I am purchasing a kit from White Trash Tac., and I am not sure which baffles would be better. I can get 50 or 60 degree baffles or stepped ones.
The rifles will be a 300 Mag. and a 6.5 Mannlicher. The tube will be 7 1/2 inches with 2 stainless baffles and the remainder in titanium. In your knowledgeable opinion it this a good set up?
Nick
which baffles will be better
- Capt. Link.
- Silent But Deadly
- Posts: 2829
- Joined: Wed Oct 17, 2007 9:05 pm
- Location: USA.
Re: which baffles will be better
I don't think you can fit enough baffles into a 7.5" tube for suppression of the 300wm. A nine or ten inch suppressor @ two inches wide would be more appropriate. I would use 17-4 K baffles that have been welded together or carbon steel,either being heat treated. Titanium would be a good choice if you paced your shots.These will also fair better with extensive welding.
Check out the completed builds section. I know of at least one 300 build that featured step type baffles.
-CL
Check out the completed builds section. I know of at least one 300 build that featured step type baffles.
-CL
The only reason after 243 years the government now wants to disarm you is they intend to do something you would shoot them for!
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
- T-Rex
- Silent But Deadly
- Posts: 1865
- Joined: Wed Oct 29, 2014 3:38 pm
- Location: CT - The AntiConstitution State
Re: which baffles will be better
As the good Cpt said, a longer tube would be much better. I would shoot for 8.5"min.
50's are better w/ HV centerfire ammo
Progressively space them, like .75 .7 .65 .6 .55, etc
2 HT 17-4 followed by Ti should be fine.
50's are better w/ HV centerfire ammo
Progressively space them, like .75 .7 .65 .6 .55, etc
2 HT 17-4 followed by Ti should be fine.
Completed Builds www.silencertalk.com/forum/viewtopic.php?t=79895
Burst Calculator www.engineersedge.com/calculators/pipe_bust_calc.htm
Silencer Porn www.instagram.com/explore/tags/silencerporn/
Burst Calculator www.engineersedge.com/calculators/pipe_bust_calc.htm
Silencer Porn www.instagram.com/explore/tags/silencerporn/