.050" over bore size. I dont go under that,

These are a common item for integrals but I challenge you to find a better one than ours.
www.advancedbydesign.com

Introducing our Integral Ruger Mark IV pistol. All 17-4 user serviceable stainless steel core. Interlocking clipped radial baffles so they stay aligned every time and you dont lose zero. FRP is a thing of the past. https://www.advancedbydesign.com/products/advanced-by-design-llc-ruger-iv-integral-63...

Ive done several with .035 walls in 4130 threaded 28TPI . I dont know what you machinist is talking about. .060 is like sewer pipe thickness.

This forums been on ghost mode for a LONG time

You have armorers on set so actors dont go opening up and inspecting firearms themselves. That would be another recipe for disaster .Whole bunch of stupid going on that day but the events leading up to the shooting were not Baldwins fault from the standpoint where he "should have " inspect...

Yes I'm well aware that bronze screen exists. I need washers or better yet washers with a 1/4" hole in the middle. Its the concentric home thing thats the problem, Short of designing and building a punch set, which isnt impossible to be sure I dont know there is anything off the shelf I can do,...

I have a Hi Standard I want to do old school with screen washers. I have enough cans that work well. Anyone know where I can get screen washers? Bronze or SS. Punching out a hundred myself doesnt sound fun and getting the holes concentric sounds less fun.

300 grain subsonics. Red line.

So I was having a discussion with Kevin Brittingham on facebook, yeah I know. He contended that 8.6 BO subs have more energy at 1000 yards than supersonic 308 does. I'm like WTF did you just type? I shoot 338 subs at 1000 FPS ish out the muzzle frequently . At 200 yards the bullet drop in like 4 fee...

338 Spectre has been around a while among others on the AR15 platform. For a subsonic cartridge running in the 1000 FPS range it doesnt make much difference what the parent cartridge is. I run the Specrte which is based on the 10mm magnum cartridge and I'm very pleased with it. Point is there are se...

I love these old threads. A few years go by ad everything changes.

https://enfieldriflecompany.com/novus/landing-page/

All I'm seeing are washers. Looks like a terrible design.

I dont much bother with he pseudonyms. K baffles are still readily available from STC and theres still a crapload of 60 degree cone baffles available. The ATF's hard on seems to be reserved for those sellers hawking them with drilling fixtures at the same time and they dont seem to like drill marks ...

Cerberus is gone. A lot of sellers are going out of business. The ATF is going around scaring the hell out of sellers most of whom are just resellers or sell contract built parts from small machine shops and dont have the nerve to tell the ATF to stick it.

Figured it out. The Standard safety is different than the Mark 1 on and it has an integral bolt lock . Disable the sear block by grinding the part of the safety that engages the sear and the bolt lock still works.

The original Ruger .22 Standard pistols had a safety that also locked the slide. I know the Vietnam era ones built by MAC for the government with an integral silencer used a slide lock. I assume they just modified the gun to disable the safety part of it so that when the safety is pushed up it locks...

Up until about a year ago you could buy genuine Colt M16 receivers over the counter in Germany for 25 Euros a piece. There was no market for them. No parts availability nor was there a legal way for Germans to assemble one without a mountain of paperwork and neutering mods. The receivers were worthl...

OK. Its illegal and worthless in the US. In your local market who knows. Certainly no one here. Depends on your local laws and market.

Is that sear cut? If so I'd say 10 years or $10,000.

Not that we will ever hear from you again but its generally considered poor form to ask what you can sell an unlicensed machinegun for on your first post. Wait until your 7th or 8th post before you start throwing federal felonies around.

Put together a new 338 Spectre. Took it out today for a spin with 225 and 300 grain ammo. Easy sub MOA gun. Built a silencer for it with Cerberus wavelocks double clipped in a TI ASR tube. https://imagizer.imageshack.com/v2/691x332q90/r/923/pPysR6.jpg https://imagizer.imageshack.com/v2/691x254q90/r/...

Build up that post count

Picked up a Alpha/nano mount for the AAC Tirant from Ecco machine. Nice piece. I think most people would use them to be able to run a Slencerco Nano 3 lug since the AAC mounts are unobtanium and AAC is no longer with us. I picked it up to use with a Silencerco Alpha ASR mount. I bored out a ASR brak...

On the shld mfg sight im wondering if the radial or 60* trap would be better? You said 60 is the way to go and then linked the radial soooo? Marginal difference if any on pistols. Maybe favoring radials . The SHLD set looks well machined so theres that and the baffles are short and lots of them in ...