My WWII MKII

General silencer discussion. If you want to talk about a specific silenced rifle or pistol, it is best to do that in the rifle or pistol section for that brand.

All NFA laws apply.

Moderators: mpallett, mr fixit, bakerjw, renegade

Post Reply
User avatar
Emilio
Silent But Deadly
Posts: 2339
Joined: Thu Apr 07, 2011 9:38 pm

My WWII MKII

Post by Emilio »

:lol:

Image

Image
Member of the LSU, SWR, and RUGGED underground. Shame Silencerco!
Top
woodstove
Silent Operator
Posts: 83
Joined: Fri Oct 24, 2008 6:46 am

Re: My WWII MKII

Post by woodstove »

Please pardon my ignorance Emilio
What is the other piece with the 550 cord on it? Is it a plate that fitts under the grips and allows a retention lanyard to be attached ?
If at first you don't succeed, RELOAD!!
Top
User avatar
rogerme
Silent But Deadly
Posts: 1645
Joined: Thu Dec 29, 2011 6:43 pm

Re: My WWII MKII

Post by rogerme »

woodstove wrote:What is the other piece with the 550 cord on it?
It is a bullet removal tool for after you take out the bg..
"If you carry a gun, people call you paranoid. That's ridiculous. If I have a gun, what in the hell do I have to be paranoid about?"

Clint Smith
Top
User avatar
Emilio
Silent But Deadly
Posts: 2339
Joined: Thu Apr 07, 2011 9:38 pm

Re: My WWII MKII

Post by Emilio »

It a Japanese knife. :mrgreen: Maybe should have used GI Bayonet for the pic . :D
Member of the LSU, SWR, and RUGGED underground. Shame Silencerco!
Top
jaredr
Silent But Deadly
Posts: 594
Joined: Wed Oct 01, 2008 9:14 pm

Re: My WWII MKII

Post by jaredr »

picture shows what appears to be a slot machined into the side of the suppressor, is that correct?
Top
User avatar
GoJohnnyGo
Silent But Deadly
Posts: 345
Joined: Wed Jul 15, 2009 8:19 pm

Re: My WWII MKII

Post by GoJohnnyGo »

No, he just blacked out the serial number with paint.
Top
jaredr
Silent But Deadly
Posts: 594
Joined: Wed Oct 01, 2008 9:14 pm

Re: My WWII MKII

Post by jaredr »

GoJohnnyGo wrote:No, he just blacked out the serial number with paint.
:lol: :lol: :lol: thx
Top
woodstove
Silent Operator
Posts: 83
Joined: Fri Oct 24, 2008 6:46 am

Re: My WWII MKII

Post by woodstove »

It a Japanese knife.


Thanks Emilio. I have never seen a lanyard for the MkIIs, only para cord and 100 mile an hour tape rigs
If at first you don't succeed, RELOAD!!
Top
GTFord1
Senior Silent Operator
Posts: 140
Joined: Sat Dec 25, 2010 7:42 pm

Re: My WWII MKII

Post by GTFord1 »

jaredr wrote:picture shows what appears to be a slot machined into the side of the suppressor, is that correct?
You stick a dime in for moderate suppression, but when you really need to be quiet, you shoehorn a quarter in there.
Top
User avatar
strobro32
Silent But Deadly
Posts: 1374
Joined: Fri Apr 04, 2008 7:18 pm

Re: My WWII MKII

Post by strobro32 »

Emilio,

I promised pics when I finished mine. A Buck Rogers Tactical. I just finished re-finishing it.

SS MKIII Standard profile
3.5" barrel
Spectre II/ Sparrow thread specs
Media blasted matte finish
V- speed eject
V- trigger and sear
FCG modified back to MKII specs
Fixed rear sight modified to low profile
Front sight removed and Hi-Viz sight added
Texture removed from blk grips and finished matte

Image
If it doesn't splatter, shatter, burst or explode, it's not worth shooting.
Top
66427vette
Silent But Deadly
Posts: 1873
Joined: Tue Apr 14, 2009 2:14 pm

Re: My WWII MKII

Post by 66427vette »

What media, grit , psi did you use? Thanks!
Top
User avatar
strobro32
Silent But Deadly
Posts: 1374
Joined: Fri Apr 04, 2008 7:18 pm

Re: My WWII MKII

Post by strobro32 »

Starblast medium, 80 psi

BTW, This was completely disassembled, masked and finished. If you do this, putting the mainspring housing (plunger, spring, ball bearing, lever) together again was a PAIN IN THE ASS! :)
If it doesn't splatter, shatter, burst or explode, it's not worth shooting.
Top
piglatinhater
Senior Silent Operator
Posts: 116
Joined: Fri Apr 22, 2011 1:47 pm

Re: My WWII MKII

Post by piglatinhater »

Noice!
Top
User avatar
Emilio
Silent But Deadly
Posts: 2339
Joined: Thu Apr 07, 2011 9:38 pm

Re: My WWII MKII

Post by Emilio »

strobro32 wrote:Emilio,

I promised pics when I finished mine. A Buck Rogers Tactical. I just finished re-finishing it.

SS MKIII Standard profile
3.5" barrel
Spectre II/ Sparrow thread specs
Media blasted matte finish
V- speed eject
V- trigger and sear
FCG modified back to MKII specs
Fixed rear sight modified to low profile
Front sight removed and Hi-Viz sight added
Texture removed from blk grips and finished matte
Sweet! Nice job, look good with the SpecreII. :P
Member of the LSU, SWR, and RUGGED underground. Shame Silencerco!
Top
Post Reply

Return to “Silencer Talk”