Front cap broke

Company specific discussions and announcements.

Moderators: Kenny_SilencerCo, Andrew@Silencerco

Post Reply
Javieru6
New Member
Posts: 3
Joined: Sun Aug 23, 2015 1:53 pm

Front cap broke

Post by Javieru6 »

I just picked up my warlock 2 Saturday and today Sunday I shot it for the first time on my sbr and it shot off the front cap which a piece is missing and chipped 2 of my last baffles. I'm using it through a 4.5 barrel through ccmg is there any warranty or something on the warlock or has anyone had any problems like this
66427vette
Silent But Deadly
Posts: 1873
Joined: Tue Apr 14, 2009 2:14 pm

Re: Front cap broke

Post by 66427vette »

pics?
Javieru6
New Member
Posts: 3
Joined: Sun Aug 23, 2015 1:53 pm

Re: Front cap broke

Post by Javieru6 »

66427vette wrote:pics?
sorry cant seem to find the option to put a picture.
66427vette
Silent But Deadly
Posts: 1873
Joined: Tue Apr 14, 2009 2:14 pm

Re: Front cap broke

Post by 66427vette »

Email them to [email protected]
Javieru6
New Member
Posts: 3
Joined: Sun Aug 23, 2015 1:53 pm

Re: Front cap broke

Post by Javieru6 »

66427vette wrote:Email them to [email protected]
I emailed you the pictures. Thanks. I also sent another picture of the spacing to the barrel to the end cap. The spacing looks good
User avatar
Jstam
Member
Posts: 13
Joined: Wed Dec 24, 2014 11:20 am
Contact:

Re: Front cap broke

Post by Jstam »

Javieru6,
The warlock is covered under a full lifetime warranty. If you will email [email protected] with the issue, your address, phone and the serial number off of your suppressor we can get you taken care of. It is, however, odd that it would have an issue so soon. It is possible that the threads on your barrel may be too long causing the suppressor to move past the O-rings. This can cause some concentricity issues.Please don't hesitate to contact us.

Best Regards,

Jacob Stam
Silencerco
Customer Service Manager
Jacob Stam
Customer Service Manager
Silencerco
[email protected]
User avatar
doubloon
Silent But Deadly
Posts: 11897
Joined: Wed Dec 31, 2008 11:02 pm
Location: Houston-ish

Re: Front cap broke

Post by doubloon »

Javieru6 wrote:
66427vette wrote:pics?
sorry cant seem to find the option to put a picture.
You have to upload pictures to something like imgur then put the link in a post like this

http://i.imgur.com/cpE02HA.jpg

or this

Code: Select all

[img]http://i.imgur.com/cpE02HA.jpg[/img]
http://www.youtube.com/watch?v=BDtd2jNIwAU MUSAFAR!
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
User avatar
mars
Senior Silent Operator
Posts: 146
Joined: Thu Jul 07, 2011 10:29 am

Re: Front cap broke

Post by mars »

Jstam wrote:Javieru6,
The warlock is covered under a full lifetime warranty. If you will email [email protected] with the issue, your address, phone and the serial number off of your suppressor we can get you taken care of. It is, however, odd that it would have an issue so soon. It is possible that the threads on your barrel may be too long causing the suppressor to move past the O-rings. This can cause some concentricity issues.Please don't hesitate to contact us.

Best Regards,

Jacob Stam
Silencerco
Customer Service Manager
And this is why i have 2 of their cans, and i'm eyeballing another. Top notch!
the POWPOW now goes powpow
Post Reply