MAC10 9mm thread adapter
Moderators: Kenny_SilencerCo, Andrew@Silencerco
-
- Member
- Posts: 44
- Joined: Sat Oct 13, 2012 10:35 am
- Location: Lincoln, NE
MAC10 9mm thread adapter
i was looking to get an Octane for my F/A MAC. any chance you guys making a thread adapter for the octanes?
- Andrew@Silencerco
- Silent But Deadly
- Posts: 180
- Joined: Mon Nov 12, 2012 6:37 pm
- Location: Utah
- Contact:
Re: MAC10 9mm thread adapter
We are planning a few mounts for the Octane HD including a MAC option. No timeline on them at this point.DirtyHandsRob wrote:i was looking to get an Octane for my F/A MAC. any chance you guys making a thread adapter for the octanes?
-
- Member
- Posts: 44
- Joined: Sat Oct 13, 2012 10:35 am
- Location: Lincoln, NE
Re: MAC10 9mm thread adapter
Andrew@Silencerco wrote:We are planning a few mounts for the Octane HD including a MAC option. No timeline on them at this point.DirtyHandsRob wrote:i was looking to get an Octane for my F/A MAC. any chance you guys making a thread adapter for the octanes?
hmm... awesome. need someone to do some testing on it? i'll help.
Re: MAC10 9mm thread adapter
A 1.75" x 6" coaxial high volume design with the Octane baffles and "MAC" style mount ?!....
Just so the awesome guys at SWR/SilencerCo know...and I'm sure they do, it will take more than making a MAC style mount. Without a larger diameter tube, the gas and blowback will be horrific on a high cyclic rate SMG. Stick those fantastic Octane baffles in a 1.75-2" x 6-7" diameter coaxial can with a forcing cone in front and you will have the BEST "MAC" style can out there.
BUT... if they do make a mount, it should have some variation of a locking mount. The biggest downfall for suppressing the "MAC" style guns is the large threads on the barrels.
Just so the awesome guys at SWR/SilencerCo know...and I'm sure they do, it will take more than making a MAC style mount. Without a larger diameter tube, the gas and blowback will be horrific on a high cyclic rate SMG. Stick those fantastic Octane baffles in a 1.75-2" x 6-7" diameter coaxial can with a forcing cone in front and you will have the BEST "MAC" style can out there.
BUT... if they do make a mount, it should have some variation of a locking mount. The biggest downfall for suppressing the "MAC" style guns is the large threads on the barrels.
If it doesn't splatter, shatter, burst or explode, it's not worth shooting.
Re: MAC10 9mm thread adapter
Hmmm. Sounds sort of like an updated version of the MK9. Definitely a cool idea.strobro32 wrote:Stick those fantastic Octane baffles in a 1.75-2" x 6-7" diameter coaxial can with a forcing cone in front and you will have the BEST "MAC" style can out there.
Or just skip the MAC threads (baffle strike waiting to happen), and turn a fine-pitch thread on the end of the barrel. Much better solution.strobro32 wrote:BUT... if they do make a mount, it should have some variation of a locking mount. The biggest downfall for suppressing the "MAC" style guns is the large threads on the barrels.
Re: MAC10 9mm thread adapter
I would love a 2"x7-8" Octane for my Mac.
Re: MAC10 9mm thread adapter
Is this happening SWR? I would pay for a serial number on a trust ahead of the changes.
If it doesn't splatter, shatter, burst or explode, it's not worth shooting.
- Andrew@Silencerco
- Silent But Deadly
- Posts: 180
- Joined: Mon Nov 12, 2012 6:37 pm
- Location: Utah
- Contact:
Re: MAC10 9mm thread adapter
We have nothing like this I am aware of in the pipeline.