Found these pictures over on another board. Shows great detail of a German clone of the Mickey Finn/H&K 9mm silencer for the MP5 and P9s pistol. Looks like a copy of one of the baffles before they added the cone on the K baffle.
I searched the other posts to make sure no one else had already posted this, since I find it pretty interesting that US technology, which was actually classfied information in the 1980's is easily copied overseas.
http://i114.photobucket.com/albums/n278 ... mancan.jpg
http://i114.photobucket.com/albums/n278 ... cclone.jpg
Pics of German clone of Mickey Finn/H&K 9mm silencer
Moderators: mpallett, mr fixit, bakerjw, renegade
- TManchester
- Member
- Posts: 33
- Joined: Wed Jan 24, 2007 5:57 pm
- Location: SE Virginia USA
Want to buy some
Not us rules
www.egun.de/market/item.php?id=1367145
www.egun.de/market/item.php?id=1349234
They can have parts ,,Ewen a hole can as long as it has no hole in the rear for mounting it, then its only deko
Not us rules
www.egun.de/market/item.php?id=1367145
www.egun.de/market/item.php?id=1349234
They can have parts ,,Ewen a hole can as long as it has no hole in the rear for mounting it, then its only deko
- Frank Castle
- Silent Operator
- Posts: 79
- Joined: Sat May 13, 2006 8:56 pm
wolf wrote:Want to buy some
Not us rules
www.egun.de/market/item.php?id=1367145
www.egun.de/market/item.php?id=1349234
They can have parts ,,Ewen a hole can as long as it has no hole in the rear for mounting it, then its only deko
Translation: http://babelfish.altavista.com/translate.dyn
They offer on a diffuser with a fitting shim for mufflers of the Kal. 22 (..222 /.223). These construction units are offered as spare parts. The diffuser is manufactured from high-quality aluminum. Everyone was blackened by a special galvanic procedure, which hardens aluminum around a multiple. Annoying and ugly scratches or rougher damages belong thereby to the past whereby the life span is substantially extended. Thus the diffuser becomes practically everlastingly. This guarantees an enormously high quality at the low good deal price. By means of this diffuser the developing gases were maximally efficiently rerouted and diminished. The concept comes of to a co-operation different experienced Buechsenmacher; the execution was accomplished by specialists, who were trained and cared for by specialists in the area of the ballistics. This ensures a "1 co-operation long to 1" conversion of the product. This diffuser unites the best characteristics of different muffler models, which make these hand-made unique pieces from combining states singular. Note! With such a diffuser concerns it NOT substantial construction unit of a muffler. Technical data diffuser Color: completely black Outside Ø 27.65 mm Drillings Ø 7.0 mm Technical data shim Color: completely black 20mm lengthens Note! This is an absolutely legal article! Who is not been versed with the current guidelines of the weapon law, should please only the above red reference read before a "offence" eGun is on announced. Otherwise you contacted me directly! Looks at you also my other auctions! With further questions to auctions I ask gladly for email. I stand for you with good advice to the side. Here thus no complaint and cancelling concern possible a private auction. eGun take over I, postage and packing of the buyers. Much fun when offering.