I'm sure this has been asked a lot, but I can't seem to find the answer anywhere so I figured I'd just ask myself. Sorry if this is a newbie question that you get a lot!
Anyway I am trying to find out if the current production KAC QD Flash Hider is long enough to bring a Colt 14.5" M4 barrel to 16" if pinned?
TIA!
NT4 QD Flash Hider Question
- bad timing
- Silent But Deadly
- Posts: 251
- Joined: Tue Jul 15, 2008 4:37 am
- 1_ar_newbie
- Industry Professional
- Posts: 1975
- Joined: Mon Jan 14, 2008 8:31 pm
- Location: Atlanta, GA
I wouldn't do it this way if you want to mount the NT4 silencer on it. However, if you didn't need to mount the silencer that would be the way to do it.KevinB wrote:You can use a crush washer and some shims to make it long enough to be blind pinned in place.
Just my .02
Mike Mers
L.E. and Commercial Sales
Advanced Armament Corp.
770-925-9988 x 101 (phone)
770-925-9989 (fax)
[email protected]
Gun Gallery 4 Life!
L.E. and Commercial Sales
Advanced Armament Corp.
770-925-9988 x 101 (phone)
770-925-9989 (fax)
[email protected]
Gun Gallery 4 Life!
- KevinB
- Silent But Deadly
- Posts: 1100
- Joined: Fri Feb 27, 2009 10:38 am
- Location: Northern VA
- Contact:
Good point, I generally assume people who don't SBR won't have a can, but I could be wrong.1_ar_newbie wrote:I wouldn't do it this way if you want to mount the NT4 silencer on it. However, if you didn't need to mount the silencer that would be the way to do it.KevinB wrote:You can use a crush washer and some shims to make it long enough to be blind pinned in place.
Just my .02
Kevin S. Boland
Director of Military Operations
Knight's Armament Company
701 Columbia Blvd.
Titusville, Fl 32780
Ph 321-607-9956
Cell 407-451-4544
Fax 321-383-2143
http://www.knightarmco.com
Director of Military Operations
Knight's Armament Company
701 Columbia Blvd.
Titusville, Fl 32780
Ph 321-607-9956
Cell 407-451-4544
Fax 321-383-2143
http://www.knightarmco.com