YHM no longer sells the .22 Mite (M22-6028). And the guy I talked to there was no help.
Anybody know what nomenclature this Outing seal is??
Pete
Need new o ring seal for YHM Mite??? Hep me hep me
- T-Rex
- Silent But Deadly
- Posts: 1865
- Joined: Wed Oct 29, 2014 3:38 pm
- Location: CT - The AntiConstitution State
Re: Need new o ring seal for YHM Mite??? Hep me hep me
I inquired about purchasing a set of screws for a forearm that's no longer made and they just sent them to me, for free. So, I have a hard time believing they won't help you w/ a product that has a lifetime warranty. Regardless of whether or not the silencer is out of production or the fact you only need an o-ring. Also, you never received a user/owner's manual, w/ the silencer?
Either way, an o-ring is an o-ring. Do you own a pair of calipers or know anyone that does? You need to just measure the OD and thickness. I bet it doesn't even need to be very accurate as it might just be a standard size.
Go here and find your o-ring. Buna or Silicone will be fine, especially for 22lr. Sure, Viton and others might be a tad stronger, but Buna and Silicone are cheap and 100% up to the task.
Either way, an o-ring is an o-ring. Do you own a pair of calipers or know anyone that does? You need to just measure the OD and thickness. I bet it doesn't even need to be very accurate as it might just be a standard size.
Go here and find your o-ring. Buna or Silicone will be fine, especially for 22lr. Sure, Viton and others might be a tad stronger, but Buna and Silicone are cheap and 100% up to the task.
Completed Builds www.silencertalk.com/forum/viewtopic.php?t=79895
Burst Calculator www.engineersedge.com/calculators/pipe_bust_calc.htm
Silencer Porn www.instagram.com/explore/tags/silencerporn/
Burst Calculator www.engineersedge.com/calculators/pipe_bust_calc.htm
Silencer Porn www.instagram.com/explore/tags/silencerporn/
Re: Need new o ring seal for YHM Mite??? Hep me hep me
"The O-Ring Store" That's just beautiful! Easier to find than even "Spatula World"!
Re: Need new o ring seal for YHM Mite??? Hep me hep me
Thank you sir for the information.
I am now in my mid 70's and my long and short memory spans are shrinking.
This truly sucks.
Ten years ago I would have miked the diameter of the groove and ordered the dam things.
Thanks again,
Ex-PFC Henderson (late of RSVN).
I am now in my mid 70's and my long and short memory spans are shrinking.
This truly sucks.
Ten years ago I would have miked the diameter of the groove and ordered the dam things.
Thanks again,
Ex-PFC Henderson (late of RSVN).