Guys,
I have an old High Standard 22 auto that is simply lovely. Never warmed up to the Colts or Rugers frankly.
Threaded barrels for the High Standard used to be widely available. Anyone know of a current source for reasonably priced threaded barrels?
Thanks!
Threaded barrel for old high standard Military Citation
Moderators: mpallett, mr fixit, bakerjw, renegade
- eastern_hunter
- Silent But Deadly
- Posts: 966
- Joined: Sat Nov 21, 2009 8:34 pm
- Location: Charleston, WV
Re: Threaded barrel for old high standard Military Citation
I haven't seen any.
I bought a new one from E-gunparts, along with a new front sight, I'm having my gunsmith turn it down, thread it, reset the front sight back in.
I bought a new one from E-gunparts, along with a new front sight, I'm having my gunsmith turn it down, thread it, reset the front sight back in.
- eastern_hunter
- Silent But Deadly
- Posts: 966
- Joined: Sat Nov 21, 2009 8:34 pm
- Location: Charleston, WV
Re: Threaded barrel for old high standard Military Citation
Brownell's has both High Standard barrels and barrels made from Douglas blanks. May have to take that route as well.
Randy, what barrel length are you going to shoot for after threading?
Randy, what barrel length are you going to shoot for after threading?
- eastern_hunter
- Silent But Deadly
- Posts: 966
- Joined: Sat Nov 21, 2009 8:34 pm
- Location: Charleston, WV
Re: Threaded barrel for old high standard Military Citation
Going to leave it at 5.5" or have it cut back some? 5.5" going to be a long package.
Have you ever heard a High Standard suppressed? Breech is very open. Wondering what additional noise that will cause.
Have you ever heard a High Standard suppressed? Breech is very open. Wondering what additional noise that will cause.
Re: Threaded barrel for old high standard Military Citation
I love the job the guy in Newport NH did on mine...
I had it threaded at factory for a while but the threading job was not very nice and the ammo was going super sonic.. SOOoo I had him cut it to 4" and rethread it. He also made a super nice thread protector.
I had it threaded at factory for a while but the threading job was not very nice and the ammo was going super sonic.. SOOoo I had him cut it to 4" and rethread it. He also made a super nice thread protector.
Long distance, the next best thing to being there!
- eastern_hunter
- Silent But Deadly
- Posts: 966
- Joined: Sat Nov 21, 2009 8:34 pm
- Location: Charleston, WV
Re: Threaded barrel for old high standard Military Citation
Very nice job indeed! I like the shorter bbl. What was the effect on accuracy?
Who is the fella in NH and what did he charge for the work?
Who is the fella in NH and what did he charge for the work?
Re: Threaded barrel for old high standard Military Citation
No loss of accuracy that *I* can tell ..eastern_hunter wrote:Very nice job indeed! I like the shorter bbl. What was the effect on accuracy?
Who is the fella in NH and what did he charge for the work?
Dick at Stoneagle He charged me $125.00 with my barrel. He has/is a SOT as well.
http://www.stoneagle.com/
http://www.stoneagle.com/Contact.htm
Long distance, the next best thing to being there!