About changing up my competition rig and thinking that I might take and put a JP midlength rail on it and drop back to an 11.5 barrel.
This is my question, does anyone know if My m41k 08 will fit in the JP rail? They say its got an inner diameter of 1.75 inches and I havent measured the diameter of my can.
So Im thinking
Moderator: SilentMike
- Outsydlooknin75
- Senior Silent Operator
- Posts: 106
- Joined: Tue Apr 07, 2009 1:58 pm
So Im thinking
If you can read this thank a teacher, if you can read this in English thank a soldier.
-
- Silent But Deadly
- Posts: 3864
- Joined: Sun Apr 06, 2008 7:47 am
- Location: Chattanooga, TN
- Contact:
http://www.advanced-armament.com/product.aspx?pid=48
M4-1k is 1.5" in diameter so since it doesn't have the latch like the M4-2k you should be good to go.
M4-1k is 1.5" in diameter so since it doesn't have the latch like the M4-2k you should be good to go.
- 1_ar_newbie
- Industry Professional
- Posts: 1975
- Joined: Mon Jan 14, 2008 8:31 pm
- Location: Atlanta, GA
Yep... Post pics if you do it...st33ve0 wrote:http://www.advanced-armament.com/product.aspx?pid=48
M4-1k is 1.5" in diameter so since it doesn't have the latch like the M4-2k you should be good to go.
Mike Mers
L.E. and Commercial Sales
Advanced Armament Corp.
770-925-9988 x 101 (phone)
770-925-9989 (fax)
[email protected]
Gun Gallery 4 Life!
L.E. and Commercial Sales
Advanced Armament Corp.
770-925-9988 x 101 (phone)
770-925-9989 (fax)
[email protected]
Gun Gallery 4 Life!