DTA Nano help needed!

Company specific discussions and announcements.

Moderator: James DeGroat

Post Reply
User avatar
wishbone
Member
Posts: 12
Joined: Sun Feb 06, 2011 9:53 pm

DTA Nano help needed!

Post by wishbone »

I need some help getting this suppressor on my 938 or 238 firearms. There is no shoulder on the threaded barrels from sig and this suppressor threads all the way through without it's own shoulder. Does anyone have any recommendations on how to get this on a host? I'm open to additional gunsmith recommendations if anyone has any.

DeGroat I've tried leaving messages on your phone and emailing you for the past several months with no response. Are you still offering any support for this suppressor and/or gunsmithing services?
colimr
Member
Posts: 44
Joined: Tue Oct 14, 2014 3:17 pm

Re: DTA Nano help needed!

Post by colimr »

Do you have enough thread for a jam nut?
User avatar
wishbone
Member
Posts: 12
Joined: Sun Feb 06, 2011 9:53 pm

Re: DTA Nano help needed!

Post by wishbone »

colimr wrote:Do you have enough thread for a jam nut?
Well I'd say it's more or less standard threaded barrel length. So probably. I considered the gemtech 1/2 28 nut, but The back of the suppressor isn't exactly smooth and I'm concerned about bore concentricity. I've also seen the thread protector cut down suggestion that I would be open to, but again I'd want to see someone who could do that with some serious precision to make sure I don't blow up the suppressor.

I'd love to see how degroat usually fits these things because I'm not sure I can see a solution I'd consider good, but I'm certainly not a gunsmith.
User avatar
T-Rex
Silent But Deadly
Posts: 1865
Joined: Wed Oct 29, 2014 3:38 pm
Location: CT - The AntiConstitution State

Re: DTA Nano help needed!

Post by T-Rex »

What about having an adapter made that has a shoulder and registers against the muzzle?
Completed Builds www.silencertalk.com/forum/viewtopic.php?t=79895
Burst Calculator www.engineersedge.com/calculators/pipe_bust_calc.htm
Silencer Porn www.instagram.com/explore/tags/silencerporn/
User avatar
wishbone
Member
Posts: 12
Joined: Sun Feb 06, 2011 9:53 pm

Re: DTA Nano help needed!

Post by wishbone »

T-Rex wrote:What about having an adapter made that has a shoulder and registers against the muzzle?
Are you offering to make me one? =) I think this is what degroat does, but I haven't been able to location any good clear pictures of this can mounted.
User avatar
Artful
Silent But Deadly
Posts: 4392
Joined: Wed Aug 17, 2005 10:47 pm
Location: Phx,AZ
Contact:

Re: DTA Nano help needed!

Post by Artful »

"Trying to tax yourself into prosperity is like standing in a bucket and trying to pick yourself up by the handle." - Winston Churchill
Post Reply