Range report for 762SD on a RRA AR-15

cyclone72 · Post by **cyclone72** » Thu Feb 08, 2007 4:03 pm

It had a first round pop which I didnt like too much but after that it seemed to tame it a little better than the M42000 more of a duller sound than the high pitched .223 sound out of an M42000.

rockpup · Post by **rockpup** » Thu Feb 08, 2007 5:37 pm

Interesting. I wonder if that first round pop is as prevelant with .30 cal rounds out of the same can.

cyclone72 · Post by **cyclone72** » Thu Feb 08, 2007 5:42 pm

rockpup wrote:Interesting. I wonder if that first round pop is as prevelant with .30 cal rounds out of the same can.

When I put it on my Savage 308 there is no FRP,hmm makes you wonder

chrisva · Post by **chrisva** » Fri Feb 09, 2007 5:30 am

There is more powder in a 308 = more gase !!

dmtsc · Post by **dmtsc** » Fri Feb 09, 2007 6:35 pm

I've shot a 762SD on a 6.8 SPC and 223 and I thought it sounded better than the cans made for those calibers, nothing scientific just my PERSONAL hearing.

ArevaloSOCOM · Post by **ArevaloSOCOM** » Fri Feb 09, 2007 9:35 pm

Thanks for the info Cyclone72.

I've been tempted to get a 762-SD and use it on both my AR & AK since the AK will be loud no matter what.

Artful · Post by **Artful** » Fri Feb 09, 2007 9:46 pm

Ok, had to see what happened with my AAC Cyclone,

swapped cans had someone else score and listen TAC-16 vs. Cyclone
Cyclone was rated quieter 3 out of 5 times on AR-15 so pretty close to each other as sounded alike with full power ammo.

cqbdoc10 · Post by **cqbdoc10** » Fri Feb 09, 2007 9:58 pm

Cyclone 72,

Where is the video that you promised all of us? We are patiently waiting. Tick-tock, tick-tock.....

cyclone72 · Post by **cyclone72** » Fri Feb 09, 2007 11:52 pm

cqbdoc10 wrote:Cyclone 72,

Where is the video that you promised all of us? We are patiently waiting. Tick-tock, tick-tock.....

I need to get a Camcorder/computer interface cord,I brought the dvr but it didnt have a tape in it

.So Feb 14 Ill need to buy the cord and a blank dvr tape and Thursday Ill go to the range,we'll see what happens.

ArevaloSOCOM · Post by **ArevaloSOCOM** » Sat Feb 10, 2007 2:36 am

cyclone72 wrote:
cqbdoc10 wrote:Cyclone 72,

Where is the video that you promised all of us? We are patiently waiting. Tick-tock, tick-tock.....
I need to get a Camcorder/computer interface cord,I brought the dvr but it didnt have a tape in it .So Feb 14 Ill need to buy the cord and a blank dvr tape and Thursday Ill go to the range,we'll see what happens.

EXCELLENT.

cyclone72 · Post by **cyclone72** » Wed Feb 14, 2007 8:40 pm

Alright fellas,Im set up for videos now with some blank tapes and Firewire so vids comin,not tommorry as the wife feels its not romantic so next week,Im gonna tape the Evo-9 and the Vidar and maybe the 762.Bring some friggin popcorn someone.

Guido2006 · Post by **Guido2006** » Wed Feb 28, 2007 2:03 pm

What mount did you use to attach the 762SD to the AR15?

I'm planning to get a 762SD for use on an M1A with the AAC mount, and it be great if I could use the same can on an AR15. Thanks.

Karl Knowlton · Post by **Karl Knowlton** » Wed Feb 28, 2007 3:20 pm

The M4-1000 mount will work with the 762sd on a 5.56mm rifle. (the bore on the M4-1000 FH is 5.56mm DO NOT use this mount on a .30 cal rifel)

rockpup · Post by **rockpup** » Wed Feb 28, 2007 4:24 pm

The older m4-2000 mounts are the same as the m4-1000 right?

Post by **silencertalk** » Wed Feb 28, 2007 4:36 pm

Yes, the same.

cyclone72 · Post by **cyclone72** » Wed Feb 28, 2007 4:54 pm

Guido2006 wrote:What mount did you use to attach the 762SD to the AR15?

I'm planning to get a 762SD for use on an M1A with the AAC mount, and it be great if I could use the same can on an AR15. Thanks.

I have an M4-2000 mount,

Guido2006 · Post by **Guido2006** » Wed Feb 28, 2007 6:40 pm

Karl/AAC wrote:The M4-1000 mount will work with the 762sd on a 5.56mm rifle. (the bore on the M4-1000 FH is 5.56mm DO NOT use this mount on a .30 cal rifel)

Don't worry Karl, no intention here of using the 5.56mm flash hider on the M1A. My plan is to use the M14/M1A mount you guys are producing.

Thanks for the information. I was hoping that the FH on the AR15 would be compatible with both the M4-1000 and the 762SD so that I could use an 762SD on the mount in the meantime and use an M4-1000 when/if I can afford another can.