I saw some reference to this on another thread.
I have a "Thumbler" brand rotary tumbler I use will stainless steel pins to clean my brass before reloading. I use the pins, Dawn dish soap, and Lemishine.
Do I understand the information I read correctly that this same cleaning method can be used to clean internal suppressor parts? Even aluminum? The three cans I would like to clean are a Warlock II, a Mystic, and a Cobra II. All can be taken apart and have some aluminum parts.
Do the parts need to be cleaned one at a time or can everything inside the tube be put into the Thumbler at one time. I'd think this would be a bad thing for the tube as it could remove the printing on the outside of the tube.
I also have a vibratory brass cleaner and a reasonable supply of corn cob and walnut media. The vibratory cleaner cannot be used with a liquid.
I'm always on the hunt for easier as long as the process doesn't mess something up.
Cleaning baffles with stainless steel pins???
Moderators: mpallett, mr fixit, bakerjw, renegade
- Fulliautomatix
- Silent But Deadly
- Posts: 253
- Joined: Sun Sep 18, 2011 7:46 pm
Re: Cleaning baffles with stainless steel pins???
Disclaimer: I have no hands on experience with this.
Every discussion I have read regarding SS media tumbling has said that it should not be used for aluminum parts due to it degrading the anodized layer.
Additionally, the general consensus for vibratory tumblers is that it is pretty much worthless for cleaning off carbon and/or lead residue from suppressor parts.
Every discussion I have read regarding SS media tumbling has said that it should not be used for aluminum parts due to it degrading the anodized layer.
Additionally, the general consensus for vibratory tumblers is that it is pretty much worthless for cleaning off carbon and/or lead residue from suppressor parts.
Speak softly, and carry a big stick.
- eastern_hunter
- Silent But Deadly
- Posts: 966
- Joined: Sat Nov 21, 2009 8:34 pm
- Location: Charleston, WV
Re: Cleaning baffles with stainless steel pins???
Only have experience with the Octanes and the HTA SS Guardian 22 LR cans Wet xleaning w pints in a Model B Thumbler tumbler works for those very well indeed!
Re: Cleaning baffles with stainless steel pins???
Truth, have both vibratory and a tumbler. Tumbler with steel pins is excellent on steel and brass.Fulliautomatix wrote:...
Additionally, the general consensus for vibratory tumblers is that it is pretty much worthless for cleaning off carbon and/or lead residue from suppressor parts.
Have not tried it on aluminum of any kind, would not use steel pins on anything with a coated finish unless you're trying to remove the coating.
http://www.youtube.com/watch?v=BDtd2jNIwAU MUSAFAR!
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
- Bendersquint
- Industry Professional
- Posts: 11357
- Joined: Sat Jan 07, 2006 7:19 pm
- Location: North Carolina
- Contact:
Re: Cleaning baffles with stainless steel pins???
If the material being tumbled is softer than the media damage will occur. In our experience SS pins damages anodizing.
I would not use SS pins on anything but steel, titanium or brass cases.
I would not use SS pins on anything but steel, titanium or brass cases.
Re: Cleaning baffles with stainless steel pins???
What I expected. Back to the nitrile gloves and scrubbing Brushes
Re: Cleaning baffles with stainless steel pins???
Some claim that SS pins are fine on aluminum, but other reliable sources have found dimensional changes on aluminum backed and threads after tumbling. On SS or Ti baffles, it appears safer.
[b]Quis custodiet ipsos custodes?[/b]