ACC REBAR CUTTER redux...
Moderator: SilentMike
- firefighter509
- Silent But Deadly
- Posts: 363
- Joined: Tue Jan 13, 2009 2:33 am
ACC REBAR CUTTER redux...
OK when can we expect these and I don't care if it is a 200 stamp I have to have one of these. This looks like it has the potential to be the new Kx3.
GOOD JOB AAC R&D
http://www.flickr.com/photos/stickgunne ... 602877243/
GOOD JOB AAC R&D
http://www.flickr.com/photos/stickgunne ... 602877243/
Last edited by firefighter509 on Mon Jan 28, 2013 1:44 am, edited 7 times in total.
I MAY DIE IN A DITCH, BUT I WILL BE LYING IN A BED OF BRASS!
LIKE REGAN WATCH THIS:
http://www.youtube.com/watch?v=49zqB6qV7hI&feature=related
LIKE REGAN WATCH THIS:
http://www.youtube.com/watch?v=49zqB6qV7hI&feature=related
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
What are you talking about?
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
Is that the new Blackout anti tuning fork device?
Last edited by Cira on Sun May 23, 2010 6:05 am, edited 1 time in total.
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
We've had those out for awhile for mil and gov customers... do you really need to get through rebar often enough to it worth it? It IS cool though!
http://www.aacblog.com/?p=5417
http://www.aacblog.com/?p=5417
Last edited by JasonAAC on Sun May 23, 2010 5:23 pm, edited 1 time in total.
Kick Ass Design
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
I want to weld foot pegs on it and use it like an automatic pogo stick. Put it on an M-16 lower and you'd have the fastest pogo stick EVAR!
-
- Member
- Posts: 37
- Joined: Fri Feb 27, 2009 6:29 pm
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
So if someone wanted to go through the nfa process to own would you sell us one,how much is it?
- firefighter509
- Silent But Deadly
- Posts: 363
- Joined: Tue Jan 13, 2009 2:33 am
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
analogphotographer wrote:So if someone wanted to go through the nfa process to own would you sell us one,how much is it?
YES YES YES,
I want to do this, let makes it happen. I want one so bad. Stickman has one I !!!!!!
I MAY DIE IN A DITCH, BUT I WILL BE LYING IN A BED OF BRASS!
LIKE REGAN WATCH THIS:
http://www.youtube.com/watch?v=49zqB6qV7hI&feature=related
LIKE REGAN WATCH THIS:
http://www.youtube.com/watch?v=49zqB6qV7hI&feature=related
- silencertalk
- Site Admin
- Posts: 33978
- Joined: Mon Apr 25, 2005 8:31 am
- Location: USA
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
I don't think it was an ATF decision. The concern is getting fragged from shooting steel up close. The military does their own safety testing and then takes responsibility.
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
I want one just for the cool factor, I dont think I would ever use it to shoot steel up close.
- firefighter509
- Silent But Deadly
- Posts: 363
- Joined: Tue Jan 13, 2009 2:33 am
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
rsilvers wrote:I don't think it was an ATF decision. The concern is getting fragged from shooting steel up close. The military does their own safety testing and then takes responsibility.
Thats like saying, your cant have a firearm or dare i say it "suppressor" because your going to shoot it / shoot something with it. This type of logic is will end the sale / ownership of civilians of firearms / firearms accessories IE: (Assault Weapons Ban). Furthermore there is a responsibility the comes with the ownership of anything involving rifles, pistols ECT. , and its not like this is the only rebar cutter ever produced for a AR, LMT makes a similar item. (see picture) if "responsibility" is the only missing pare to this. Then ill sign any release of liability waver you got.
Not trying to be an ass, just really hyped up about all your products and how freaking cool they are, I am looking at a m4-2000 to go next to my 762-SD and tirant-9 and would love to have this option in place of the blackout when and where the situation permits (I am thinking it will act like a KX3) might me wrong but that bring me to my next point.
