Search found 56 matches
- Sat Jan 06, 2018 6:49 pm
- Forum: Silencer Talk
- Topic: 9mm Suppressor recommendation
- Replies: 11
- Views: 3331
Re: 9mm Suppressor recommendation
I own quite a few suppressors and my favorite 9mm dedicated can is the AAC Tirant 9 M. It has baffles which I prefer over louder monocores and I don't get any first round pop in the long configuration. I almost always shoot it wet with a little RemOil sprayed in both ends. The Tirant 45M on a 9mm h...
- Thu Jan 04, 2018 8:09 pm
- Forum: Handloading
- Topic: 9mm subsonic mold
- Replies: 4
- Views: 6677
Re: 9mm subsonic mold
Im sorry to be asking but is swaging and sizing (running the bullets through a sizer) the same thing? Yes, if that is what you meant. I've been reading that a .356" mold would be better but I was thinking that a .357" would be fine, and better in case for whatever reason, the .356" wa...
- Thu Jan 04, 2018 7:56 pm
- Forum: Handloading
- Topic: 9mm subsonic mold
- Replies: 4
- Views: 6677
9mm subsonic mold
Ive heard that using a .357 mold is the best bet because of selection of molds. If I plan on Powder Coating/ Hi-Tek coating them, would you recommend a certain featured bullet mold to aid the coating for suppressed subsonic shooting? Also, what weight do you think would be admirable for this goal? L...
- Tue Jan 02, 2018 11:00 am
- Forum: Rugged Suppressors
- Topic: Just ordered an Obsidian 9
- Replies: 13
- Views: 22976
Re: Just ordered an Obsidian 9
T-Rex wrote:Keep your eyes open for deals on any pistons and/or fixed spacers you may need, during the wait
Times seem to have really dropped; the wait really shouldn't be all that long.
- Tue Jan 02, 2018 10:55 am
- Forum: Rugged Suppressors
- Topic: Just ordered an Obsidian 9
- Replies: 13
- Views: 22976
Re: Just ordered an Obsidian 9
T-Rex wrote:Keep your eyes open for deals on any pistons and/or fixed spacers you may need, during the wait
Times seem to have really dropped; the wait really shouldn't be all that long.
- Tue Jan 02, 2018 10:53 am
- Forum: Silencer Reviews
- Topic: ( DB / Weight / $ ) Comparison Spreadsheet?
- Replies: 3
- Views: 4093
( DB / Weight / $ ) Comparison Spreadsheet?
Just wondering if there is a table of all different types of cans, caliber specific that is stacked up against each other by the dB results, weight and the cost , etc.? Just makes it easier for prospective Owners to make a weighted decision based upon what they value most in a can and can make a inf...
- Tue Jan 02, 2018 10:40 am
- Forum: Silencer Talk
- Topic: 9mm Suppressor recommendation
- Replies: 11
- Views: 3331
Re: 9mm Suppressor recommendation
Excellent!
- Mon Jan 01, 2018 8:49 pm
- Forum: Silencer Talk
- Topic: 9mm Suppressor recommendation
- Replies: 11
- Views: 3331
Re: 9mm Suppressor recommendation
Ohh, so just make sure to get a 45 can is what you're saying?
- Mon Jan 01, 2018 7:10 pm
- Forum: Silencer Talk
- Topic: 9mm Suppressor recommendation
- Replies: 11
- Views: 3331
Re: 9mm Suppressor recommendation
Any reason to choose the Octane 45 over the Obsidian 45?bani wrote:octane 45. easy choice. get the 9mm endcap if you want.
- Fri Dec 29, 2017 10:14 am
- Forum: Silencer Talk
- Topic: 9mm Suppressor recommendation
- Replies: 11
- Views: 3331
Re: 9mm Suppressor recommendation
I was about to say, one of my buddies said to look at the obsidian series. He suggests the 45 though. And then just change the endcap.
- Thu Dec 28, 2017 9:32 am
- Forum: Silencer Talk
- Topic: 9mm Suppressor recommendation
- Replies: 11
- Views: 3331
9mm Suppressor recommendation
Hello all! After shooting a friends Gemtech (GM-9?, its an old can that has cone baffles and not the new mono-baffle) on my pistol with subs, im looking at 9mm cans. (it was great! ran perfect and was super quiet) I would prefer a 9mm specific can, although if a 45-can, can get it close to the same ...
- Fri Jul 28, 2017 2:11 pm
- Forum: Rifle Discussion
- Topic: CZ rimfire question
- Replies: 2
- Views: 1873
CZ rimfire question
Hey guys, Looking for a accurate .22lr bolt gun and have decided on CZ as the make, 455 series. Should I purchase the 455 American, comes threaded from the factory or would there be any benefit (barrel wise) to purchase the thicker barrel "Varmint" edition and pay a good smith to thread it...
- Thu Nov 03, 2016 9:18 am
- Forum: Silencersmithing Forum
- Topic: 60 degree cone baffles.
- Replies: 6
- Views: 3739
Re: 60 degree cone baffles.
So this would work better?
https://www.amazon.com/gp/aw/d/B00OTX3I ... ref=plSrch
And yeah its mainly to cut weight more than anything I think.
https://www.amazon.com/gp/aw/d/B00OTX3I ... ref=plSrch
And yeah its mainly to cut weight more than anything I think.
