Could an Octane 45 be sent in for 9mm baffles?

Company specific discussions and announcements.

Moderators: Kenny_SilencerCo, Andrew@Silencerco

Post Reply
DrDremel
Senior Silent Operator
Posts: 133
Joined: Mon Jan 02, 2006 6:10 pm
Location: Ortonville, MI

Could an Octane 45 be sent in for 9mm baffles?

Post by DrDremel »

Making it an extra quiet 9mm silencer?
Top
RJT
Silent But Deadly
Posts: 718
Joined: Wed Jul 31, 2013 3:42 pm
Location: SoTx

Re: Could an Octane 45 be sent in for 9mm baffles?

Post by RJT »

Nope, can't change bore diameter once caliber has been designated.
You keep using that word. I do not think it means what you think it means.
Top
rimshaker
Silent But Deadly
Posts: 1038
Joined: Mon Jul 23, 2012 10:15 am
Location: FL

Re: Could an Octane 45 be sent in for 9mm baffles?

Post by rimshaker »

Guessing that also applies to just swapping the endcaps?
Top
RJT
Silent But Deadly
Posts: 718
Joined: Wed Jul 31, 2013 3:42 pm
Location: SoTx

Re: Could an Octane 45 be sent in for 9mm baffles?

Post by RJT »

Apparently not. Saker 7.62 can be fitted with a 5.56 endcap. Must not be considered a silencer part, but baffles are another story.
You keep using that word. I do not think it means what you think it means.
Top
jt526
Silent But Deadly
Posts: 571
Joined: Wed May 07, 2008 8:56 pm
Location: Dallas, TX

Re: Could an Octane 45 be sent in for 9mm baffles?

Post by jt526 »

The endcap on the saker isn't really an endcap in the sense that it holds the baffles in, the endcap on the saker is just an accessory. I'm betting ATF would have a negative opinion of putting the 5.56 on the 7.62 though. But I also thought that sig brace thing would be shot down after what some yahoos are doing with it, sooooo...there's that.
Stupid, stupid NFA items.
Top
Post Reply

Return to “Silencerco / SWR”