Gracias Mike. I owe you an argyle sweater.

1_ar_newbie wrote:I think this is do-able

However, I need to work through the SHOT show backlog.

Let's try this at the end of the second quarter?

You da man! I thank you, my 223/5.56 rifles thank you AND my 762SD thanks you!

1_ar_newbie wrote:I think this is do-able

However, I need to work through the SHOT show backlog.

Let's try this at the end of the second quarter?

you DA man!

I need 2 of these also. Held off buying any in the first batch since I had some higher priority purchases, but now have funds and can't find any.

Just posting to keep this on the first page so no one forgets about us.

jreinke wrote:Just posting to keep this on the first page so no one forgets about us.

yes , I hope Mers comes back by and visits this page from time to time and keeps us updated...

We have 2 18t Muzzle Brakes instock:
http://www.skarms.com/index.php?route=p ... uct_id=104

Kane wrote:We have 2 18t Muzzle Brakes instock:
http://www.skarms.com/index.php?route=p ... uct_id=104

thanks .. bought them both!

crap .. I may need to cancel my order .. these look from the pic to be 5/8x24 ... m4-1000 is a 556 can , and 556 guns have 1/2x28 thread pitch!!

please advise!!!

imyomama wrote:

Kane wrote:We have 2 18t Muzzle Brakes instock:
http://www.skarms.com/index.php?route=p ... uct_id=104

thanks .. bought them both!

crap .. I may need to cancel my order .. these look from the pic to be 5/8x24 ... m4-1000 is a 556 can , and 556 guns have 1/2x28 thread pitch!!

please advise!!!

They are for the 5.56. Looks like our web designer has the wrong image selected. Sorry for any confusion

Well, I wish anyone else that has these in stock would chime in.

Thank you Kane, got them yesterday... Installed one on my 12.5" pws.. I hope this helps with the erosion i'm seeing from my m4-1000. less than 1k rounds through it and baffles have jagged edges...

Good deal, glad they worked out for you.

imyomama wrote:Thank you Kane, got them yesterday... Installed one on my 12.5" pws.. I hope this helps with the erosion i'm seeing from my m4-1000. less than 1k rounds through it and baffles have jagged edges...

Any other dealers out there have any? Chime in please !!!

-Tdog

1_ar_newbie wrote:I think this is do-able

However, I need to work through the SHOT show backlog.

Let's try this at the end of the second quarter?

T minus 2 months and counting!

I'm in for one!! Sure hope this happens, 100 would sell out easily I bet!!!

Keeping it on page 1.

Mike? Any update?

jreinke wrote:

1_ar_newbie wrote:I think this is do-able

However, I need to work through the SHOT show backlog.

Let's try this at the end of the second quarter?

T minus 2 months and counting!

T minus 2 DAYS and counting! Have the mounts been scheduled or do we have to wait for the end of the third quarter?

If all goes according to plan, these should be shipping to dealers late August / early September. Sorry for the delay, but they are going to happen!

Cade,

Can we order them direct from AAC?

Thanks.

cadepatterson wrote:If all goes according to plan, these should be shipping to dealers late August / early September. Sorry for the delay, but they are going to happen!

Who will "the dealers" be? I'm assuming Major Malfunction will be one.

This is great, I know what I will be spending my gun budget on for Sept.

Getting pretty close to September....so what's the status? I've got $300 burning a hole in my pocket for two mounts!

I need one too.

Hopefully these will be out soon, before I spend my money on other things.

Any updated info Cade?
Thanks!
-Tdog