Is there any way we could get some video of this thing firing or possible in action? I think that would maybe quell the need to obtain this. (or more likely) Create a firestorm of people wanting it.
J
I MAY DIE IN A DITCH, BUT I WILL BE LYING IN A BED OF BRASS!
LIKE REGAN WATCH THIS:
http://www.youtube.com/watch?v=49zqB6qV7hI&feature=related
LIKE REGAN WATCH THIS:
http://www.youtube.com/watch?v=49zqB6qV7hI&feature=related
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
Liability is a concern, .... edited for future clarification.
Last edited by JasonAAC on Sun May 23, 2010 5:23 pm, edited 1 time in total.
Kick Ass Design
- firefighter509
- Silent But Deadly
- Posts: 363
- Joined: Tue Jan 13, 2009 2:33 am
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
Thanks Jason,
Though is not way is this making it easier on this AAC fan boy.
J
Though is not way is this making it easier on this AAC fan boy.
J
Last edited by firefighter509 on Sun May 23, 2010 1:33 pm, edited 2 times in total.
I MAY DIE IN A DITCH, BUT I WILL BE LYING IN A BED OF BRASS!
LIKE REGAN WATCH THIS:
http://www.youtube.com/watch?v=49zqB6qV7hI&feature=related
LIKE REGAN WATCH THIS:
http://www.youtube.com/watch?v=49zqB6qV7hI&feature=related
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
Raabe wrote:What are you talking about?
I think he is talking about how dead sexy the pictures are!
Stick
I've done work photography work with 45 or so manufacturers within the firearm community, my images have been used for catalogs, magazines, covers, etc. I have also shot work for the US Military. I am prior service and a full time LEO.
I now also shoot and write for Military Times. My primary focus will stay with weapons, accessories and related equipment reviews. Manufacturers can reach me through any of the boards. Have something new? Let me know.
http://www.flickr.com/photos/stickgunner
I've done work photography work with 45 or so manufacturers within the firearm community, my images have been used for catalogs, magazines, covers, etc. I have also shot work for the US Military. I am prior service and a full time LEO.
I now also shoot and write for Military Times. My primary focus will stay with weapons, accessories and related equipment reviews. Manufacturers can reach me through any of the boards. Have something new? Let me know.
http://www.flickr.com/photos/stickgunner
- firefighter509
- Silent But Deadly
- Posts: 363
- Joined: Tue Jan 13, 2009 2:33 am
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
Stickman I am a huge fan and yes, I have been looking at you photo-stream and damn talk about GUN PORN , I am currently building a m4 with the m4a1 RAS II rail now thanks to you. Going to pick up one a rainier on Monday. (NEED A MAGPUL LOWER) I think you put subliminal messages in those pictures, I cant stop thinking "buy buy buy, must have, buy buy buy". Have you happened to get any video from the Mil unit you leased your rebar cutter to?Stickman wrote:Raabe wrote:What are you talking about?
I think he is talking about how dead sexy the pictures are!
J
I MAY DIE IN A DITCH, BUT I WILL BE LYING IN A BED OF BRASS!
LIKE REGAN WATCH THIS:
http://www.youtube.com/watch?v=49zqB6qV7hI&feature=related
LIKE REGAN WATCH THIS:
http://www.youtube.com/watch?v=49zqB6qV7hI&feature=related
- silencertalk
- Site Admin
- Posts: 33978
- Joined: Mon Apr 25, 2005 8:31 am
- Location: USA
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
Are you going to make anyone you sell it to also sign the waiver? I guess that can be in the first waiver.firefighter509 wrote: Then ill sign any release of liability waver you got.
- firefighter509
- Silent But Deadly
- Posts: 363
- Joined: Tue Jan 13, 2009 2:33 am
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
I wont sell it and ill be adding in in the trust with the other AAC NFA goodies. You could also make put in the waver that I am bound by a legal contract (ie. the waver) not to sell the Item and or transfer ownership other than to return to AAC. I really don't care this is just a must have item, that I would really like to have.rsilvers wrote:Are you going to make anyone you sell it to also sign the waiver? I guess that can be in the first waiver.firefighter509 wrote: Then ill sign any release of liability waver you got.
