Possible to have a 762-SD made with .260/6.5mm baffles?

[pneumagger]

I know you can use a .260rem/6.5CM on a regular 30cal suppressor with good results, but is it possible to order a 762-SD type suppressor custom made with 6.5mm baffles (and labelled for 6.5mm) to get the better performance of correct sized baffles?

I was just curious...

[66427vette]

Doubt it. To small of a market. 30 cal version will sound fine.

[ikickhippies]

AAC is not really set up to do custom work. You might check with someone like Stalking Rhino, I have heard that they take on custom work from time to time.

[RJT]

Is the M42K still available in 6.8mm? Don't know if it will handle .260/6.5C pressures though.

[1_ar_newbie]

Is the M42K still available in 6.8mm? Don't know if it will handle .260/6.5C pressures though.

We no longer offer the M42k in 6.8mm

sorry

[1_ar_newbie]

I know you can use a .260rem/6.5CM on a regular 30cal suppressor with good results, but is it possible to order a 762-SD type suppressor custom made with 6.5mm baffles (and labelled for 6.5mm) to get the better performance of correct sized baffles?

I was just curious...

Sorry, we no longer stock 6.8mm or 6.5mm baffles. So we have no way to do this.

If we did still have parts it would still be hard as our smallest run these days is 150 rifle silencers.

sorry

Mike