AAC BLOG UPDATE: In the Boss's Office
Moderator: SilentMike
AAC BLOG UPDATE: In the Boss's Office
Kick Ass Design
- smcharchan
- Silent But Deadly
- Posts: 2268
- Joined: Thu Dec 20, 2007 6:06 am
- Location: VA
- James DeGroat
- Elite Industry Professional
- Posts: 988
- Joined: Mon Apr 25, 2005 6:27 pm
- Location: New Mexico
- Contact:
Haven't seen that gun in a while.
smcharchan,
You mean suppressed like this:
I did this suppressor my Minigun a while back.
smcharchan,
You mean suppressed like this:
I did this suppressor my Minigun a while back.
Last edited by James DeGroat on Fri Oct 09, 2009 12:00 am, edited 1 time in total.
James DeGroat
President
DeGroat Tactical Armaments, LLC.
www.ArmamentSales.com
Specializing in the 7.62mm Minigun, Suppressors, and NFA Weapons/Accessories (including Artillery and Flame Throwers).
President
DeGroat Tactical Armaments, LLC.
www.ArmamentSales.com
Specializing in the 7.62mm Minigun, Suppressors, and NFA Weapons/Accessories (including Artillery and Flame Throwers).
- Outsydlooknin75
- Senior Silent Operator
- Posts: 106
- Joined: Tue Apr 07, 2009 1:58 pm
Reading that makes me wish I had a fab shop.JasonAAC wrote:James- current status is safely and permanently in KB's collection- He is thinking about vehicles and vehicle mounts for it.James DeGroat wrote:Haven't seen that gun in a while.
smcharchan,
You mean suppressed like this:
I did this suppressor for one of guns a while back.
If you can read this thank a teacher, if you can read this in English thank a soldier.
- Fro1911nut
- Silent Operator
- Posts: 59
- Joined: Sun Jul 06, 2008 7:11 pm
- Location: NW GA
- James DeGroat
- Elite Industry Professional
- Posts: 988
- Joined: Mon Apr 25, 2005 6:27 pm
- Location: New Mexico
- Contact:
Fro1911nut wrote:James DeGroat wrote:Haven't seen that gun in a while.
smcharchan,
You mean suppressed like this:
I did this suppressor for one of guns a while back.
I do, but it's not one I will be posting. Suppressor is not as quite as I would like and I need to go back to the drawing board to fine tune it.
Do u have any video of this thing firing?
James DeGroat
President
DeGroat Tactical Armaments, LLC.
www.ArmamentSales.com
Specializing in the 7.62mm Minigun, Suppressors, and NFA Weapons/Accessories (including Artillery and Flame Throwers).
President
DeGroat Tactical Armaments, LLC.
www.ArmamentSales.com
Specializing in the 7.62mm Minigun, Suppressors, and NFA Weapons/Accessories (including Artillery and Flame Throwers).
-
- Silent But Deadly
- Posts: 3864
- Joined: Sun Apr 06, 2008 7:47 am
- Location: Chattanooga, TN
- Contact:
The minigun is 3,000-4,000 rpm right? So that breaks down to 500-667 rpm per barrel...that's less than an M240 so it should be doable...this is all speculative of courseJames DeGroat wrote:Fro1911nut wrote:James DeGroat wrote:Haven't seen that gun in a while.
smcharchan,
You mean suppressed like this:
I did this suppressor for one of guns a while back.
I do, but it's not one I will be posting. Suppressor is not as quite as I would like and I need to go back to the drawing board to fine tune it.
Do u have any video of this thing firing?
- James DeGroat
- Elite Industry Professional
- Posts: 988
- Joined: Mon Apr 25, 2005 6:27 pm
- Location: New Mexico
- Contact:
Yep it's do able, but there are a few other things that have to be worked out besides the rate of fire per barrel issue. I have most of them worked out and now I just need to sit down redo my design a little and build another test unit.st33ve0 wrote:The minigun is 3,000-4,000 rpm right? So that breaks down to 500-667 rpm per barrel...that's less than an M240 so it should be doable...this is all speculative of courseJames DeGroat wrote:Fro1911nut wrote:
I do, but it's not one I will be posting. Suppressor is not as quite as I would like and I need to go back to the drawing board to fine tune it.
