Desperately need a 13.5 x 1 LID for Trinity?

Company specific discussions and announcements.
Post Reply
User avatar
mbwatson
New Member
Posts: 1
Joined: Thu Jan 08, 2009 11:42 am
Location: Abilene, TX

Desperately need a 13.5 x 1 LID for Trinity?

Post by mbwatson »

I am in desperate need of either a 13.5 x 1 LID or piston core for a Gem-Tech Trinity suppressor. I have tried Gem-Tech with no success. I have also checked the usual sites such as GunsAmerica, GunBroker, etc. I would appreciate any assistance that could be provided.

Thanks for your time and attention.

Mark
User avatar
WasDustyJacket
Silent But Deadly
Posts: 1160
Joined: Tue Nov 18, 2008 5:37 pm
Location: Missouri

Re: Desperately need a 13.5 x 1 LID for Trinity?

Post by WasDustyJacket »

Isn't it the same piston as the multimount?
Shoot softly, and carry a big clip.
Kramer
Silent But Deadly
Posts: 1083
Joined: Sat Dec 20, 2008 3:13 pm
Location: nePA

Re: Desperately need a 13.5 x 1 LID for Trinity?

Post by Kramer »

No they are not the same piston as the MM. As a matter of fact they are totally different pistons.

A while back I wanted to pick up a 13.5 piston for my Trinity, but that won't happen.
briansp82593
Member
Posts: 16
Joined: Wed Dec 24, 2008 6:37 pm

Re: Desperately need a 13.5 x 1 LID for Trinity?

Post by briansp82593 »

Gem-Tech recommended I speak to Mark McWillis at TROS, because apparently he can make one, or his diplomat can uses the same style LID's


I have yet to order one.
Kramer
Silent But Deadly
Posts: 1083
Joined: Sat Dec 20, 2008 3:13 pm
Location: nePA

Re: Desperately need a 13.5 x 1 LID for Trinity?

Post by Kramer »

briansp82593 wrote:Gem-Tech recommended I speak to Mark McWillis at TROS, because apparently he can make one, or his diplomat can uses the same style LID's


I have yet to order one.

Let us know if you get one and how well it functions. I would like to get either a 13.5 piston or lid assembly for my Trinity.
User avatar
Dark Tranquility
Elite Member
Posts: 692
Joined: Thu May 19, 2005 11:15 pm
Location: Florida

Re: Desperately need a 13.5 x 1 LID for Trinity?

Post by Dark Tranquility »

I have a 1/2X28 LID assembly for a Trinity I bought back 10 years ago. if anyone wants to buy it PM me.

Dan
Post Reply