather shop and he can set you up with a nice matched set with buttons inside the belt for the suspender to attach too.
Pocket pistol - how small do you have to go - smallest I have is AMT 380 backup (single actiion w/ safety) or for .22LR berretta 21 - DA/SA w/safety. Some are suggesting Keltec 32 but I go Seecamp for 32.
"Trying to tax yourself into prosperity is like standing in a bucket and trying to pick yourself up by the handle." - Winston Churchill
Screw that, man. I'd much rather shoot someone else's plates for free
Frank
"Certainly there is no hunting like the hunting of man and those who have hunted armed men long enough and liked it, never really care for anything else thereafter."
My current carry piece, need to get a Kahr or a G26 for summer carry. Holster is a Milt Sparks VersaMax II, I have no idea why I don't have a pic of it.
soohwa wrote:My current carry piece, need to get a Kahr or a G26 for summer carry. Holster is a Milt Sparks VersaMax II, I have no idea why I don't have a pic of it.
Nice pic. Coincidentally, the G30 is half my carry package. And exact same ammo too!
Frank
"Certainly there is no hunting like the hunting of man and those who have hunted armed men long enough and liked it, never really care for anything else thereafter."
I usually carry a full-size 1911 in a Sparks Summer Special, and a Kahr PM9 Covert in a pocket holster.
If I don't have a 1911, then it's a HiPower. Same kind of holster.
If I don't feel I can conceal the 1911 under what I'm wearing, I go to my HK P7M8 in a BladeTech IWB.
I'm glad to see a few people on here who also carry P7s. Makes me feel at home. That's the easiest to shoot gun I've ever had. I also like being able to pop the striker/firing pin/spring out easily if I have to leave the gun unattended with little notice (running into the courthouse to take something to my attorney once is a good example).
Springfield s.s. compact in a Milt Sparks summer special which will also hold a S&W 3913 if Im in the mood.
Also a S&W .38 spec. hammerless airweight in a pocket holster.
Maybe the 3913 tucked in a back brace like a belly band with a western shirt with a snap front for quick access or a sweat shirt untucked.
If lazy a NAA mini derringer in a pocket holster, but I always carry something, always a 1911a1 in the truck.
Demand stringent background and mental health checks on your politicians.
Changed my carry gun from a Springfield Champion 4" 1911 to my Springfield XD-357 sig 4" Service model. Added the TFO sights which are just as bright at night as they are in the day. Like having 25 rounds of 357 sig with the spare mag.