Suppressor’s Parts (Models) Miniatures
Suppressor’s Parts (Models) Miniatures
I have started a new tiny project: Suppressor’s Parts (Models) Miniatures. From actual working Cans, scale them down to 50%, tune up the models for 3D Printing and go On-Line. The Shop is now 12 Parts. If it performs OK, I’ll grow it up with more models. What you buy is what you get at Home (the Miniature, check out dimensions when buying). Any suggestions/request is welcome. Link to the Shop follows:
http://www.shapeways.com/shops/PaulNoiseLess
http://www.shapeways.com/shops/PaulNoiseLess
Re: Suppressor’s Parts (Models) Miniatures
[quote="pnl2012"]
What you buy is what you get at Home the Miniature,
Paul, what materials will you be using for printing and what machine?
Gunny
What you buy is what you get at Home the Miniature,
Paul, what materials will you be using for printing and what machine?
Gunny
Re: Suppressor’s Parts (Models) Miniatures
Shapeways is an on-line 3D Printing Service: You take care of the Models and the Shop and they take care of Manufacturing and Logistics. For Material, depending on Model, you can select the one you’d like among several options: Plastics, Alumide, Silver, Gold, Stainless Steel, … For some of them, you can also select Color.
Re: Suppressor’s Parts (Models) Miniatures
Hmm!
Could some enterprising BATF supervisor find a diminutive 'little person"
agent to knock at your door, flash his badge, his head at your belly button level, smiling
saying:
"Surprise! We never placed a minimum size on what constitutes suppressor parts dimensions.
And as has been shown by his Lordship, Sir Eric Holder, we can be as arbitrary and capricious
as we want when we whimsically nail your tiny puckered parts for the fun of it.
Oh, and being 'Noiseless' will be a welcome asset during the evening pajama parties
in Club Fed."
[ Imagine this situation captured by a Mad Comic cartoon. ]
Could some enterprising BATF supervisor find a diminutive 'little person"
agent to knock at your door, flash his badge, his head at your belly button level, smiling
saying:
"Surprise! We never placed a minimum size on what constitutes suppressor parts dimensions.
And as has been shown by his Lordship, Sir Eric Holder, we can be as arbitrary and capricious
as we want when we whimsically nail your tiny puckered parts for the fun of it.
Oh, and being 'Noiseless' will be a welcome asset during the evening pajama parties
in Club Fed."
[ Imagine this situation captured by a Mad Comic cartoon. ]
Re: Suppressor’s Parts (Models) Miniatures
You are probably right; I’ve been told they recently closed several Home Depot Stores for selling Suppressor Parts in the Plumbing section
Re: Suppressor’s Parts (Models) Miniatures
I've been told this is not legal and I'm surprised the person who told me had not chimed in on this yet.
NP
Re: Suppressor’s Parts (Models) Miniatures
What's the smallest commercially available projectile? .172?Historian wrote:...
"Surprise! We never placed a minimum size on what constitutes suppressor parts dimensions.
...
Or the 2 mm Kolibri?
http://www.youtube.com/watch?v=BDtd2jNIwAU MUSAFAR!
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
Re: Suppressor’s Parts (Models) Miniatures
I'd really be interested if large numbers could be equipped in 1/6 scale. I need to equip my army:
Thanks,
Vera
Thanks,
Vera
"There are no stupid questions, only stupid people". -MAJ MALFUNCTION
Re: Suppressor’s Parts (Models) Miniatures
I just added a new item: a K-Baffle Coffee Cup. To be printed in Ceramics (food safe and several colors).
http://www.shapeways.com/model/1079530/ ... Box-search
http://www.shapeways.com/model/1079530/ ... Box-search
Re: Suppressor’s Parts (Models) Miniatures
Paul,
Neat idea, but How will it hold coffee?
Seems the scoops are open and so is the bullet hole?
Gunny
Neat idea, but How will it hold coffee?
Seems the scoops are open and so is the bullet hole?
Gunny
Re: Suppressor’s Parts (Models) Miniatures
No, it’s fully sealed inside. I did make in a way that keeps the features visible. So, no holes at all; hot & quiet Coffee early in the Morning. Salt and Pepper dispensers are coming.
