would an LCP need a Nielson device? Could I just use Ti for the tube and washer stack?
anyone who has experience with Browning based .380's please chime in.
Make me a silencer for an LCP and I'll pay for shipping!!!
- DorikinGTSt
- Silent But Deadly
- Posts: 433
- Joined: Tue Oct 25, 2005 8:30 am
- Contact:
- JC Weaponry
- Silent But Deadly
- Posts: 209
- Joined: Fri Mar 13, 2009 10:09 pm
- Location: Newberg, OR
- Contact:
Re: Make me a silencer for an LCP and I'll pay for shipping!
DeGroat Nano.
He's made them for the SIG P238's.
He's made them for the SIG P238's.
SIGnature SIGsauer Dealer
01/03 SOT
Newberg, OR
01/03 SOT
Newberg, OR
Re: Make me a silencer for an LCP and I'll pay for shipping!
Or that posiden from Thompson. But the LCP is pretty small so the nano might look better.
The threaded barrel may be the larger issue.
The threaded barrel may be the larger issue.
- DorikinGTSt
- Silent But Deadly
- Posts: 433
- Joined: Tue Oct 25, 2005 8:30 am
- Contact:
Re: Make me a silencer for an LCP and I'll pay for shipping!
indeed. the barrel has a flare at the end and getting it extended/threaded may not be worth it. I don't know if the flare is required mechanically, as I have seen 1911's with flared muzzles and many nowadays do not have them.
I suppose Green Mountain needs to tool up, or someone suggest a smith?
I suppose Green Mountain needs to tool up, or someone suggest a smith?
Re: Make me a silencer for an LCP and I'll pay for shipping!
It's the same pinched muzzle as the P3AT. Effectively the same gun, many interchangeable parts.
I recall reading a post from someone on some forum claiming they managed to get a P3AT threaded (expensively) but I never saw any pictures.
P.S. ... the PF9 has the same pinched barrel, I forgot I posted a link to what looks like a threaded PF9 in this thread. http://www.silencertests.com/forum/view ... 84&start=7
I recall reading a post from someone on some forum claiming they managed to get a P3AT threaded (expensively) but I never saw any pictures.
P.S. ... the PF9 has the same pinched barrel, I forgot I posted a link to what looks like a threaded PF9 in this thread. http://www.silencertests.com/forum/view ... 84&start=7
http://www.youtube.com/watch?v=BDtd2jNIwAU MUSAFAR!
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
- DorikinGTSt
- Silent But Deadly
- Posts: 433
- Joined: Tue Oct 25, 2005 8:30 am
- Contact:
Re: Make me a silencer for an LCP and I'll pay for shipping!
Do you know what vendor was displaying those guns? Seems 2 pf9's are threaded.
The Nano and Beretta w/ the slide~lock is very impressive. I will be needing KAC to whip one up for the LCP. I have some 100grn. cast lead bullets to be loaded in the 700fps range for just such an occasion.
The Nano and Beretta w/ the slide~lock is very impressive. I will be needing KAC to whip one up for the LCP. I have some 100grn. cast lead bullets to be loaded in the 700fps range for just such an occasion.
Re: Make me a silencer for an LCP and I'll pay for shipping!
Shooting cast lead bullets will warrant purchasing a suppressor that you can open and clean, so the Nano may be the best purchase. I've shot about 100 9mm cast bullets through my Cobra M2 and was really surprised at the amount of lead left behind. I've been shooting plated bullets since. Hope your project pans out and please post pics when you get it done!
Re: Make me a silencer for an LCP and I'll pay for shipping!
I believe that was KelTec themselves at some weekend shoot, I'll try to find another reference.DorikinGTSt wrote:Do you know what vendor was displaying those guns? Seems 2 pf9's are threaded.
...
Took a little while but here ya go ...
http://www.keltecweapons.com/news/3rd-q ... at-kel-tec
http://www.youtube.com/watch?v=BDtd2jNIwAU MUSAFAR!
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
-
- Silent But Deadly
- Posts: 1251
- Joined: Tue Nov 02, 2010 9:56 am
- Contact:
Re: Make me a silencer for an LCP and I'll pay for shipping!
Scrape some of that "lead" out and hit it with a tourch. Most times you will find that no silvery liquid comes out, which means its not lead. Im not saying it doesnt happen, because it does, but most times what people think is lead, is ussually not. Lead bullets require lube, which can come off in the can. Typically, if done correctly, lead bullets will leave less fouling behind in the bore than Jacketed bullets do. I tested a can with 300 rounds of cast bullets. It did have some fouling, but when you heat it, It doesnt turn into liquid lead, meaning it is of a different composition. If you get that much leading, you need to slug your bore and Mic it to see what is wrong with the setup. Ill have to figure out how to do a video so I can show you guys what I mean. If cast bullets are matched up to the gun correctly, there should be no lead at all in the can.ncsu90 wrote:Shooting cast lead bullets will warrant purchasing a suppressor that you can open and clean, so the Nano may be the best purchase. I've shot about 100 9mm cast bullets through my Cobra M2 and was really surprised at the amount of lead left behind. I've been shooting plated bullets since. Hope your project pans out and please post pics when you get it done!
Regards,
Aaron Fouraker
Co-Owner
Delta Company Arms, LLC
(918) 332-6503
[email protected]
www.deltacompanyarms.com
IN GOD WE TRUST.
Aaron Fouraker
Co-Owner
Delta Company Arms, LLC
(918) 332-6503
[email protected]
www.deltacompanyarms.com
IN GOD WE TRUST.