Hey Everybody,
So I am purchasing my first silencer and I am wondering if I could buy a can that could serve on my .223 AR, 45 1911, and 9mm Glock. I know that using a large bore silencer on a smaller caliber gun can cause the shot to be louder, but I have witnessed a comparison and could not tell the difference. Therefore I am wondering what silencer would best suit me.
I have been leaning towards getting an AAC can due to the 200$-off website promotion they have going on.
Any and all input would be greatly appreciated!
Which suppressor for .223, 45, and 9mm?
Moderators: mpallett, mr fixit, bakerjw, renegade
Re: Which suppressor for .223, 45, and 9mm?
The Liberty Mystic is the most versatile for a first silencer. It's the only take-apart pistol can that also handles full power 223 and 300 BLK (at slow rates of fire). However you cannot shoot 40 and 45.
Re: Which suppressor for .223, 45, and 9mm?
I imagine it's too much to ask of one single can, to be both .45acp, and .223 without major sacrifices on each caliber.
A .30 cal can would be a better option, as well as an independant .45acp can.
A .30 cal can would be a better option, as well as an independant .45acp can.
Kyle O.
Re: Which suppressor for .223, 45, and 9mm?
Yes , no perfect can for all. Get the Octane 45 and save up for a 308 can. 223 is loud anyway.
Member of the LSU, SWR, and RUGGED underground. Shame Silencerco!
- chrismartin
- Silencertalk Goon Squad
- Posts: 4226
- Joined: Sun Mar 12, 2006 7:18 pm
- Location: Tidewater, VA
Re: Which suppressor for .223, 45, and 9mm?
This is the correct answer.Emilio wrote:Yes , no perfect can for all. Get the Octane 45 and save up for a 308 can. 223 is loud anyway.
I'd also recommend getting a good 22lr silencer.
Re: Which suppressor for .223, 45, and 9mm?
In other countries where suppressor designs are not regulated someTom3809 wrote:Hey Everybody,
So I am purchasing my first silencer and I am wondering if I could buy a can that could serve on my .223 AR, 45 1911, and 9mm Glock. I know that using a large bore silencer on a smaller caliber gun can cause the shot to be louder, but I have witnessed a comparison and could not tell the difference. Therefore I am wondering what silencer would best suit me.
I have been leaning towards getting an AAC can due to the 200$-off website promotion they have going on.
Any and all input would be greatly appreciated!
very old failed obscure designs had 'iris' baffles ... for each calibre from .45 => .22.
in a .45 can to accomodate/substitute various baffle hole diameters.
Metaphor: << http://upload.wikimedia.org/wikipedia/c ... s-iris.jpg >>
"No size fits all"
-
- Member
- Posts: 28
- Joined: Fri Apr 18, 2014 8:40 am
- Location: Trenton, Georgia
- Contact:
Re: Which suppressor for .223, 45, and 9mm?
Our Miranda for the 45 and Mystic for the others...
Tim @ Liberty
Tim @ Liberty
Liberty Suppressors
"Maker of the world's greatest firearm suppressors."
www.libertycans.net
706-661-6911
"Maker of the world's greatest firearm suppressors."
www.libertycans.net
706-661-6911