Hi new member building 6 suppressors** Updated for .308

Yes, it can be legal to make a silencer. For everything Form-1, from silencer designs that are easily made, to filing forms with the BATF, to 3D modeling. Remember, you must have an approved BATF Form-1 to make a silencer. All NFA laws apply.

Moderators: mpallett, bakerjw

zevdogs
Silent But Deadly
Posts: 240
Joined: Thu Jun 02, 2011 8:49 pm

Hi new member building 6 suppressors** Updated for .308

Post by zevdogs »

Hi this is a segment I've already posted other places but I want to become a member hear
It's taken a while to decide what I want to build but I've finally decided on 4 suppressors to build
I've been a machinist for 24 years and have access to a full CNC machine shop with some know how with Gibbs cam.

This is my list
1. One Idea I got from looking at the aac-m4 2000 for my AR
2. two versions of something that looks like the sparrow with improvements, 
one for my sig 22 and the 2nd for a custom build on my m&p15-22
3. A integral suppressor for my ruger 10/22

Each one will take me about a day so it should be pretty quick
Photos to come 
Last edited by zevdogs on Wed Aug 14, 2013 12:31 pm, edited 1 time in total.
zevdogs
Silent But Deadly
Posts: 240
Joined: Thu Jun 02, 2011 8:49 pm

Re: Hi new member building 4 suppressors

Post by zevdogs »

This is my first build on a smith & Wesson m&p 15-22
Image

And this is the core.. I have a sparrow but I dident want 16 inches of barrel plus 6 inches of suppressor plus I plan on useing hyper volicity ammo
I needed stainless and at the time sparrow dident come in stainless .... I also wanted a larger blast chamber
The center of the baffels have a larger devide wich I think helps out with the high volicity ammo

Image
Image

The YouTube link
http://www.youtube.com/watch?v=UKpfdf3b ... ata_player
User avatar
dj_fatstyles
Silent But Deadly
Posts: 445
Joined: Sat Nov 14, 2009 1:14 pm
Location: washington

Re: Hi new member building 4 suppressors

Post by dj_fatstyles »

very slick. looking forward to the other cans.
SWR Spectre
SWR H.E.M.S. 2
Gemtech SOS-45
Silencerco SS Sparrow
Gemtech Outback IID
jerrykn
New Member
Posts: 6
Joined: Tue Feb 10, 2009 10:27 am

Re: Hi new member building 4 suppressors

Post by jerrykn »

Beautiful work.
Looking forward to more, especially the AR

Thanks
for sharing
Jerry
zevdogs
Silent But Deadly
Posts: 240
Joined: Thu Jun 02, 2011 8:49 pm

Re: Hi new member building 4 suppressors

Post by zevdogs »

This is my suppressed AR-15

Image

And with out the suppressor I cut the barrel down to 16 and1/4 and made a titainum end concentric to the bore within .0005
The suppressor slides on the barrel with .0005 slip so even if it comes lose half way it will never give a baffel strike

Image
Image

When I was out testing my new suppressor I met a guy with a lightning link and he was very kind to let me test it with my new build
YouTube link

http://www.youtube.com/watch?v=nfV_Geim ... ata_player
Last edited by zevdogs on Fri Jun 03, 2011 9:15 am, edited 1 time in total.
zevdogs
Silent But Deadly
Posts: 240
Joined: Thu Jun 02, 2011 8:49 pm

Re: Hi new member building 4 suppressors

Post by zevdogs »

This is the baffles I went with they are heat treated 17-4 stainless
They are ground on the O.D to a .001 slip fit and just slide in a 316 stainless tube then both ends are welded
The bore on the baffels is .250 leaving .014 perside
For the .223 bullet


Image
Image
Image
Last edited by zevdogs on Tue Jun 07, 2011 11:34 am, edited 2 times in total.
bowhunterslodge
Member
Posts: 11
Joined: Sat May 14, 2011 8:28 pm

Re: Hi new member building 4 suppressors

Post by bowhunterslodge »

very nice work and great clip..
zevdogs
Silent But Deadly
Posts: 240
Joined: Thu Jun 02, 2011 8:49 pm

Re: Hi new member building 4 suppressors

Post by zevdogs »

Rugger 10/22

Just finished my intregal rugger 10/22, the hard part for me was cutting the wood stock out to fit the barrel

Image
Image

The barrel has been cut down to 8 inches and I have used a wire EDM to cut 60 degree slots into the barrel as a gas relief on the full leanth of the barrel to keep bullets subsonic 
 Then I've threaded the end for this type of suppressor to go on the barrel

