Block III SBR

aggiez28 · Post by **aggiez28** » Wed Jul 27, 2011 4:26 pm

KevinB wrote:As I keep mentioning, Block III will only happen if we sell the rest of the Block II's - about 30 left IIRC.

It took III and several of us a long time to get SBR approval, and if we can't move the II's, it will end.

if someone wants to buy all 30 could you cut them a good deal?

rob_s · Post by **rob_s** » Thu Jul 28, 2011 5:31 am

How compatible would a Block III (or a "costa") be with various cans on the market? Does the 11.5" barrel plus URX leave room to mount something like an AAC M4-2000 or similar?

new-arguy · Post by **new-arguy** » Thu Jul 28, 2011 6:15 am

I've built 11.5" barrel/mid URX uppers using KAC mounts, M4 2K mounts, and SF mounts. You have to shim the SF brake a little for it to work, but not much. GemTech Halo or G5 won't work.

rob_s · Post by **rob_s** » Thu Jul 28, 2011 6:29 am

I've seen pictures of a... pushed, for lack of a better term, SF mount that moves the attachment forward just slightly, but I'm not sure if that would be sufficient or not.

JasonM · Post by **JasonM** » Thu Jul 28, 2011 7:38 am

rob_s wrote:I've seen pictures of a... pushed, for lack of a better term, SF mount that moves the attachment forward just slightly, but I'm not sure if that would be sufficient or not.

Rob- it'll work with AAC, KAC and SF. Might need a few extra shims with a muzzle brake.

n.franklin · Post by **n.franklin** » Tue Sep 06, 2011 10:40 am

Any updates? As much as Id like to buy a Block II to help get the ball rolling on the block III's, Ive still got a Cabelas card and a Star card to pay down.

jbo723 · Post by **jbo723** » Sat Sep 10, 2011 11:01 pm

I did my part to get you guys closer the the Block III's and sent the form in on my Block II...I already have a "costa" build but, I would have loved to have used a E3 bolt and barrel..

66427vette · Post by **66427vette** » Sun Sep 11, 2011 2:00 am

I just wish the atf would approve my two block 2's form 3's . 5 weeks so far wtf!

Get-to-tha-choppa · Post by **Get-to-tha-choppa** » Sun Sep 11, 2011 7:27 am

My block II form 3 just cleared, It took eight weeks!

Gonna start the form 4 Monday.

Ryo · Post by **Ryo** » Sun Sep 11, 2011 8:07 am

Ouch.. for only a Form 3.

jbo723 · Post by **jbo723** » Sun Sep 11, 2011 9:03 am

Ryo wrote:Ouch.. for only a Form 3.

Yup..Seems like mine took almost 2 months to get to my dealer..

Get-to-tha-choppa · Post by **Get-to-tha-choppa** » Sun Sep 11, 2011 9:09 am

Ryo wrote:Ouch.. for only a Form 3.

Pretty outrageous eh! That is how it goes sometimes.

66427vette · Post by **66427vette** » Sun Sep 11, 2011 12:48 pm

Get-to-tha-choppa please check your pm's

Get-to-tha-choppa · Post by **Get-to-tha-choppa** » Sun Sep 11, 2011 3:03 pm

66427vette wrote:Get-to-tha-choppa please check your pm's

Just replied.

66427vette · Post by **66427vette** » Fri Sep 23, 2011 8:03 pm

My 2 block 2's showed up today !! Big thanks to everyone at lawmen's . Bad thing is I am stuck out of town until next week.

BriggsRi · Post by **BriggsRi** » Fri Sep 23, 2011 8:25 pm

66427vette wrote:My 2 block 2's showed up today !! Big thanks to every one at lawmen's . Bad thing is I am stuck out of town until next week.

Awesome

Just think, you should have them in 5 months and one week

jbo723 · Post by **jbo723** » Mon Oct 03, 2011 7:37 pm

Finally got around to getting my special run LW URX installed since it looks like I won't be ab;e to get in on the last XMas cheer item since I wasn't an OG (even though I have every single item offered)..It's on my SR15 registered lower for now but, I will more than likely use my Block II lower once the stamp comes in cause it actually says KAC SBR on it. It will be my Block 3.5 version..

WillyB70 · Post by **WillyB70** » Sun Nov 20, 2011 2:39 pm

Do we have any idea how many more block II's need to be sold before we can order the block III?

Army Chief · Post by **Army Chief** » Mon Nov 21, 2011 12:38 pm

WillyB70 wrote:Do we have any idea how many more block II's need to be sold before we can order the block III?

I believe the only safe answer is "all of them."

Block IIs exist. Block IIIs do not -- and will not, so long as there are Block IIs in stock.

AC

KevinB · Post by **KevinB** » Mon Nov 21, 2011 1:26 pm

Stand By for announcement on this

WillyB70 · Post by **WillyB70** » Mon Nov 21, 2011 2:08 pm

KevinB wrote:Stand By for announcement on this

Kevin

All I can say is you ain't right sir!!!!!

HKocher · Post by **HKocher** » Tue Nov 22, 2011 11:24 am

My Block II is on the way to my dealer. Interested to see the final specs on the Block III though.

66427vette · Post by **66427vette** » Tue Nov 22, 2011 1:09 pm

KevinB wrote:Stand By for announcement on this

upper only ?

heard a rumor when I was at Knob Creek.

MichaelVain · Post by **MichaelVain** » Tue Nov 22, 2011 4:05 pm

I would be happy for just uppers as well as complete rifles.

I bought 2 Block 1's to help the process out

HKocher · Post by **HKocher** » Tue Nov 22, 2011 7:01 pm

MichaelVain wrote:I would be happy for just uppers as well as complete rifles.

Me too. I probably can't justify buying another complete rifle, but I'd definately be interested in a Block III upper.

Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR

Re: Block III SBR