Completed Christmas Cheer Builds

Company specific discussions and announcements.

Moderators: 3, KevinB

Post Reply
USMC0351
Silent But Deadly
Posts: 268
Joined: Wed Sep 05, 2007 1:37 pm

Completed Christmas Cheer Builds

Post by USMC0351 »

Does anyone have photos of their completed Christmas Cheer builds using all of the parts? I didn't find any since the last parts were received. Thanks.
User avatar
cal
Senior Silent Operator
Posts: 130
Joined: Sun Aug 29, 2010 12:24 am
Location: Arizona

Re: Completed Christmas Cheer Builds

Post by cal »

I just saw one in either the AR15 or M4carbine KAC picture threads......It was one of the 16" barrels though.
User avatar
mcmillanman5
Silent But Deadly
Posts: 799
Joined: Wed Dec 06, 2006 7:23 pm
Location: ID

Re: Completed Christmas Cheer Builds

Post by mcmillanman5 »

It's been a while since I have posted last. Here are a few builds completed using Christmas cheer parts. The top rifle is my brothers and the lower two are mine. His is a full X-mas gun, I completed the build on the center black one before the barrels and rails were released using a 12.5" Noveske barrel dimpled by Marvin and a URXII.

The tan gun was built using Noveske receivers, LWURX, and the KAC barrel. Hope you enjoy:

Image

Image

Image

Image

Image

Image

Image

Image
User avatar
cal
Senior Silent Operator
Posts: 130
Joined: Sun Aug 29, 2010 12:24 am
Location: Arizona

Re: Completed Christmas Cheer Builds

Post by cal »

You or your brother ever need to sell one of those LWURX uppers, let me know !!!!

Really nice builds !
Tom12.7
Silent But Deadly
Posts: 395
Joined: Tue Mar 29, 2011 3:59 pm

Re: Completed Christmas Cheer Builds

Post by Tom12.7 »

I love those 11.5" dimpled barrels with the hard chromed bolt!
USMC0351
Silent But Deadly
Posts: 268
Joined: Wed Sep 05, 2007 1:37 pm

Re: Completed Christmas Cheer Builds

Post by USMC0351 »

Thanks for the photos. I'm trying to figure out what I'm going to do with my build. I have all of the Christmas Cheer parts, but the long rail with the 11.5" barrel doesn't work for my 5.56mm suppressor/mount (AAC Omni). I hate to break up the set, but may use the rail on a different upper and buy a carbine rail for the 11.5" build. Time to get my paperwork sent off to SBR, though.
User avatar
rob_s
Silent But Deadly
Posts: 3461
Joined: Sat Feb 25, 2006 5:33 pm
Location: SE FL

Re: Completed Christmas Cheer Builds

Post by rob_s »

I haven't put mine together because frankly I don't want to SBR the lower. My trust name and city are kind of long and the engraving is going to be pretty massive. I really wish I had asked for the non-NFA barrel. Anyone that got the 16" xmas cheer barrel want to trade? Anyone with another 16" dimpled KAC barrel want to swap?

Come to think of it, I don't think I've seen one of the 16" barrels.

I also have accumulated other KAC parts for the gun such as trigger, T1 mount, T1 battery cap, ambi safety, and the KAC logo dust cover that Neil from Gun Gallery had made up. Oh, and a sopmod stock and a KAC FH. I had a triple tap but didn't want to put that on an SBR. had I gotten the 16" barrel I would have used the TT.
Last edited by rob_s on Sat Sep 07, 2013 7:47 am, edited 1 time in total.
WWW.TACTICALYELLOWVISOR.NET
User avatar
rob_s
Silent But Deadly
Posts: 3461
Joined: Sat Feb 25, 2006 5:33 pm
Location: SE FL

Re: Completed Christmas Cheer Builds

Post by rob_s »

Image



Image
WWW.TACTICALYELLOWVISOR.NET
User avatar
genofromreno
Member
Posts: 16
Joined: Mon Oct 19, 2009 1:19 pm
Location: Afghanistan

Re: Completed Christmas Cheer Builds

Post by genofromreno »

PM just sent to you Rob.

Geno
USMC0351
Silent But Deadly
Posts: 268
Joined: Wed Sep 05, 2007 1:37 pm

Re: Completed Christmas Cheer Builds

Post by USMC0351 »

I've been trying to figure out whether I can get my AAC Omni on this thing or not. I'm not sure if there is going to be enough clearance...wish I had a 12.5" or carbine rail.
Post Reply