Need Help Glock 17 and H&K USP 40 EVO 45 can

usmcknight69 · Post by **usmcknight69** » Sat Apr 18, 2015 1:44 pm

I need some help. I have an EVO 45 on my Kimber TLE II with a Barstow barrel. I purchased it almost 10 years ago and don't remember the thread pitch. I have a Glock 17 9mm and an H & K USP .40 that I would like to set up with the EVO 45. I need to know what I need to purchase to make it work....threaded barrel with what thread? spacer or adapter? new piston for the EVO 45? Any help is greatly appreciated!

Killerapplesauce · Post by **Killerapplesauce** » Sat Apr 18, 2015 5:09 pm

You will of course need threaded barrels and pistons for the different thread pitches on each barrel.

usmcknight69 · Post by **usmcknight69** » Sat Apr 18, 2015 8:09 pm

Ok. So is it as simple as just threaded barrels and pistons? I don't need any other spacer or adapter? And does it make a difference what thread pitch I get or is it just personal preference?

NickAAC · Post by **NickAAC** » Sun Apr 19, 2015 7:41 am

Unfortunately we do not make pistons for that silencer in any other thread pitches besides the common .45 thread pitches.

usmcknight69 · Post by **usmcknight69** » Sun Apr 19, 2015 12:43 pm

NickAAC wrote:Unfortunately we do not make pistons for that silencer in any other thread pitches besides the common .45 thread pitches.

Thank you Nick! So will I need a threaded barrel and adapter to use it, or am I just out of luck?

NickAAC · Post by **NickAAC** » Mon Apr 20, 2015 7:48 am

We do not recommend any thread adapters. I would not advise trying to use that silencer for anything other than .45 unfortunately.

Bendersquint · Post by **Bendersquint** » Mon Apr 20, 2015 9:40 am

We made a 9mm piston for the Evo45 a few years ago, and it cycles but it didn't sound very good at all. The baffle design isn't the greatest for the 45, for the 9mm its just plain terrible.

I would put that $$$ towards a new modern high performing can.

usmcknight69 · Post by **usmcknight69** » Mon Apr 20, 2015 9:32 pm

Roger that....thanks for the info....Final question...what would be the best can to get if I wanted to use it on a 9mm & .40? Or if I just want to stick with getting a quiet 9mm, what is the best one? I can live without putting a can on my .40.

Bendersquint · Post by **Bendersquint** » Mon Apr 20, 2015 10:03 pm

usmcknight69 wrote:Roger that....thanks for the info....Final question...what would be the best can to get if I wanted to use it on a 9mm & .40? Or if I just want to stick with getting a quiet 9mm, what is the best one? I can live without putting a can on my .40.

I would get a Silencerco Octane 45. Works great on 45, 40 and 9, user serviceable and SS, will never wear out!

usmcknight69 · Post by **usmcknight69** » Tue Apr 21, 2015 8:47 pm

Thanks Bender....I'll check it out!

Need Help Glock 17 and H&K USP 40 EVO 45 can

Need Help Glock 17 and H&K USP 40 EVO 45 can

Re: Need Help Glock 17 and H&K USP 40 EVO 45 can

Re: Need Help Glock 17 and H&K USP 40 EVO 45 can

Re: Need Help Glock 17 and H&K USP 40 EVO 45 can

Re: Need Help Glock 17 and H&K USP 40 EVO 45 can

Re: Need Help Glock 17 and H&K USP 40 EVO 45 can

Re: Need Help Glock 17 and H&K USP 40 EVO 45 can

Re: Need Help Glock 17 and H&K USP 40 EVO 45 can

Re: Need Help Glock 17 and H&K USP 40 EVO 45 can

Re: Need Help Glock 17 and H&K USP 40 EVO 45 can