the above, glad your still with us Russian.

#2 also gets a vote, the kind of guy you would just love to suffocate of an evening.

Here we go, I still haven't tried this yet, large pipe cutters here are £30-50 approx second hand and I have little free time. Always good to see another Kiwi on-board. Was looking at a NZ Gunworx (sp?) yesterday, being used on a 6.8mm nice effective silencer, pleasant to listen to until the guy on ...

I hadn't noticed Tyris had been banned!!! :shock: I know Robert threatened it a few times but did not realise he had followed it through, seems unfair because the guy had a different point of view from most. In fact Robert has been using the ban stick a few times recently and on that basis, pray God...

Cool pic! If it was the barrel pic you were referring to steve, then more can be seen at the link below, the 500yd range is used regularly by three local clubs and is rented to other clubs from outwith the area to defray costs. Being a member of two of the local clubs I can shoot here on occasion u...

on one of the ranges I regularly use due to noise complaints from newly built properties we quietened down the noise by shooting through blue polypropylene barrels lined with eggshell type foam. A short piece of wood 2"x"2 is bolted to the bottom of the drum to stop it rolling. They are li...

Unless you work for Redjacket you will need at least 5 grand to have a meter that will capture the impulse of a gun shot. Will thinks 140db is hearing safe so what difference does there meter make? Actually it has been posted on other sites that at least in the UK, noise levels must be at or below ...

I am perfectly fine with fake drowning terrorists if it means I don't have to watch another American jumping from a building to their death before it collapses. meant to post this back when - just my opinion, but not "fake drowning" more a case of controlled drowning. edited to add: do ta...

F--k the photo - I want the video.....

If I'm not armed I don't want to be interested but in reality £6k a month and low percentage chance of being shot at sounds not bad. I think you have something with ship to ship arms and personnel transfer Blaubart. I'd want bonus for shipping on a gas tanker though!!! Came across this guy in the UK...

:shock: WHAT!!! You mean OBL didn't even fling a rock!!! :shock: a number of things sound a bit off, nothing unusual here - move along.... no doubt he was shot like a dog - no doubt he deserved it. :evil: then again maybe he is strapped to a chair etc, etc... I want to see the video, especially at t...

No thumbs up smilies so will have to do...

Cool, I got a motorbike too. CDI module went out, have a new one on order. :roll: http://i.ytimg.com/vi/jj-OFmBOb0A/0.jpg Not mine, just a photo of what I got I wanna stage some photos wearing old clothing, all the fairing taken off (DO NOT get your shoelaces caught in the drive belt.), aviation go...

I did not feel any sympathy for the victims, until now- http://www.spiegel.de/fotostrecke/fotostrecke-65981-2.html Honestly that just reads as your fucked up, doesn't matter that the victims were innocent, doesn't matter that firearms were planted, doesn't matter about the bereaved, doesn't matter ...

I re-read the above twice to ensure that the blast baffle was steel not alloy.

Good decision IMO, several people in the UK have reported erosion issues with HMR used through Sirocco SM11 alloy blast baffles, which in design looks very similar to your present build.

This one by Morin, could be the one your are thinking of Blaubart?

viewtopic.php?f=10&t=41861

if you type either side of your link [img]your%20http%20photo%20link[/img] the picture will be seen in your post,

From the three I like 3 and 1, do you know if can 3 would have more available volume than can 1 after machining?

I would happily build with them, effectively you would end up with a Sirocco SM11 silencer which is popular in the UK. These work well with subsonics. Hard to gauge the thickness from the photos but due to cockups while machining (I rarely measure stuff) I have ended up with "very" thin al...

I think I'm catching up....opposing cones on either side of a divider......followed by the fins and making the gas switchback through all six chambers? The cones fit inside the enlarged bore tube right? near enough, :) No cone required on the outlet side of the divider, unless you felt you wanted o...

It may just be your avatar pecking at brain through my peripheral vision while I'm trying to read.... Mission accomplished!!!!! Ha, that avatar is seriously irritating. :P I don't have a scanner or means of putting up a drawing and zero abiltity with CAD, believe me when I say I have tried, Solidwo...

Just get the gas away from the bullet as soon as you can, then, slow it down. And NEVER form a TUBE! +1 I like the design above except for the central tubes on the last four baffles, either cut them back to a third of the length ending mid chamber or loose them entirely replacing with a cone or con...

:D Gurkha's.... Some of the Baddest meanest Mother F'er's you'd ever want to meet. I still have an old SAR or SOF (I can't remember which one) write up about them some 10 years back. Gurkha's.... generally great people, nice pleasant, mild mannered and fun, right up until they switch on! Then you b...

It's fun to brainstorm and over think things and then if there is something in it, it can then be stripped back to the essentials. It might be the case that such a finned style has been looked at before and laid aside, either because it was ineffective or maybe because the builder did not have the m...

I have not tried crimping myself yet but it seems to offer solutions easier than boring the tube, I'm way too lazy for that. Increased volume, less weight, reduced or nil gas flow around the outer edge of the blast baffle. If the blast baffle had a reasonable length flange then several plug welds co...

700PSS wrote:Hey, "an eye for an eye", or in this case "nose".

"if" they butt stroked the fucker breaking his nose it would be a non issue and the local populace would probably agree that it was justified and have more respect as a result "