Spring Small Lathe Forming Tool

Yes, it can be legal to make a silencer. For everything Form-1, from silencer designs that are easily made, to filing forms with the BATF, to 3D modeling. Remember, you must have an approved BATF Form-1 to make a silencer. All NFA laws apply.

Moderators: mpallett, bakerjw

Post Reply
Historian
Silent But Deadly
Posts: 3503
Joined: Mon Mar 29, 2010 10:37 pm

Spring Small Lathe Forming Tool

Post by Historian »

When HPA passes experimenting making baffles will
spawn advancement.

For those with small lathes using forming tools to
make novel cuts can be enhanced with a springy
forming-tool holder.

Check out the referenced HomeMadeTools topic referenced below.
Might be handy to book mark.


<< http://www.homemadetools.net/forum/lath ... #post91410 >>

Making Forming Tools:
<< https://www.youtube.com/watch?v=XR49xRCi59k >>
homemadetools
New Member
Posts: 2
Joined: Mon May 08, 2017 9:43 am

Re: Spring Small Lathe Forming Tool

Post by homemadetools »

Hey I know that site! :mrgreen:

You guys might like our homemade Gunsmithing tools. Here's the link, we have almost 300 listed:

http://www.homemadetools.net/tag/gunsmithing
Historian
Silent But Deadly
Posts: 3503
Joined: Mon Mar 29, 2010 10:37 pm

Re: Spring Small Lathe Forming Tool

Post by Historian »

+2!!!

Great site.

Replete with innovative approaches and practical
solutions from creative folks.

Like the three volume "The Machinist's Bedside Reader"
but less expensive, more available, and continual technical information data.

Well done, Sir.
homemadetools
New Member
Posts: 2
Joined: Mon May 08, 2017 9:43 am

Re: Spring Small Lathe Forming Tool

Post by homemadetools »

Hey guys - we have a new ebook out: How to Make a Belt Sander. 100% free of course. Click the graphic below to check it out:

Image
Post Reply