FN PS90
FN PS90
At my local cop shop the guy there has two used gen 1 ps90 for 4 grand each. He said that you can legally auto convert them where you can't on the new model. I don't know anything on these weapons, please advise. He also said that the price on the gen 1 versions are going up and that they could be a good investment to buy now and sell in the future. Does anyone know if this is bs or what?
Re: FN PS90
He is feeding you a line of bull no way would I pay 4k for a gen 1 ps90. The only difference between the gen 1 and the newer models is there is an auto sear in the gen one that you would need for full auto. However the only legal way to convert them is if you have your sot. So unless you do dont even think about it. All that is is a ticket to federal pound me in the ass prison. Some people are willing to pay more for the gen 1 ps90s but not that much more.
Re: FN PS90
after a couple of hours of looking online that's all I could find too. unless you were a dealer and you got a dealer sample of the auto sear it's a basic waste of money.
- generaldisarray
- Silent But Deadly
- Posts: 388
- Joined: Sat Dec 12, 2009 10:59 am
- Location: sho me state
Re: FN PS90
Waste of money until civilization collapses and/or zombies roam the streets.
The truth is you're the weak. And I'm the tyranny of evil men. But I'm tryin, Ringo. I'm tryin' real hard to be the shepherd..... Jules Winnfield
Re: FN PS90
Nail on the head.lafsnguy wrote:He is feeding you a line of bull no way would I pay 4k for a gen 1 ps90. The only difference between the gen 1 and the newer models is there is an auto sear in the gen one that you would need for full auto. However the only legal way to convert them is if you have your sot. So unless you do dont even think about it. All that is is a ticket to federal pound me in the ass prison. Some people are willing to pay more for the gen 1 ps90s but not that much more.
The Gen 1 and Gen 2 have a front safety sear which also serves as the full auto sear in the P90. FNH was asked to change the trigger pack because of this and they have. A Gen 1 is no harder to convert to FA than any other, a determined person can do it with any of the trigger packs.
It is a sales tactic your dealer is exploiting VERY poorly. A gen 1 PS90 trigger pack is worth maybe $400 more than a gen 3(current) pack. The only people willing to pay that price are collectors.
DO NOT BUY a PS90 from the dealer you are talking to. If you do go back have him pull out one of the trigger packs and if they are Gen1 they will be SOLID Black/ODGreen. No gray at all, if the pack is gray and the hammer is black then it is a Gen 2.
I would tell this dealer to go and get BENT! I highly recommend buying a ps90, but the current prices are $1300 for a USG and $1560 for a Triple Rail.
Pure BullShit on your dealers part!
Hope that helps
- Selectedmarksman
- Silencertalk Goon Squad
- Posts: 6633
- Joined: Sun Oct 02, 2005 5:16 am
- Location: KY
Re: FN PS90
Don't buy anything from that dealer. He's either outright lying, or terribly uneducated in firearms law. Neither is a good quality in a dealer.
I've got Honey Badger Fever.
*Add this to your sig if you've got the fever, too!
*Add this to your sig if you've got the fever, too!
Re: FN PS90
Now I'm quite curious. How does one tell the difference in trigger packs? What dates were they made? I bought mine fairly shortly after they introduced the black stock, in 06 or 07.
RIP Dave. You will be missed.
- generaldisarray
- Silent But Deadly
- Posts: 388
- Joined: Sat Dec 12, 2009 10:59 am
- Location: sho me state
Re: FN PS90
The truth is you're the weak. And I'm the tyranny of evil men. But I'm tryin, Ringo. I'm tryin' real hard to be the shepherd..... Jules Winnfield
Re: FN PS90
That didn't actually help.
EDIT: After some digging, it seems that all PS90s have the same pack. That explains why I couldn't see a difference in the pictures...
Anyway, looking at the trigger pack, it seems it would take about 15 seconds to safely convert this to full-auto. It's very similar in principle to full-auto AKs and M16s. Neat. Scary how things like this never bug the BATFE enough to ban them...
EDIT: Yep, "A" is an auto-sear, there's a trip on the underside of the bolt, simply moving one spring on the disconnector C would mean that holding the trigger down would keep the hammer unlocked from the sear D, and when the bolt closes, the trip would move A out of the way, releasing the hammer.
Goddamn.
How did the BATFE miss this?
EDIT: After some digging, it seems that all PS90s have the same pack. That explains why I couldn't see a difference in the pictures...
Anyway, looking at the trigger pack, it seems it would take about 15 seconds to safely convert this to full-auto. It's very similar in principle to full-auto AKs and M16s. Neat. Scary how things like this never bug the BATFE enough to ban them...
EDIT: Yep, "A" is an auto-sear, there's a trip on the underside of the bolt, simply moving one spring on the disconnector C would mean that holding the trigger down would keep the hammer unlocked from the sear D, and when the bolt closes, the trip would move A out of the way, releasing the hammer.
Goddamn.
How did the BATFE miss this?
RIP Dave. You will be missed.
- silencertalk
- Site Admin
- Posts: 33978
- Joined: Mon Apr 25, 2005 8:31 am
- Location: USA
Re: FN PS90
Who cares - FA just wastes ammo. Lower hit probability = less dangerous to the target.
Re: FN PS90
Oh, agreed. It's just amusing that to convert a PS90 is about on-par with converting a semi-auto open-bolt in terms of difficulty. Not something I expected. I expected the removal of the trip, auto sear, etc., like on semi-auto AR15 and AK clones.
RIP Dave. You will be missed.
Re: FN PS90
I doubt that most people if permitted would purchase full autos. The appeal for most now is that its forbidden fruit.
I would be interested to see the number of assualt weapons manufactured and imported prior to 1986 versus the number of machine guns. I dont think that machine guns held much general appeal before the ban.
