SAKER 7.62 51T Mount Not Locking
Moderators: Kenny_SilencerCo, Andrew@Silencerco
- HAMMERHEAD2
- Silent Operator
- Posts: 50
- Joined: Tue Oct 30, 2007 5:49 am
- Location: Traveler but Texas is Home.
SAKER 7.62 51T Mount Not Locking
Has anyone had a SAKER 51T mount that does not lock? When the can is installed and the lock ring engaged the can will still unscrew with little resistance. You can hear the lock attempting to engage the teeth but never a positive lock up.
Re: SAKER 7.62 51T Mount Not Locking
Which 51T mount? Some are longer than others... When the can is fully spun on, does it cover the 51T on the mount?
- HAMMERHEAD2
- Silent Operator
- Posts: 50
- Joined: Tue Oct 30, 2007 5:49 am
- Location: Traveler but Texas is Home.
Re: SAKER 7.62 51T Mount Not Locking
Tried it on three different variations. Looking at the lock it is centered on the teeth but appears to only touch the teeth. I spoke with SilencerCo, should have new mount in hand this week.
- HAMMERHEAD2
- Silent Operator
- Posts: 50
- Joined: Tue Oct 30, 2007 5:49 am
- Location: Traveler but Texas is Home.
Re: SAKER 7.62 51T Mount Not Locking
New adapter locks up rock solid.
Re: SAKER 7.62 51T Mount Not Locking
mine is solid on both the muzzle brake and flash hiders (3 diff variants)