J
I MAY DIE IN A DITCH, BUT I WILL BE LYING IN A BED OF BRASS!
LIKE REGAN WATCH THIS:
http://www.youtube.com/watch?v=49zqB6qV7hI&feature=related
LIKE REGAN WATCH THIS:
http://www.youtube.com/watch?v=49zqB6qV7hI&feature=related
- silencertalk
- Site Admin
- Posts: 33978
- Joined: Mon Apr 25, 2005 8:31 am
- Location: USA
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
I like it also. I think it is cool. I want one. I don't have one.
I really don't think more than a few people would buy them. Like under 10.
I really don't think more than a few people would buy them. Like under 10.
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
What kind of money are we talking here??
"None are more hopelessly enslaved than those who falsely believe they are free." -Goethe
- firefighter509
- Silent But Deadly
- Posts: 363
- Joined: Tue Jan 13, 2009 2:33 am
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
SecondDavo5o wrote:What kind of money are we talking here??
I MAY DIE IN A DITCH, BUT I WILL BE LYING IN A BED OF BRASS!
LIKE REGAN WATCH THIS:
http://www.youtube.com/watch?v=49zqB6qV7hI&feature=related
LIKE REGAN WATCH THIS:
http://www.youtube.com/watch?v=49zqB6qV7hI&feature=related
- Outsydlooknin75
- Senior Silent Operator
- Posts: 106
- Joined: Tue Apr 07, 2009 1:58 pm
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
Instead of having them use a supressor mount .... which one would it use the SPR mount? 18tooth? 51 tooth? Would they be compatible with the brakes? Cause I know I sure would like an 18 tooth 1/2x28 brake.
How about just design them as a straight thread on, no mount used at all.
How about just design them as a straight thread on, no mount used at all.
If you can read this thank a teacher, if you can read this in English thank a soldier.
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
I would buy one for sure!
- silencertalk
- Site Admin
- Posts: 33978
- Joined: Mon Apr 25, 2005 8:31 am
- Location: USA
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
It would have to sell for too much - more than people would want to spend. There is no a good business model for this as a product.
- firefighter509
- Silent But Deadly
- Posts: 363
- Joined: Tue Jan 13, 2009 2:33 am
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
DAMN wonder what MIL is paying for these, must be high.
I would think for anything less than $350 I would be all over this. $400 and on would be reaching suppressor territory
J
I would think for anything less than $350 I would be all over this. $400 and on would be reaching suppressor territory
J
I MAY DIE IN A DITCH, BUT I WILL BE LYING IN A BED OF BRASS!
LIKE REGAN WATCH THIS:
http://www.youtube.com/watch?v=49zqB6qV7hI&feature=related
LIKE REGAN WATCH THIS:
http://www.youtube.com/watch?v=49zqB6qV7hI&feature=related
- silencertalk
- Site Admin
- Posts: 33978
- Joined: Mon Apr 25, 2005 8:31 am
- Location: USA
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
It is machined from a bar of 17-4 and not tubing. Also it is low volume.
- firefighter509
- Silent But Deadly
- Posts: 363
- Joined: Tue Jan 13, 2009 2:33 am
Re: OHHH DADY WANT'S DADY WANT'S!!!! ACC REBAR CUTTER
rsilvers wrote:It is machined from a bar of 17-4 and not tubing. Also it is low volume.
Damn silvers, you not making it any easier, that sounds sweet.
I MAY DIE IN A DITCH, BUT I WILL BE LYING IN A BED OF BRASS!
LIKE REGAN WATCH THIS:
http://www.youtube.com/watch?v=49zqB6qV7hI&feature=related
LIKE REGAN WATCH THIS:
http://www.youtube.com/watch?v=49zqB6qV7hI&feature=related