Washer build
Washer build
If a guy was to just shoot subsonics in a 300 blackout would 7 flat washers with 1 inch spacers work and a 2 inch blast chamber? Or do you need to bend the washers into cones and make M baffles? I was just looking at a simple build for plinking around.
Re: Washer build
If you are in a location where you can legally build a suppressor and not have to pay a ridiculous tax to do so, than sure, why not? Washers have been used in improvised designs for years, and they kind of work. It is even easy enough to form them into partial cones with a steel ball, a socket, and a vise or a hydraulic press...even a hammer. ( So easy, even George Clooney could do it!) Since you can get parts that are much easier to turn into suppressor cones, why bother building a really poor design, unless the plan is to just do it on the cheap? If you have to pay for a Tax stamp, building a quality "Can" won't really be all that much more work or expense.
- T-Rex
- Silent But Deadly
- Posts: 1865
- Joined: Wed Oct 29, 2014 3:38 pm
- Location: CT - The AntiConstitution State
Re: Washer build
I'd get more baffles in there (you can space closer to 7/16-9/16") and drop that blast spacing to "quite small".
If you can make a die and press them into a slight cone shape, as well as clip, you'd have even better performance.
If you can make a die and press them into a slight cone shape, as well as clip, you'd have even better performance.
Completed Builds www.silencertalk.com/forum/viewtopic.php?t=79895
Burst Calculator www.engineersedge.com/calculators/pipe_bust_calc.htm
Silencer Porn www.instagram.com/explore/tags/silencerporn/
Burst Calculator www.engineersedge.com/calculators/pipe_bust_calc.htm
Silencer Porn www.instagram.com/explore/tags/silencerporn/