Image

Then to make it as quite as possible I made a 2 inch tube at the end of the suppressor( but inside the large tube) and rolled up steal wool around a 1/4 bar .... Just to give a center for the bullet to pass
And that is at the end of the tube past the suppressor and sealed in side by a threaded end cap , it's like a steel wool  bullet wipe 
 I Plan on this one as a muskrat killer

YouTube http://www.youtube.com/watch?v=fk2Qfd7c ... ata_player
 
Last edited by zevdogs on Wed May 08, 2013 10:08 pm, edited 2 times in total.
zevdogs
Silent But Deadly
Posts: 240
Joined: Thu Jun 02, 2011 8:49 pm

Re: Hi new member building 4 suppressors

Post by zevdogs »

Sig 22

Ok just finished one made just for my sig 22
 The baffel design is a little differnt than my m&p but it still works very well
 I didn't have time to program the cnc so the baffels on this one was done free hand on a manual mill

Image

Image

Image

And the YouTube video
http://www.youtube.com/watch?v=jAGQTzgl ... ata_player
Tbone
Member
Posts: 42
Joined: Sat Sep 19, 2009 3:16 am
Location: Georgia

Re: Hi new member building 4 suppressors

Post by Tbone »

Awesome! Great looking work, and sounds good too.
User avatar
Wicked
Silent But Deadly
Posts: 1438
Joined: Fri Feb 20, 2009 1:15 am
Location: Dayton, OH
Contact:

Re: Hi new member building 4 suppressors

Post by Wicked »

zevdogs wrote:This is the baffels I went with they are heat treated 17-4 stainless
They are ground on the O.D to a .001 slip fit and just slide in a 316 stainless tube then both ends are welded
The bore on the baffels is .250 leaving .014 preside For the .223 bullet

Image
Very nice machine work.

Are the baffles cut only .014" per side over bore diameter all the way down the tube? That is super TIGHT!! Most muzzle brakes are bored .250" and they only extend an inch and a half from the end of the barrel. That small bore dimension should make for a very, very quiet suppressor. It doesn't leave much room for error though. Even if the machining is great and the tolerance stack-up is very small, any bullet instability could make trouble.

Will the rifle cycle without the can? How many rounds do you have down it? Wouldn't shoot cheap ammo through that baby. Ever used something like this from JBM to check the stability of the load being used? http://www.jbmballistics.com/cgi-bin/jbmstab-5.1.cgi
Should have a minimum stability factor of 1.5. Try different scenarios by decreasing velocity and/or temperature.
https://www.facebook.com/wickedweapons
BELT_FED
Silent Operator
Posts: 71
Joined: Sun Jan 02, 2011 5:19 pm

Re: Hi new member building 4 suppressors

Post by BELT_FED »

Is it just me or is the bolt on the 15/22 loud or what.. the first one I build sent me to town looking for a piece of rubber to get the bolt under control lol. I started with baffles close to your stepped cones on my 308 buildwith a aac "train whistle" blast baffle and wasn't happy with it. I went back and done modified omega baffles and kelp the blast baffle, now I'm very happy. It makes a friend gemtech look bad.. but reguardless you have done a great job very good looking machine work
zevdogs
Silent But Deadly
Posts: 240
Joined: Thu Jun 02, 2011 8:49 pm

Re: Hi new member building 4 suppressors

Post by zevdogs »

Reply to Wicked

My barrel has a 1/7 twist wich helps
The baffles are .014 clearance perside for all the baffles, ( that's the thickness of 4 peices of paper)
The O.D and I.D are machined at the same time that with the extended 1inch on the back keep everything in line
 I've got over 2000 rounds of Russian FMJ through it with the suppressor being taken on and off on full and semi with no problems
 I have had failure to eject a spent round without the suppressor but I don't know if that Is because it needed to be cleaned ... I don't plan on shooting unsuppressed so it's not a problem


Reply to belt_fed
I would like the m&p to cycle softly but it's almost the same as my rugger 10/22
 Thanks for the compliment
Last edited by zevdogs on Tue Jun 07, 2011 3:48 pm, edited 3 times in total.
User avatar
jimmym40a2
Elite Member
Posts: 2745
Joined: Sun May 06, 2007 8:25 pm
Location: Colorado (for Mongo)

Re: Hi new member building 4 suppressors

Post by jimmym40a2 »

Very nice work thanks for sharing.
http://www.youtube.com/watch?v=nEZJ_C4LwzA
User avatar
Schulze
Silent But Deadly
Posts: 997
Joined: Fri Mar 14, 2008 5:03 pm
Location: TEXAS

Re: Hi new member building 4 suppressors

Post by Schulze »

Great post! What made you decide on the ports in the stepped cone baffles?
zevdogs
Silent But Deadly
Posts: 240
Joined: Thu Jun 02, 2011 8:49 pm

Re: Hi new member building 4 suppressors

Post by zevdogs »

Schulze wrote:Great post! What made you decide on the ports in the stepped cone baffles?
I like the aac and I thought I could improve on it By not welding each one in place.
That's why mine have an extra inch on the back of the suppressor as to help keep the baffles centerd and in line

Image
Historian
Silent But Deadly
Posts: 3503
Joined: Mon Mar 29, 2010 10:37 pm

Re: Hi new member building 4 suppressors

Post by Historian »

Zevdogs, standing ovations for masterful machining.

