Does anyone know where to find any fiocchi 158g or new emcon 9mm subsonic ammo?
Or even decent 147g ammo? I can't find any anywhere.
9mm subsonic ammo
Moderators: mpallett, mr fixit, bakerjw, renegade
Re: 9mm subsonic ammo
The newest sportsmans guide flyer has Sellier &Bellot 124gr that says 1080 fps....
Might be worth looking at.......
Might be worth looking at.......
Re: 9mm subsonic ammo
I'd worry about that cycling the pistol...
-
- Senior Silent Operator
- Posts: 123
- Joined: Thu Jul 19, 2012 9:34 am
- Location: South Carolina
Re: 9mm subsonic ammo
I don't see a 124gr subsonic on their site....muzzle velocity of their 9mm Luger ammo was in the ballpark of 1150fps on their website (although it's listed in M/S, it's easily converted).
I have a 124gr subsonic handload that does just fine...no cycling issues. I don't see any reason why that Sellier & Bellot load wouldn't work just fine. I had a box of their subsonic load that was decent. Not as quiet as Fiocchi but works in a pinch.
I have a 124gr subsonic handload that does just fine...no cycling issues. I don't see any reason why that Sellier & Bellot load wouldn't work just fine. I had a box of their subsonic load that was decent. Not as quiet as Fiocchi but works in a pinch.
Re: 9mm subsonic ammo
Check out sgammo. I ordered some Winchester Bonded 147 grain($225 shipped for 500) yesterday and some 357 mag last week.
Re: 9mm subsonic ammo
I have not been able to find Fiocchi 158 gr. either. Hope someone has some input.
Re: 9mm subsonic ammo
Can you post your load data? powder, OAL, primer...Broken11B wrote: I have a 124gr subsonic handload that does just fine...no cycling issues. I don't see any reason why that Sellier & Bellot load wouldn't work just fine. I had a box of their subsonic load that was decent. Not as quiet as Fiocchi but works in a pinch.
-
- Senior Silent Operator
- Posts: 123
- Joined: Thu Jul 19, 2012 9:34 am
- Location: South Carolina
Re: 9mm subsonic ammo
124gr Hornady FMJ 9mm
3.6gr - 3.8gr Titegroup (Lyman's 48th Manual says 3.8 is also subsonic if 3.6 isn't quite enough for whatever your host is, but I'd start at 3.6)
CCI #500 Small Pistol Primer
OAL 1.125"
I have 2 147gr hand loads, one for FMJ (Hornady, etc) and one for plated (Berry's, Rainier, etc)
147gr FMJ
3.4gr Titegroup
CCI #500 Small Pistol Primer
OAL 1.135"
147gr Flat Nose Plated
3.2gr Titegroup
CCI #500 Small Pistol Primer
OAL 1.150"
3.6gr - 3.8gr Titegroup (Lyman's 48th Manual says 3.8 is also subsonic if 3.6 isn't quite enough for whatever your host is, but I'd start at 3.6)
CCI #500 Small Pistol Primer
OAL 1.125"
I have 2 147gr hand loads, one for FMJ (Hornady, etc) and one for plated (Berry's, Rainier, etc)
147gr FMJ
3.4gr Titegroup
CCI #500 Small Pistol Primer
OAL 1.135"
147gr Flat Nose Plated
3.2gr Titegroup
CCI #500 Small Pistol Primer
OAL 1.150"
-
- Senior Silent Operator
- Posts: 149
- Joined: Sat Dec 11, 2010 3:49 pm
Re: 9mm subsonic ammo
Tag
Broken11B wrote:124gr Hornady FMJ 9mm
3.6gr - 3.8gr Titegroup (Lyman's 48th Manual says 3.8 is also subsonic if 3.6 isn't quite enough for whatever your host is, but I'd start at 3.6)
CCI #500 Small Pistol Primer
OAL 1.125"
I have 2 147gr hand loads, one for FMJ (Hornady, etc) and one for plated (Berry's, Rainier, etc)
147gr FMJ
3.4gr Titegroup
CCI #500 Small Pistol Primer
OAL 1.135"
147gr Flat Nose Plated
3.2gr Titegroup
CCI #500 Small Pistol Primer
OAL 1.150"