3,
I was wondering if you are still planning to make hand stops for the MD rail available to us. I'm totally in on getting one or two of them. I'm willing to beta test them as well.
Thanks.
MD Rail Hand Stop
Re: MD Rail Hand Stop
Was wondering the same thing. Saw them elsewhere and immediately wanted one to add to the Xmas Cheer rail.
WWW.TACTICALYELLOWVISOR.NET
Re: MD Rail Hand Stop
From what I heard, Casey said they were in the pipeline, and when they are finally available the Christmas cheer people would get first dibs. Of course, naturally, there are only going to be enough to supply the demand from the OG and few other random owners of that rail.
I too would love one, but for the time being i just mounted the MOE rail piece and the normal KAC handstop.
I too would love one, but for the time being i just mounted the MOE rail piece and the normal KAC handstop.
Gun Gallery Enthusiast-
Re: MD Rail Hand Stop
Are there any pics of the the Magpul handstop or is it just the KAC one reworked for the Magpul URX?
Freedom is not Free...
Re: MD Rail Hand Stop
I haven't seen one yet, not sure if one exists yet. I just heard about them possibly being made. It's suppose to work with the Magpul URX rail if I understood correctly. I hate to add a rail just to add a handstop.jbo723 wrote:Are there any pics of the the Magpul handstop or is it just the KAC one reworked for the Magpul URX?
- lawndartdesign
- Silent But Deadly
- Posts: 434
- Joined: Tue Feb 24, 2009 7:45 pm
- Location: Portland, Oregon
- Contact:
Re: MD Rail Hand Stop
They look like a standard handstop, just made out of Delrin, and attaches with a vertical screw. If I dig back through my photos I believe I have a photo of the one on the slick railed SR-25 from October's class.
Re: MD Rail Hand Stop
I saw pictures, I think on M4C, of someone with one on a .308 but I wouldn't know where to begin to look for them now.
WWW.TACTICALYELLOWVISOR.NET
- KevinB
- Silent But Deadly
- Posts: 1100
- Joined: Fri Feb 27, 2009 10:38 am
- Location: Northern VA
- Contact:
Re: MD Rail Hand Stop
Kevin S. Boland
Director of Military Operations
Knight's Armament Company
701 Columbia Blvd.
Titusville, Fl 32780
Ph 321-607-9956
Cell 407-451-4544
Fax 321-383-2143
http://www.knightarmco.com
Director of Military Operations
Knight's Armament Company
701 Columbia Blvd.
Titusville, Fl 32780
Ph 321-607-9956
Cell 407-451-4544
Fax 321-383-2143
http://www.knightarmco.com
Re: MD Rail Hand Stop
Awesome.
- Teufelhunden
- Silent But Deadly
- Posts: 207
- Joined: Thu Dec 03, 2009 8:32 pm
- Location: Florida
Re: MD Rail Hand Stop
CaseyKevinB wrote:
Need you to work your magic AGAIN!! When ever this EMC slick rail and Supertap become commercially available you have the Green-light on my end!!
The Marvelous MOD is lonely
Re: MD Rail Hand Stop
Okay that's awesome. Thanks for the photo.
-
- Senior Silent Operator
- Posts: 146
- Joined: Tue Feb 12, 2008 1:05 am
- Location: Miami Fl
Re: MD Rail Hand Stop
Why is there a sling stud on the back of the ACS on this rifle?
just curious
thanks
just curious
thanks
- KevinB
- Silent But Deadly
- Posts: 1100
- Joined: Fri Feb 27, 2009 10:38 am
- Location: Northern VA
- Contact:
Re: MD Rail Hand Stop
The Army is looking to move to the ACS stock on the M110 as part of the potential PIP.
It was the favorite of their user jury, however they needed a method to mount their current inservice sling, as well as a way to mount a monopod or tripod mount to the stock.
It was the favorite of their user jury, however they needed a method to mount their current inservice sling, as well as a way to mount a monopod or tripod mount to the stock.
Kevin S. Boland
Director of Military Operations
Knight's Armament Company
701 Columbia Blvd.
Titusville, Fl 32780
Ph 321-607-9956
Cell 407-451-4544
Fax 321-383-2143
http://www.knightarmco.com
Director of Military Operations
Knight's Armament Company
701 Columbia Blvd.
Titusville, Fl 32780
Ph 321-607-9956
Cell 407-451-4544
Fax 321-383-2143
http://www.knightarmco.com
-
- Senior Silent Operator
- Posts: 146
- Joined: Tue Feb 12, 2008 1:05 am
- Location: Miami Fl
Re: MD Rail Hand Stop
So Kev how can I mount a mono pod on my acs for my sr25em??
