For you form 1 guys without lathes and mills, it seems like ya'll are plagued by having very limited options with recoil boosters for pistol cans, so I'm gonna throw out an offer.
I can custom manufacture 17-4 stainless (or other materials, but that makes the most sense) recoil booster housings with rear caps and springs to fit inside your tube. I won't be your cheapest option, of course; I would need the tubes in hand to properly match threads, and we're talking 4-5 hours of machining time, so it'll be in the neighborhood of a couple hundred bucks plus shipping, but it's an option. I can make the pistons, too, but would suggest choosing an off-the-shelf option unless those won't work for your design.
I can make a booster housing for 1" pistons (SiCo and others) to fit a tube ID as small as 1.080", although most pistol tubes are 1.375" or 1.5" OD with at least 1.25" ID. I don't like to go thinner than .040" on the walls, but if someone really wanted it, I suppose I could.
This is the booster housing I make for my Phoenix suppressors, which spaces the blast baffle. I can't get the images to embed for some reason. Sorry.
https://imgur.com/1pRZIJX
https://imgur.com/5qrYpeK
https://imgur.com/ESfc9CQ
Custom recoil boosters, made to order
-
- Silent But Deadly
- Posts: 633
- Joined: Tue Nov 28, 2017 5:34 pm
Custom recoil boosters, made to order
FFL07/02SOT Gunsmith & Machinist
Re: Custom recoil boosters, made to order
Your images may only be up to 1600 pixels high.ECCO Machine wrote:... I can't get the images to embed for some reason. ...
Your images may only be up to 1600 pixels wide.
Your images may only be up to 1600 pixels high.
Your images may only be up to 1600 pixels wide.
Your images may only be up to 1600 pixels high.
Your images may only be up to 1600 pixels wide.
http://www.youtube.com/watch?v=BDtd2jNIwAU MUSAFAR!
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
-
- Silent But Deadly
- Posts: 633
- Joined: Tue Nov 28, 2017 5:34 pm
Re: Custom recoil boosters, made to order
Interesting. When I try, it tells me something about size cannot be verified.doubloon wrote:Your images may only be up to 1600 pixels high.ECCO Machine wrote:... I can't get the images to embed for some reason. ...
Your images may only be up to 1600 pixels wide.
Your images may only be up to 1600 pixels high.
Your images may only be up to 1600 pixels wide.
Your images may only be up to 1600 pixels high.
Your images may only be up to 1600 pixels wide.
I can understand internal hosting file size limits, but why on earth would this site not allow images of any file size to embed when they are hosted elsewhere? That's just dumb.
FFL07/02SOT Gunsmith & Machinist
Re: Custom recoil boosters, made to order
Probably a bandwidth management issue.
If there is no limit on the size of images that can be embedded then an image heavy thread could be horrendously slow for people with slower speed connections. It seems archaic in this day and age when most people have multi-megabit connections but the software on this site hasn't been updated in a long time and even then some 'protections' are left in place for a long time in the software.
If there is no limit on the size of images that can be embedded then an image heavy thread could be horrendously slow for people with slower speed connections. It seems archaic in this day and age when most people have multi-megabit connections but the software on this site hasn't been updated in a long time and even then some 'protections' are left in place for a long time in the software.
http://www.youtube.com/watch?v=BDtd2jNIwAU MUSAFAR!
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
-
- New Member
- Posts: 3
- Joined: Fri Jan 14, 2022 5:46 pm
Re: Custom recoil boosters, made to order
Hi. I’m interested in having a booster made. Are you still doing this?