Re: Suppressor’s Parts (Models) Miniatures
Very interesting on the stainless steel stuff. It seems like it's actually stainless powder + glue, but advertised good to over 1,500 F. It looks like the glue is either supplemented or replaced with Bronze. It's also machinable.
Very interesting in general!
Very interesting in general!
Re: Suppressor’s Parts (Models) Miniatures
Salt & Pepper dispensers (shakers) are ready now: Stepped & Fluted Cones (both mouth ported). Don’t forget to order the Cap to hold the “grains”:
Salt: http://www.shapeways.com/model/1081549/ ... Box-search
Pepper: http://www.shapeways.com/model/1081535/ ... Box-search
Tomorrow I’ll be working (¿?) on a tray to hold both plus some more goodies. Guess about the shapes … Thanks for the feedbacks and suggestions !, it's working so i'll keep moving forward !
Salt: http://www.shapeways.com/model/1081549/ ... Box-search
Pepper: http://www.shapeways.com/model/1081535/ ... Box-search
Tomorrow I’ll be working (¿?) on a tray to hold both plus some more goodies. Guess about the shapes … Thanks for the feedbacks and suggestions !, it's working so i'll keep moving forward !
-
- Silent But Deadly
- Posts: 827
- Joined: Sun Dec 26, 2010 10:34 am
- Location: Panama City, Fl.
Re: Suppressor’s Parts (Models) Miniatures
Damn Lava, that outfit is quite fetching, Urban camo????
Re: Suppressor’s Parts (Models) Miniatures
Thanks! But no. Just a Spanish designer dress in purple, magenta, black and gray.driver6814 wrote:Damn Lava, that outfit is quite fetching, Urban camo????
Might do a photoshoot in multicam tho
"There are no stupid questions, only stupid people". -MAJ MALFUNCTION
Re: Suppressor’s Parts (Models) Miniatures
I think the baffle coffee cup is kickass.delta9mda wrote:Ahh I see now Paul is back with more crap.
Re: Suppressor’s Parts (Models) Miniatures
Now, a nice and featured Tray for the Salt and Pepper shakers (add the FH to hold toothpicks and half cores to hold ketchup and mustard sachets). Quite expensive: http://www.shapeways.com/model/1083742/ ... Box-search
Thinking on more goodies like cutaways in 1/2 or 3/4 cuts. Or 3D Puzzles, …
Thinking on more goodies like cutaways in 1/2 or 3/4 cuts. Or 3D Puzzles, …
Re: Suppressor’s Parts (Models) Miniatures
I have added 3 new Goodies to the Shop in the “Accessories Section”. All of them are 1:1 since they are not “controlled” Parts:
http://www.shapeways.com/shops/PaulNois ... sories&s=0
All of them ready to for a 1/2 – 28 Tap … printing in Pink/Red for AirGuns ?
http://www.shapeways.com/shops/PaulNois ... sories&s=0
All of them ready to for a 1/2 – 28 Tap … printing in Pink/Red for AirGuns ?
Re: Suppressor’s Parts (Models) Miniatures
Another Goody for the Shop: 12 positions (30 degree rotation each) adjustable Mag-na-Port type device to minimize Barrel lift when shooting. Collar and Base ready for 1 1/16 – 28 threading. 1/2- 28 Muzzle threading. For .3xx Calibers or smaller. Inner Brake shape is a Nozzle (courtesy of the 3D Printing capabilities). Here is the Link and a section view Pic:
http://www.shapeways.com/model/1098005/ ... Box-search
http://www.shapeways.com/model/1098016/ ... Box-search
http://www.shapeways.com/model/1098012/ ... Box-search
http://www.shapeways.com/model/1098005/ ... Box-search
http://www.shapeways.com/model/1098016/ ... Box-search
http://www.shapeways.com/model/1098012/ ... Box-search
Re: Suppressor’s Parts (Models) Miniatures
Another Goody for the Shop: A nice 6 x POI shift and Zero rotation Recoil Booster for 9 mm (or smaller Calibers). The Spring can be sourced from MSCDirect.Com (P# 00603852, link follows). All parts are ready for 1 5/16 – 28 and Muzzle threading is 1/8 – 28. Tolerances are in the range of 0.0025 inches (sidewalls).
