Form 1 50bmg suppressor

Libertarian_Geek · Post by **Libertarian_Geek** » Sun Sep 19, 2010 7:31 pm

You could shoot other silencers through that silencer.

ffemt596 · Post by **ffemt596** » Tue Sep 28, 2010 12:32 pm

What is the thickness measurement of the baffles?

jimmym40a2 · Post by **jimmym40a2** » Tue Sep 28, 2010 2:38 pm

.15 on the baffles.
Got it all coated up and done.

check it out with sub sonics!
http://www.youtube.com/watch?v=vVCtGtxZyoQ

delta9mda · Post by **delta9mda** » Tue Sep 28, 2010 3:44 pm

jimmym40a2 wrote:.15 on the baffles.
Got it all coated up and done.

check it out with sub sonics!
http://www.youtube.com/watch?v=vVCtGtxZyoQ

what?! holy sheeeeeit. jimmy, im almost speachless. woooooooooooow. staple gun much? i mean, anyone reading this watch the vid!! like right now. it sounds like dry firing. ok im done now.

wolf · Post by **wolf** » Tue Sep 28, 2010 4:54 pm

Why was somebody disconnecting a air hose ,just as you did shoulder that riffle

ps why didnt you fire it

dj_fatstyles · Post by **dj_fatstyles** » Wed Sep 29, 2010 2:17 am

i saw the video but when you put in a round in the gun with the bullet in the casing, you didnt do anything and then ran the bolt and there was no bullet in the casing anymore. what kind of voodoo magik are you playing here?

wolf · Post by **wolf** » Wed Sep 29, 2010 12:36 pm

dj_fatstyles wrote:i saw the video but when you put in a round in the gun with the bullet in the casing, you didnt do anything and then ran the bolt and there was no bullet in the casing anymore. what kind of voodoo magik are you playing here?

Thats because he is reloading
and he is REALLY bad at it

you see , he did set the bullet too far out
then he could not quiet close the bolt because the bullet was hitting the lands
then opening the bolt again the bullet was sticking , he then pulled the bolt back and pulled the case out

normally you then have all the powder spilling in the gun messing up the action

but as said ,, he ist really bad at reloading , he even forgot to put powder in the case , thats why there is no powder all over the gun

dj_fatstyles · Post by **dj_fatstyles** » Thu Sep 30, 2010 1:30 am

wolf wrote:Thats because he is reloading
and he is REALLY bad at it

you see , he did set the bullet too far out
then he could not quiet close the bolt because the bullet was hitting the lands
then opening the bolt again the bullet was sticking , he then pulled the bolt back and pulled the case out

normally you then have all the powder spilling in the gun messing up the action

but as said ,, he ist really bad at reloading , he even forgot to put powder in the case , thats why there is no powder all over the gun

JacksonBrowne · Post by **JacksonBrowne** » Thu Sep 30, 2010 11:55 am

Wow. 690 grains of silent kick-ass.

Do you keep those cases separate from your other empties? Seems like you could use them for a good while longer.

GR2010 · Post by **GR2010** » Thu Sep 30, 2010 2:07 pm

If it's really heavy, how about removing material from the spacers to drop more weight and gain more volume ? You can just drill holes in them.

kogashuko · Post by **kogashuko** » Sat Oct 02, 2010 12:24 pm

Your post has me selling a CZ 308 kevlar to fund my 50 cal project. Looking at this I had a couple of questions.

Did you do anything to secure the baffels to the spacers other than drop them in and weld the end caps?

Also, do you shoot API rounds through it at all? I thought about shooting some of that but am affraid if I get a baffel stike (dont know if it would set it off) the 2oz of RDX in the thing would be more than enough to turn my can into a grenade being that close to it.

jimmym40a2 · Post by **jimmym40a2** » Sat Oct 02, 2010 7:39 pm

Did you do anything to secure the baffels to the spacers other than drop them in and weld the end caps

?
Nope

Also, do you shoot API rounds through it at all

A few APTI rounds no problem

delta9mda · Post by **delta9mda** » Sat Oct 02, 2010 11:38 pm

will there any be any corrosion issues with the aluminum touching the stainless? i thought this can be the case.

good job jimmy, i mean sick sick!!!!

NAM · Post by **NAM** » Mon Nov 22, 2010 5:06 pm

wowsers!

Jimmy_Jr · Post by **Jimmy_Jr** » Mon Nov 22, 2010 6:25 pm

How did I miss this thread? That's AWESOME!!!

WhisperFan · Post by **WhisperFan** » Thu Aug 11, 2011 5:15 am

Jimmy,

Would you care to share an update now that you have had this can for some time now?

How many rounds through it ....

How's everything holding up .....

Anything you would have done differently .....

That sort of thing

Thanks!

jimmym40a2 · Post by **jimmym40a2** » Thu Aug 11, 2011 10:20 am

Hey Wisper no problem. I have put hundreds of rounds thru it and there is not a glitch. It looks like there is not any erosion on the blast baffle. Welds and tube is fine.(I was a little concerned using the thin tubing) I'm really pleased with it. I wish it was a little lighter but it's huge so I guess that is what it is. Its the quietest 50 can I have ever heard.I have had allot of people shoot it and they cant believe how quiet it is. To my ear its as quiet as my trident with full power ammo. It makes 50 shooting allot of fun.

The only thing I would have done differently is thin out the baffles more so it would be lighter.(not the blast baffle)

st33ve0 · Post by **st33ve0** » Thu Aug 11, 2011 1:25 pm

WOW! Excellent job Jimmy! pm inbound.

tsands974 · Post by **tsands974** » Thu Aug 11, 2011 1:49 pm

Absolutely awesome, very impressive! Thanks for the pics and vids

dblas · Post by **dblas** » Mon Aug 22, 2011 6:02 pm

Pardon me while I go change my pants...

SRM · Post by **SRM** » Tue Aug 23, 2011 7:35 am

What does it meter?

anyone else see it in the backround?

doubloon · Post by **doubloon** » Tue Aug 23, 2011 7:39 am

Selectedmarksman wrote:If you built it to come apart the tube could double as a mortar.

Dang ... that might be another stamp.

jimmym40a2 · Post by **jimmym40a2** » Tue Aug 23, 2011 10:47 am

What does it meter?

anyone else see it in the backround?

Believe it or not under 130. 1m from muzzle per mill spec.

JohnnyO · Post by **JohnnyO** » Tue Aug 23, 2011 4:55 pm

I believe it.

SRM · Post by **SRM** » Tue Aug 23, 2011 9:19 pm

jimmym40a2 wrote:
What does it meter?

anyone else see it in the backround?
Believe it or not under 130. 1m from muzzle per mill spec.

Factory load?
Either way, my hat`s off!

Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor

Re: Form 1 50bmg suppressor