Do u have any video of this thing firing?
James DeGroat
President
DeGroat Tactical Armaments, LLC.
www.ArmamentSales.com
Specializing in the 7.62mm Minigun, Suppressors, and NFA Weapons/Accessories (including Artillery and Flame Throwers).
President
DeGroat Tactical Armaments, LLC.
www.ArmamentSales.com
Specializing in the 7.62mm Minigun, Suppressors, and NFA Weapons/Accessories (including Artillery and Flame Throwers).
- James DeGroat
- Elite Industry Professional
- Posts: 988
- Joined: Mon Apr 25, 2005 6:27 pm
- Location: New Mexico
- Contact:
Ok so you wanted a video of my Minigun suppressor.
This is a clip from the very first test fire
Enjoy
Right Click and Save Target for Video 3.26mb
This is a clip from the very first test fire
Enjoy
Right Click and Save Target for Video 3.26mb
James DeGroat
President
DeGroat Tactical Armaments, LLC.
www.ArmamentSales.com
Specializing in the 7.62mm Minigun, Suppressors, and NFA Weapons/Accessories (including Artillery and Flame Throwers).
President
DeGroat Tactical Armaments, LLC.
www.ArmamentSales.com
Specializing in the 7.62mm Minigun, Suppressors, and NFA Weapons/Accessories (including Artillery and Flame Throwers).
- mcmillanman5
- Silent But Deadly
- Posts: 799
- Joined: Wed Dec 06, 2006 7:23 pm
- Location: ID
- James DeGroat
- Elite Industry Professional
- Posts: 988
- Joined: Mon Apr 25, 2005 6:27 pm
- Location: New Mexico
- Contact:
yeah I've been fairly busy lately and then I've also been out of town a lot.mcmillanman5 wrote:Hey James,
Good to see you back posting. Do you have video of the actual firing?
I'm going to try and get back in the swing of being on the boards again like I used to.
I do
James DeGroat
President
DeGroat Tactical Armaments, LLC.
www.ArmamentSales.com
Specializing in the 7.62mm Minigun, Suppressors, and NFA Weapons/Accessories (including Artillery and Flame Throwers).
President
DeGroat Tactical Armaments, LLC.
www.ArmamentSales.com
Specializing in the 7.62mm Minigun, Suppressors, and NFA Weapons/Accessories (including Artillery and Flame Throwers).
- James DeGroat
- Elite Industry Professional
- Posts: 988
- Joined: Mon Apr 25, 2005 6:27 pm
- Location: New Mexico
- Contact:
- smcharchan
- Silent But Deadly
- Posts: 2268
- Joined: Thu Dec 20, 2007 6:06 am
- Location: VA
I believe that I saw your previous posts on that when you were building it James. Beautiful work!
I see engraving on the housing of the suppressor. Am I correct in assuming it is one registered piece vice multiple cans?
I like how you think outside the box with stuff like this, your longer 9mm cans, the purpose-built 300 whisper cans, etc.
I see engraving on the housing of the suppressor. Am I correct in assuming it is one registered piece vice multiple cans?
I like how you think outside the box with stuff like this, your longer 9mm cans, the purpose-built 300 whisper cans, etc.
- Fro1911nut
- Silent Operator
- Posts: 59
- Joined: Sun Jul 06, 2008 7:11 pm
- Location: NW GA
James DeGroat wrote:Ok so you wanted a video of my Minigun suppressor.
This is a clip from the very first test fire
Enjoy
Right Click and Save Target for Video 3.26mb
Why do u have to toy with my emotions like that lol...how about the first 30 secs of that clip
M4 1000
Pilot
SWR Omega
Polite Society built Noveske/Saber asskicking SBR
Pilot
SWR Omega
Polite Society built Noveske/Saber asskicking SBR