What lathe did you use?

Great video.

Thanks.
User avatar
Capt. Link.
Silent But Deadly
Posts: 2829
Joined: Wed Oct 17, 2007 9:05 pm
Location: USA.

Re: Hi new member building 4 suppressors

Post by Capt. Link. »

The barrel has been cut down to 8 inches and I have used a wire EDM to cut 60 degree slots into the barrel as a gas relief on the full leanth of the barrel to keep bullets subsonic
Please more detail on this pic's? Porting with slots unique.
The only reason after 243 years the government now wants to disarm you is they intend to do something you would shoot them for!
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
zevdogs
Silent But Deadly
Posts: 240
Joined: Thu Jun 02, 2011 8:49 pm

Re: Hi new member building 4 suppressors

Post by zevdogs »

Historian wrote:Zevdogs, standing ovations for masterful machining.

What lathe did you use?

Great video.

Thanks.
Umm the lathe is just your standard engine lathe .. Thanks

The porting with slots on my 60 degree steped cones is just an idea from the AAC m4 photo
zevdogs
Silent But Deadly
Posts: 240
Joined: Thu Jun 02, 2011 8:49 pm

Re: Hi new member building 4 suppressors

Post by zevdogs »

My new colt 9mm
Cut barrel down to 10 inches pinned and welded suppressor on so no SBR
Image


My new version of a K-baffle all 7are 17-4 heat treated stainless steel

Image

Image

Image

And photos after being shot notice the burn pattern
Image

Image
Historian
Silent But Deadly
Posts: 3503
Joined: Mon Mar 29, 2010 10:37 pm

Re: Hi new member building 4 suppressors

Post by Historian »

Zevdogs, wonderful work, great presentation, inspiring.
Admire your skills. Ah to be that talented in metal.

Thanks.
Historian
Silent But Deadly
Posts: 3503
Joined: Mon Mar 29, 2010 10:37 pm

Re: Hi new member building 4 suppressors

Post by Historian »

Wicked wrote:
zevdogs wrote:This is the baffels I went with they are heat treated 17-4 stainless
They are ground on the O.D to a .001 slip fit and just slide in a 316 stainless tube then both ends are welded
The bore on the baffels is .250 leaving .014 preside For the .223 bullet

Image
Very nice machine work.

Are the baffles cut only .014" per side over bore diameter all the way down the tube? That is super TIGHT!! Most muzzle brakes are bored .250" and they only extend an inch and a half from the end of the barrel. That small bore dimension should make for a very, very quiet suppressor. It doesn't leave much room for error though. Even if the machining is great and the tolerance stack-up is very small, any bullet instability could make trouble.

Will the rifle cycle without the can? How many rounds do you have down it? Wouldn't shoot cheap ammo through that baby. Ever used something like this from JBM to check the stability of the load being used? http://www.jbmballistics.com/cgi-bin/jbmstab-5.1.cgi
Should have a minimum stability factor of 1.5. Try different scenarios by decreasing velocity and/or temperature.
Wicked, I plugged in the factors for a 1:8 twist Bully Barrel and got .214. Is this good or bad?
Not sure of direction of merit.
Thanks.
zevdogs
Silent But Deadly
Posts: 240
Joined: Thu Jun 02, 2011 8:49 pm

Re: Hi new member building 4 suppressors

Post by zevdogs »

Just added a YouTube video of my integral 10/22

http://www.youtube.com/watch?v=fk2Qfd7c ... ata_player
User avatar
jimmym40a2
Elite Member
Posts: 2745
Joined: Sun May 06, 2007 8:25 pm
Location: Colorado (for Mongo)

Re: Hi new member building 4 suppressors

Post by jimmym40a2 »

Beautiful.
http://www.youtube.com/watch?v=nEZJ_C4LwzA
User avatar
Shift1
Silent But Deadly
Posts: 556
Joined: Mon Feb 22, 2010 8:12 pm
Location: Lurking in the shadows of the Rocky Mountains

Re: Hi new member building 4 suppressors

Post by Shift1 »

Just a cryin shame the bolt is so loud!
"The Constitution shall never be construed to prevent the people of the United States who are peaceable citizens from keeping their own arms."- Samuel Adams
"LP"
Post Reply