Honeybadger??? Um... can we get some (good) pics of this?

[kwin201]

What happened to this? I dont see any shot show videos about it

[delta9mda]

read the thread. someplace in there is says probably not for two years. build your own 300blk ar with a 9" bbl and be done.

[sardo67]

i'm interested in the suppressor design, i'd like to built one like this but i've herd that there are 2 parts to the can that the ATF considers to each be a can, that true?

[JasonM]

i'm interested in the suppressor design, i'd like to built one like this but i've herd that there are 2 parts to the can that the ATF considers to each be a can, that true?

Yes, mostly.

But you could easily build one like it with a 6.5" barrel, pistol gas and only the muzzle mount can.

[Baffle Stack]

sorry, but am I the only one who thinks its ugly as sin??

I'm with you. Not only is it spastic looking, it looks proprietary to the point of loosing modularity. Will the receivers mate up with standard ARs? If not that would be a deathkiss.

[JasonM]

[quote="Baffle Stack"Will the receivers mate up with standard ARs?[/quote]

Yes

[Baffle Stack]

Cool. I hope you guys do well with it. Most people seem to really like it.

[Ryo]

read the thread. someplace in there is says probably not for two years. build your own 300blk ar with a 9" bbl and be done.

2 years.. awww.. just awww..

[stevejobs]

2 years? The world is going to end in less then 1...

[diablito]

doubt this will ever see the light of day for the masses. not in the bean-counting stars. hopefully im wrong

[sardo67]

i'm interested in the suppressor design, i'd like to built one like this but i've herd that there are 2 parts to the can that the ATF considers to each be a can, that true?

Yes, mostly.

But you could easily build one like it with a 6.5" barrel, pistol gas and only the muzzle mount can.

i was thinking about doing something with a 7/8in barrel but with a long ported flash hider as the mount that would act like a ported barrel on the 10/22 integral you guys are working on now. so over all length of the "barrel" would be like 12 and have a 4+/- inch expansion chamber built into the can..... good idea or similar to the can you guys are testing?