I would be interested to see the number of assualt weapons manufactured and imported prior to 1986 versus the number of machine guns. I dont think that machine guns held much general appeal before the ban.
Re: FN PS90
The internet, the knowledge that they're legal, changed that. Same for silencers - they're super popular and trending up because people now know they can own them. I'd still wager that if 922(o) went away, many people would get/convert something just for the novelty. Why SBR if you can just make it into an MG?
RIP Dave. You will be missed.
Re: FN PS90
FA is the best part of the 5.7x28 cartridge.silencertalk wrote:Who cares - FA just wastes ammo. Lower hit probability = less dangerous to the target.
Re: FN PS90
I would pay quite a bit for a civilian legal select fire P90.
You let me worry about being a waste of ammo.
You let me worry about being a waste of ammo.
-----
Ick
Ick
Re: FN PS90
Is that true?
So was it the FS2000 that had the the Safety Sear removed then?
So was it the FS2000 that had the the Safety Sear removed then?
PTK wrote:That didn't actually help.
EDIT: After some digging, it seems that all PS90s have the same pack. That explains why I couldn't see a difference in the pictures...
Anyway, looking at the trigger pack, it seems it would take about 15 seconds to safely convert this to full-auto. It's very similar in principle to full-auto AKs and M16s. Neat. Scary how things like this never bug the BATFE enough to ban them...
EDIT: Yep, "A" is an auto-sear, there's a trip on the underside of the bolt, simply moving one spring on the disconnector C would mean that holding the trigger down would keep the hammer unlocked from the sear D, and when the bolt closes, the trip would move A out of the way, releasing the hammer.
Goddamn.
How did the BATFE miss this?
Re: FN PS90
It is 100% true. I just checked 2011 production PS90s locally, they've all got the sear.
FS2000, I only saw the early ones - they had the sear, as well. I understand that the later ones do not.
FS2000, I only saw the early ones - they had the sear, as well. I understand that the later ones do not.
RIP Dave. You will be missed.
Re: FN PS90
Got-ya.
Thank you
I post sampled a PS90 and she runs great. Doing the same with an FS2000.
Both are early models though.
I thought FN pulled the safety sear on both the PS90 and the FS2000.
Good to know.
Thank you
I post sampled a PS90 and she runs great. Doing the same with an FS2000.
Both are early models though.
I thought FN pulled the safety sear on both the PS90 and the FS2000.
Good to know.
Re: FN PS90
Nope, it seems that the early (black) and later (gray) trigger packs are identical. See the picture a few posts above, too. The auto-sear is blatantly obvious.
PERFECTLY simple to turn into a post-sample, though if you were to do that, I'd remove the entire semi-auto disconnector and just use FA exclusively. With the sear, it'll be safe.
From what I've heard/seen recently, FS2000 did indeed have the sear removed because of how easy they were to convert.
PERFECTLY simple to turn into a post-sample, though if you were to do that, I'd remove the entire semi-auto disconnector and just use FA exclusively. With the sear, it'll be safe.
From what I've heard/seen recently, FS2000 did indeed have the sear removed because of how easy they were to convert.
RIP Dave. You will be missed.
Re: FN PS90
They did on the FS2000. They have just now started that process on the FS2000 and soon the same thing will happen to the PS90. FN is using the parts they have currently and once they run out of the "old" parts the new ones will replace them. These new ones will not have the front safety/full auto sear.mk23 wrote:I thought FN pulled the safety sear on both the PS90 and the FS2000.
I know for a fact they removed the front sear on the FS2000.
There are currently 4 generations of ps90 trigger packs
Gen 1 - All Black (or OD in color)
Gen 2 - Gray body, black hammer
Gen 3 - Gray body, gray hammer
Gen 4 - All Gray, these are the newest ones and supposedly they will not have the front safety sear
Re: FN PS90
The black hammer is the magic.
The grey hammer has a different cut for that front sear catch.
The grey hammer has a different cut for that front sear catch.
Re: FN PS90
That was my understanding as well something to do with the notch on the grey hammer being higher up that would prevent it from hitting with enough force to fire the round. I have never seen a pack with a grey hammer but that is how I understood it.okent wrote:The black hammer is the magic.
The grey hammer has a different cut for that front sear catch.
- generaldisarray
- Silent But Deadly
- Posts: 388
- Joined: Sat Dec 12, 2009 10:59 am
- Location: sho me state
Re: FN PS90
For a Postie
I would do it the way FN did it.
Mod the disconnector
Mod the safety selector
the fa position of the safety allows the trigger to move rearward further than for semi.
This cams the fa or modded disconnector out of position so it cannot catch the hammer.
I would do it the way FN did it.
Mod the disconnector
Mod the safety selector
the fa position of the safety allows the trigger to move rearward further than for semi.
This cams the fa or modded disconnector out of position so it cannot catch the hammer.
The truth is you're the weak. And I'm the tyranny of evil men. But I'm tryin, Ringo. I'm tryin' real hard to be the shepherd..... Jules Winnfield
Re: FN PS90
Kind of a PITA to work on that plastic, it looks very flimsy already.generaldisarray wrote:For a Postie
I would do it the way FN did it.
Mod the disconnector
Mod the safety selector
the fa position of the safety allows the trigger to move rearward further than for semi.
This cams the fa or modded disconnector out of position so it cannot catch the hammer.
RIP Dave. You will be missed.
Re: FN PS90
The easiest way is to make an autosear.
Extremely easy as long as you have the black hammer pack and completely reversible.
You could modify the safety selector but it's not necessary, but it would be cool.
Extremely easy as long as you have the black hammer pack and completely reversible.
You could modify the safety selector but it's not necessary, but it would be cool.