Case For Serbu Super Shorty

[cardboardkiller]

I did some searching around on the net and a few forums and I'm not coming up with too many options for carrying my Serbu Super Shorty. What are you guys using other than a holster?

[flight954]

I've seen a guy on Gunbroker that makes a set up. You can always talk to Battlecloth, he may make something up for you.

[fstbk65]

I saw a thigh rig at Knob Creek a couple of years ago but I haven't any idea who made it. Sorry

It was cool though

[cardboardkiller]

I saw a thigh rig at Knob Creek a couple of years ago but I haven't any idea who made it. Sorry

It was cool though

Thanks, but I have no need for a holster.

[ATCDoktor]

Mine will fit inside one of those large green military tool bags (thats what I use). In fact, it'll fit in there while holstered.

I'll post a pic this afternoon (when I get off work) if you want.

[cardboardkiller]

Mine will fit inside one of those large green military tool bags (thats what I use). In fact, it'll fit in there while holstered.

I'll post a pic this afternoon (when I get off work) if you want.

Cool, thanks!

[ATCDoktor]

Here is what I carry my SHF KEG 12 in:



I keep mine holstered for transport as it provides an extra layer of finish protection betweeen it and all the other s--t I have in my bag.



The bag is large enough for the holstered KEG 12 and a walmart 100 pack of 12 gauge shells and has plenty of room to spare. I cram it so full of s--t at times its almost too heavy to carry.



Here it is all zipped up. What I like about it is that it doesn't look like something that someone would normally carry a gun in.

[Wicked]

I carry my Mossberg/Safety Harbor KEG12 in this: a Camelback M.U.L.E. in woodland camo.




I had mine mil surplus but they sell retail for like $65. I took out the hydration bladder and the short shotty JUST fits in the large main compartment. It will also take a broken down Cold Steel Spike tomahawk in there as well. The small upper pouch holds 45 shells in elastic cards. The lower pouch holds a Glock 19 in kydex holster, 3 spare mags, Surefire G3 LED light, a CRKT M16 folding knife and a very compact trauma kit.

It's the perfect 'lil bug-out bag. I've managed to fit a metric ton of firepower in that small pack. Yea, it's a bit heavy.

The only thing I would do differently would be to look for a more 'civilian' color so it blends in the urban environment better.

[GoingQuiet]

I did some searching around on the net and a few forums and I'm not coming up with too many options for carrying my Serbu Super Shorty. What are you guys using other than a holster?

Are you referring to carrying as in carrying or carrying as in transporting?

I'm working on a new line of custom cut cases.

Here's a sample of some of the stuff we've done, so you can see a Serbu SS shouldn't be a problem.

[Bendersquint]

I use a OD green soft case that I bought for the Thompson Center Contender pistol, it fits nicely, protects the Serbu and even has 2 pockets to hold shells and what-not.

Works perfectly for the MP5 as well.

Best $30 I spent!

-B

[cardboardkiller]

I did some searching around on the net and a few forums and I'm not coming up with too many options for carrying my Serbu Super Shorty. What are you guys using other than a holster?

Are you referring to carrying as in carrying or carrying as in transporting?

I'm working on a new line of custom cut cases.

Here's a sample of some of the stuff we've done, so you can see a Serbu SS shouldn't be a problem.

I'm looking for something for transport, but I'd rather not get into a case that cost half as much as the gun.

[cardboardkiller]

I use a OD green soft case that I bought for the Thompson Center Contender pistol, it fits nicely, protects the Serbu and even has 2 pockets to hold shells and what-not.

Works perfectly for the MP5 as well.

Best $30 I spent!

-B

I've looked at those, but I wasn't sure if it would fit. Thanks!

I've only been able to handle the gun for a bit, so I'm doing this kinda blind. I picked it up from the dealer on the way home from a month long job out of town and then I had to fly out the next morning. I'm stuck here in New Jersey for another week and a half or so.

[Bendersquint]

I will post a picture in the next day or so of it in the case and outside, for reference and if there are any markings on the case I will post that as well so you can find one if you go that route.

You will enjoy it for sure.

-B

[Shea]

I am in the same boat, looking for a case for the Serbu. I have the holster from SKT Industries coming. I was looking at the Maxpedition R19 just don't know if there is enough width? Ideas???

Thanks,
Shea

[Bendersquint]

I am in the same boat, looking for a case for the Serbu. I have the holster from SKT Industries coming. I was looking at the Maxpedition R19 just don't know if there is enough width? Ideas???

Thanks,
Shea

Totally forgot about this thread so here is a pic of the Serbu inside the Thompson Center case. Case also doubles as my MP5 case as it fits perfectly!

-B

[Shea]

Bendersquint,

Case looks nice, do you think a Maxpedition R19 would work? Looks long enough, just don't know about the width.

http://www.maxpedition.com/store/pc/R-1 ... L-p102.htm

Thanks,
Shea

[Bendersquint]

Bendersquint,

Case looks nice, do you think a Maxpedition R19 would work? Looks long enough, just don't know about the width.

http://www.maxpedition.com/store/pc/R-1 ... L-p102.htm

Thanks,
Shea

Way too long and its thin enough to see a clear outline of the Serbu contained within.

The T/C case was about 25 bucks if i recall right and has 2 outside pockets for shells, forms, car keys and of course the sling for the SSS.

-B

[NWGunLaw]

Guys, what is the manufacturer of the Serbu OD case shown here? Does not look like the current Thompson Contender case... so can anyone post a link for me to buy one?

Thanks much.

[jt526]

Looks a whole lot like this Allen case:

http://www.amazon.com/Allen-Company-Con ... B0013R8HSQ

[Bendersquint]

That looks alot like the case, it probably is.

The retailer I bought mine from had it marked with a T/C tag on it, selling it as a Contender/Encore case.

He happens to sell A LOT of Allen cases so I bet its the same, he must have marked it AS a T/C case.

[strobro32]

I like Banshee's case.

[J Krammes]

I like Banshee's case.

That is awesome... I would love a Serbu with a forend like that. I don't like the vert. grip. Does he do that, or is that a custom forend?

Jeremy

[Bendersquint]

I like Banshee's case.

That is awesome... I would love a Serbu with a forend like that. I don't like the vert. grip. Does he do that, or is that a custom forend?

Jeremy

Thats a custom forend and I don't believe its a Serbu either. Serbu doesn't put any sights on their AOW's.

[strobro32]

Banshee made the gun and the wood grip but as you can see it has a piece missing so I think he's made another by now.

[copenhagen]

I did some searching around on the net and a few forums and I'm not coming up with too many options for carrying my Serbu Super Shorty. What are you guys using other than a holster?

Haha, your glove box.