Suppressor Baffle Pics ONLY!
- Richard/SIA
- Silent But Deadly
- Posts: 368
- Joined: Tue Nov 25, 2008 3:51 am
- Location: Nevada
My step-cone 9mm baffles.
I put these up on another thread and was asked to post them here.
Here is my latest 9mm stepped cone baffle, used in an AR 9mm integral design.
Works very well, well enough that I have to be a bit possessive about it, and want to meter it.
I am not divulging exactly what I do in the ported expansion chamber area.
No fancy ports (Yet?) as I do not have a sound meter to determine if they would actually help or not.
I like simplicity, which this achieves.
Hoping it will also work well with 300 BLK.
I found that to be effective the "Steps" have to be reasonably wide, which limits their number.
I also concluded they work better with a slight compound angle and sharp edge.
The deep steps force the overall angle to 45º, 60º leaves the steps too shallow.
Using a 60º cone on the muzzle side, this leaves enough material for some other experiments.
In examining baffles after firing I note that the powder residue is very evenly distributed.
Other baffles such as simple M's have tended to remain almost clean near the orifice, with heavier deposits around the outside.
Hard anodized for durability and easy cleaning, I clean my baffles frequently in an effort to preserve them.
Here is my latest 9mm stepped cone baffle, used in an AR 9mm integral design.
Works very well, well enough that I have to be a bit possessive about it, and want to meter it.
I am not divulging exactly what I do in the ported expansion chamber area.
No fancy ports (Yet?) as I do not have a sound meter to determine if they would actually help or not.
I like simplicity, which this achieves.
Hoping it will also work well with 300 BLK.
I found that to be effective the "Steps" have to be reasonably wide, which limits their number.
I also concluded they work better with a slight compound angle and sharp edge.
The deep steps force the overall angle to 45º, 60º leaves the steps too shallow.
Using a 60º cone on the muzzle side, this leaves enough material for some other experiments.
In examining baffles after firing I note that the powder residue is very evenly distributed.
Other baffles such as simple M's have tended to remain almost clean near the orifice, with heavier deposits around the outside.
Hard anodized for durability and easy cleaning, I clean my baffles frequently in an effort to preserve them.
At these prices I want my gas 100 octane, leaded, and my windshield washed!
- Bendersquint
- Industry Professional
- Posts: 11357
- Joined: Sat Jan 07, 2006 7:19 pm
- Location: North Carolina
- Contact:
Re: Suppressor Baffle Pics ONLY!
Fixed the picture for you....emil wrote:Guys
I found this picture on the internet.
Do you know what this suppressor is ? I think it's AAC M4-2000 and AAC 762-SD
That is a AAC 416-SD and an AAC 762SD.
-B
Re: Suppressor Baffle Pics ONLY!
darn it, i made a boo-boo and will admit it. was looking at that scar and noticed the raised areas where the baffles are in the tube.
let me know if it needs to be removed.
nice catch B
let me know if it needs to be removed.
nice catch B
NP
-
- Silent But Deadly
- Posts: 240
- Joined: Fri Dec 18, 2009 1:07 pm
Re: Suppressor Baffle Pics ONLY!
40 monocore
Re: Suppressor Baffle Pics ONLY!
Is it M4?
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
Re: Suppressor Baffle Pics ONLY!
Head down products - HD22 with 6AL4V Titanium blast baffle.
1"odx5.3"long
1"odx5.3"long
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
Re: Suppressor Baffle Pics ONLY!
Another next step on the journey.
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
Re: Suppressor Baffle Pics ONLY!
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
Re: Suppressor Baffle Pics ONLY!
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
Re: Suppressor Baffle Pics ONLY!
Is this the Isis 9 ?
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
Re: Suppressor Baffle Pics ONLY!
Tactical Innovations Stratus 22lr.
Diameter: 1.0″
Length: 5.01″
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
Re: Suppressor Baffle Pics ONLY!
XTAR-9 baffle.
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
Re: Suppressor Baffle Pics ONLY!
.
.
Warlock II
.
Warlock II
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
Re: Suppressor Baffle Pics ONLY!
.
.
Spectre II
.
Spectre II
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
Re: Suppressor Baffle Pics ONLY!
.
.
new Octane9
1.375"x7.7" can
.
new Octane9
1.375"x7.7" can
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
- PaulNoiseLess
- Silent But Deadly
- Posts: 1249
- Joined: Sun Dec 06, 2009 10:02 am
- Location: Australia
- Contact:
Re: Suppressor Baffle Pics ONLY!
The future is not waiting for us, it is waiting within us ...
Re: Suppressor Baffle Pics ONLY!
Finn has only 3 patents to his name: 4,384,507; 4,588,043 & 4,590,698. The middle one is the only one that shows baffles and is the one that patented the 'M' and 'K' baffles.
[url=http://militarysignatures.com][img]http://militarysignatures.com/signatures/member1236.png[/img][/url]
-
- New Member
- Posts: 2
- Joined: Mon Feb 06, 2012 6:56 am
Re: Suppressor Baffle Pics ONLY!
Hey guys, I was wondering what these asymmetrical cutouts actually do, because it's kinda bothering me and my symmetry-OCD
Re: Suppressor Baffle Pics ONLY!
Look at the ones I've done after they wear shot and you can see the burn patternschili17 wrote:they direct the gasChielScape wrote:Hey guys, I was wondering what these asymmetrical cutouts actually do, because it's kinda bothering me and my symmetry-OCD
Brand new and un shot
-
- New Member
- Posts: 2
- Joined: Mon Feb 06, 2012 6:56 am
Re: Suppressor Baffle Pics ONLY!
Thanks guys
- twodollarbill
- Silent But Deadly
- Posts: 420
- Joined: Wed May 30, 2007 5:25 pm
- Location: wisconsin
Re: Suppressor Baffle Pics ONLY!
zevdogs wrote: Look at the ones I've done after they wear shot and you can see the burn patterns
Here is a pic I posted before.....after firing a few 22lr rounds when baffles are each rotated 180 degrees.
Evident by the residue, the blast strongly follows the cut of the mouse hole.