AR SBR in 9mm

Machineguns, assault rifles, subguns, SBRs, etc. Photos, questions, discussion. General talk.

Moderators: mpallett, bakerjw

Post Reply
User avatar
Bendersquint
Industry Professional
Posts: 11357
Joined: Sat Jan 07, 2006 7:19 pm
Location: North Carolina
Contact:
Contact Bendersquint

Re: AR SBR in 9mm

Post by Bendersquint »

Gagtoe wrote:I like my Spikes just due to the fact I don't have to mess with the bolt hold open lever. Two wrenches and I can run my .22 upper on it.
The Hahn doesn't screw with the BHO either.

Just drop in from the top and tighten 1 screw and forget about it.

Even works without tightening the scew. :?
Top
crazyelece
Senior Silent Operator
Posts: 125
Joined: Fri Jun 06, 2008 9:08 pm

Re: AR SBR in 9mm

Post by crazyelece »

Personally I like a 5" barrel. 9mm was designed as a pistol round and the added length does not give much more of an advatage to range. However it does adversely affect subsonic. And we are talking suppressed so subsonic is more important than an extra couple yds of range. And you can shoot a 5" barrel without a suppressor with an extended flash hider.

My rig without and with the suppressor
Image
Image
Top
Post Reply

Return to “NFA Weapons”