Link to Spring: http://www.mscdirect.com/product/00603852
And some Pics:
Link to Spring: http://www.mscdirect.com/product/00603852
And some Pics:
Re: Suppressor’s Parts (Models) Miniatures
Some more Goodies. This time cheap ones for the “Hattery” Section: Suppressor Covers (set of two. Rubber cord 5/32 diameter not included), like for the Rifle Scopes. Don’t get it wet when “raining” or just stow it and be sure there are no Bugs or dust inside, clean it and keep it clean, keep you rear cap threads safe, .... There are nine (9) OD diameters with 0.0025 tolerances available: 1, 1.062, 1.25, 1.375, 1.38, 1.5, 1.85, 2.0 & 2.5. Links:
1 Inch OD: http://www.shapeways.com/model/1109182/ ... Box-search
1.062 inches OD: http://www.shapeways.com/model/1109164/ ... Box-search
1.25 inches OD: http://www.shapeways.com/model/1109151/ ... Box-search
1.375 inches OD: http://www.shapeways.com/model/1109140/ ... Box-search
1.380 inches OD: http://www.shapeways.com/model/1109127/ ... Box-search
1.5 inches OD: http://www.shapeways.com/model/1109107/ ... Box-search
1.850 inches OD: http://www.shapeways.com/model/1109004/ ... Box-search
2 inches OD: http://www.shapeways.com/model/1108971/ ... Box-search
2.5 inches OD: http://www.shapeways.com/model/1108960/ ... Box-search
Feel free to contact me at the Shop for Custom OD’s: No extra charge. Pic follows:
1 Inch OD: http://www.shapeways.com/model/1109182/ ... Box-search
1.062 inches OD: http://www.shapeways.com/model/1109164/ ... Box-search
1.25 inches OD: http://www.shapeways.com/model/1109151/ ... Box-search
1.375 inches OD: http://www.shapeways.com/model/1109140/ ... Box-search
1.380 inches OD: http://www.shapeways.com/model/1109127/ ... Box-search
1.5 inches OD: http://www.shapeways.com/model/1109107/ ... Box-search
1.850 inches OD: http://www.shapeways.com/model/1109004/ ... Box-search
2 inches OD: http://www.shapeways.com/model/1108971/ ... Box-search
2.5 inches OD: http://www.shapeways.com/model/1108960/ ... Box-search
Feel free to contact me at the Shop for Custom OD’s: No extra charge. Pic follows:
Re: Suppressor’s Parts (Models) Miniatures
To: Admin - silencertalk
From: Bill - Tactical Armz
Subject: Advertising rates
Please forward prices and CPM for "full thread" advertising - positioned in upper third of parent subject page. Full color, photo-heavy, minimal text pertinent to anything...
Thank you.
Bill
From: Bill - Tactical Armz
Subject: Advertising rates
Please forward prices and CPM for "full thread" advertising - positioned in upper third of parent subject page. Full color, photo-heavy, minimal text pertinent to anything...
Thank you.
Bill
________________________________________________________
TACTICAL ARMZ
07-FFL, 02-SOT
www.tacticalarmz.com
TACTICAL ARMZ
07-FFL, 02-SOT
www.tacticalarmz.com
Re: Suppressor’s Parts (Models) Miniatures
Working now in a Front Sight attachment for Suppressors: For those losing the Barrel front sight due to Can’s OD. Also working on full Suppressors Hard Cases and Clips to carry and stow with your Guns. Tones of Goodies for Suppressors coming soon !
Re: Suppressor’s Parts (Models) Miniatures
My first attempt to make a 3D Printable Puzzle out of a MonoCore. Got the Parts and looks OK but still need to work on some details. I’m also trying to figure out how to print the parts as cheap as possible in 1 or two plates maximum. 3D Models are not the issue but the different format conversion times. It looks nice and doable, anyway. This one is 45 parts with guides to make it easier to assemble. Little Vid follows, the 3D printing model is not ready yet:
http://youtu.be/_4lNsGQmRzM
http://youtu.be/_4lNsGQmRzM