Thanks
Thanks
- KevinB
- Silent But Deadly
- Posts: 1100
- Joined: Fri Feb 27, 2009 10:38 am
- Location: Northern VA
- Contact:
Re: MD Rail Hand Stop
We tapped the ACS plates for our sling swivel stud.
Kevin S. Boland
Director of Military Operations
Knight's Armament Company
701 Columbia Blvd.
Titusville, Fl 32780
Ph 321-607-9956
Cell 407-451-4544
Fax 321-383-2143
http://www.knightarmco.com
Director of Military Operations
Knight's Armament Company
701 Columbia Blvd.
Titusville, Fl 32780
Ph 321-607-9956
Cell 407-451-4544
Fax 321-383-2143
http://www.knightarmco.com
-
- Senior Silent Operator
- Posts: 146
- Joined: Tue Feb 12, 2008 1:05 am
- Location: Miami Fl
Re: MD Rail Hand Stop
is it difficult or hard can I send you and email ?
[email protected]
ill email you to see if i can get some instructions
thanks
[email protected]
ill email you to see if i can get some instructions
thanks
Re: MD Rail Hand Stop
Kevin, how much does that rifle weigh, minus the scope, mag and swivels?
-Toyz
-Toyz
I'll keep my guns and money.....You can keep the "change".
Re: MD Rail Hand Stop
Could that be a new Super Tap?
I'll keep my guns and money.....You can keep the "change".
Re: MD Rail Hand Stop
So is this the official version of the military M110 carbine? That thing is badass!
KevinB wrote:
- KevinB
- Silent But Deadly
- Posts: 1100
- Joined: Fri Feb 27, 2009 10:38 am
- Location: Northern VA
- Contact:
Re: MD Rail Hand Stop
It was one of the inconel Super Tap's we produced, we found that with actual shooter the Super Tap did not perform like it did in recoil testing, so it that program was cancelled.
Kevin S. Boland
Director of Military Operations
Knight's Armament Company
701 Columbia Blvd.
Titusville, Fl 32780
Ph 321-607-9956
Cell 407-451-4544
Fax 321-383-2143
http://www.knightarmco.com
Director of Military Operations
Knight's Armament Company
701 Columbia Blvd.
Titusville, Fl 32780
Ph 321-607-9956
Cell 407-451-4544
Fax 321-383-2143
http://www.knightarmco.com
Re: MD Rail Hand Stop
KevinB wrote:
Hey Kevin,
I just shot you an email regarding this rifle and the EMC lower we had been talking about.
Re: MD Rail Hand Stop
BTW any word on if these handstops are going to be produced?
-
- New Member
- Posts: 1
- Joined: Sat Aug 14, 2010 1:32 pm
- Location: London, UK
Re: MD Rail Hand Stop
Gear Sector has some really neat hand stops. Looking at getting one soon. I'm not sure about the LaRue ones though. There doesn't seem to be any screw holding them in place. I wonder if they'll stay in place.
Re: MD Rail Hand Stop
What we're looking for is the hand stop that KAC designed just for these rail-less FF tubes.chrisaryee wrote:Gear Sector has some really neat hand stops. Looking at getting one soon. I'm not sure about the LaRue ones though. There doesn't seem to be any screw holding them in place. I wonder if they'll stay in place.
WWW.TACTICALYELLOWVISOR.NET
- KevinB
- Silent But Deadly
- Posts: 1100
- Joined: Fri Feb 27, 2009 10:38 am
- Location: Northern VA
- Contact:
Re: MD Rail Hand Stop
We are doing a run of 400 of these handstops.
The MD rail Handstop is slightly different than the URXIII Handstop in that the screw is a different type -- the MD rail cut is thinner than the URXIII hole.
The MD rail Handstop is slightly different than the URXIII Handstop in that the screw is a different type -- the MD rail cut is thinner than the URXIII hole.
Kevin S. Boland
Director of Military Operations
Knight's Armament Company
701 Columbia Blvd.
Titusville, Fl 32780
Ph 321-607-9956
Cell 407-451-4544
Fax 321-383-2143
http://www.knightarmco.com
Director of Military Operations
Knight's Armament Company
701 Columbia Blvd.
Titusville, Fl 32780
Ph 321-607-9956
Cell 407-451-4544
Fax 321-383-2143
http://www.knightarmco.com