- Wed Nov 02, 2016 3:44 pm
- Forum: Silencersmithing Forum
- Topic: 60 degree cone baffles.
- Replies: 6
- Views: 3739
60 degree cone baffles.
I have acess to a lathe but was wondering if anyoneknew where one could find a 1" 60 degree zero flute deburring tool? It would make it so much easier to get that inside angle just right. Form 1 budget information.
- Fri Oct 21, 2016 3:38 pm
- Forum: Silencersmithing Forum
- Topic: Monocore for .308/300 blk.
- Replies: 9
- Views: 8500
Re: Monocore for .308/300 blk.
Gotcha, thank you!
- Wed Oct 19, 2016 12:26 pm
- Forum: Silencersmithing Forum
- Topic: Monocore for .308/300 blk.
- Replies: 9
- Views: 8500
Re: Monocore for .308/300 blk.
Got one more question for yah. If I were to build a suppressor(form 1) and go with the monocore, what wall thickness would I need if the material was stainless steel? Most cans have the wall + the thickness of the baffle wall. As each baffle slides over the shoulder of the one in front of it, the wa...
- Tue Oct 18, 2016 4:15 pm
- Forum: Silencersmithing Forum
- Topic: Monocore for .308/300 blk.
- Replies: 9
- Views: 8500
Re: Monocore for .308/300 blk.
Thank you for sparing me haha I was just looking at 6 flute countersink/deburring bits.
- Mon Oct 17, 2016 7:21 pm
- Forum: Silencersmithing Forum
- Topic: Monocore for .308/300 blk.
- Replies: 9
- Views: 8500
Re: Monocore for .308/300 blk.
Gotcha. If I were to do the K-baffles. for the 60 degree muzzle end of the baffles, would this tool work? If I already had drilled the center bore to .360"? http://www.ebay.com/itm/32mm-Dia-60-Degree-Straight-Shank-Chamfer-Milling-Cutter-Countersink-Drill-Bit-/351634109882?hash=item51df06b5ba:g...
- Mon Oct 17, 2016 4:00 pm
- Forum: Silencersmithing Forum
- Topic: Monocore for .308/300 blk.
- Replies: 9
- Views: 8500
Monocore for .308/300 blk.
Hello all! Looking to design my own suppressor mainly to be used for subsonic shooting and I believe its much easier to machine the Monocore. I understand that cone baffles probably suppress better but I was wondering about the actual shapes within a monocore. Looking at google's monocore collection...
- Fri Feb 19, 2016 3:12 pm
- Forum: Silencer Talk
- Topic: Huntertown Kestrel 762 K Baffle upgrade
- Replies: 20
- Views: 6415
Re: Huntertown Kestrel 762 K Baffle upgrade
Joe Is the Mench.
One day I hope to rebuild the kestrel so as feel like it wasnt THAT much of a waste.
When I do, I have total confidence in Curtis Tactical's ability to accomplish that goal.
One day I hope to rebuild the kestrel so as feel like it wasnt THAT much of a waste.
When I do, I have total confidence in Curtis Tactical's ability to accomplish that goal.
- Fri Feb 19, 2016 3:04 pm
- Forum: Silencersmithing Forum
- Topic: Suppressor shroud
- Replies: 11
- Views: 4183
Re: Suppressor shroud
yeah, Im not.
I think you're right.
I think you're right.
- Wed Jan 20, 2016 8:33 pm
- Forum: Silencersmithing Forum
- Topic: Suppressor shroud
- Replies: 11
- Views: 4183
Re: Suppressor shroud
Also, I plan on taking the barrel off of the receiver before making any changes as to not construct an SBR unintentionally.
- Wed Jan 20, 2016 8:32 pm
- Forum: Silencersmithing Forum
- Topic: Suppressor shroud
- Replies: 11
- Views: 4183
Re: Suppressor shroud
To start, Thanks for all of the replies guys! Im looking at doing a 8" barrel or 10" so ill need it to bee either an 8.25 " or 6.25" shroud. Heres another thought. Permanently affixed meaning you need power tools to take the device off? I need to read more on the ATF site. maybe ...
- Mon Jan 18, 2016 8:29 pm
- Forum: Silencersmithing Forum
- Topic: Suppressor shroud
- Replies: 11
- Views: 4183
Suppressor shroud
Hello Gents. Im looking to permanently affix a shroud to my barrel as to avoid paying another tax stamp. Want it to be light, so Aluminum is the way to go. I have plenty of welding experience. That being said, how would one go about "Pinning" an Aluminum shroud to a steel barrel? I thought...
- Wed Feb 04, 2015 3:12 pm
- Forum: Silencer Talk
- Topic: 300 blackout (Omega vs. Saker vs. 7.62 Sandman-L)
- Replies: 3
- Views: 2189
Re: 300 blackout (Omega vs. Saker vs. 7.62 Sandman-L)
Yeah thats what im thinking.
the omega should be able to do a mag dump if needed though right?
just not automatic fire.
the omega should be able to do a mag dump if needed though right?
just not automatic fire.