Glock select fire

Questions and answers, photos, videos, and discussion.

Moderators: mpallett, bakerjw

User avatar
palladium
Senior Silent Operator
Posts: 141
Joined: Mon Nov 13, 2006 4:35 pm

Re: Glock select fire

Post by palladium »

Hello everyone, here is a little update. I paint the 26 slide and the selector with gun-kote and is the result.
Image
Image
Image
Image
User avatar
palladium
Senior Silent Operator
Posts: 141
Joined: Mon Nov 13, 2006 4:35 pm

Re: Glock select fire

Post by palladium »

Hello everyone. This is a new selector that I've sourced from Lebanon. It ressemble the American FSSG to the point I'm wondering if it's not a copy. The fit and finish is perfect and the push button switch works well.

Sadly the materials are to be low-end pot metal. My german-type selector is 2 times smaller and still it's heavier than this one. Also this selector only install with the slide lock on the slide stop which mean I have to physically remove the selector everything I want to remove the slide for maintenance which is a pain.The assembly is made using press fit pins which also isn't the best for maintenance. The disconnector is slightly angled. I didn't have the time to test fire it but as soon as I get around to it I'll post pics and my impressions.

So here are some comparative pics between the germain model and the lebanon model.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
User avatar
palladium
Senior Silent Operator
Posts: 141
Joined: Mon Nov 13, 2006 4:35 pm

Re: Glock select fire

Post by palladium »

Some weeks ago I received my new select fire from Sweden. The material quality is very good but the finish is so so. Here are some pic.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
User avatar
palladium
Senior Silent Operator
Posts: 141
Joined: Mon Nov 13, 2006 4:35 pm

Re: Glock select fire

Post by palladium »

Here are some compare pic between different model

Image
Image
Image
Image
Image
Image
gregforce1
New Member
Posts: 1
Joined: Wed Apr 25, 2012 7:42 am

Re: Glock select fire

Post by gregforce1 »

mp
kevc2181
New Member
Posts: 1
Joined: Sat Jun 16, 2012 2:46 am

Re: Glock select fire

Post by kevc2181 »

I've been reading reading this topic and I was wondering if anyone here would be willing to send me plans for one of these that's proven to work. I'd gladly make a donation towards your research! Thanks!
Simple Man
Member
Posts: 24
Joined: Tue Jun 12, 2012 9:44 pm
Location: North Carolina, USA

Re: Glock select fire

Post by Simple Man »

I cant open the pics?
User avatar
palladium
Senior Silent Operator
Posts: 141
Joined: Mon Nov 13, 2006 4:35 pm

Re: Glock select fire

Post by palladium »

Simple Man wrote:I cant open the pics?
You probably need an update on your computer because the pic is on the forum. You dont need to open it.
Anastas
New Member
Posts: 2
Joined: Sat Feb 02, 2013 6:50 am

Re: Glock select fire

Post by Anastas »

Is there anyone that can "serve" me one selector?

I'm out of USA...

Pls pm...
User avatar
ChimeraPrecision
Silent But Deadly
Posts: 622
Joined: Wed Sep 21, 2011 11:40 am
Location: Behind a Glock22

Re: Glock select fire

Post by ChimeraPrecision »

do cad drawings exist for this?
Keep calm, and suppress on
Anastas
New Member
Posts: 2
Joined: Sat Feb 02, 2013 6:50 am

Re: Glock select fire

Post by Anastas »

I hope that solves your problem !!!

http://grabcad.com/library/glock-auto-sear

Just sign up...

:wink:
ben336
New Member
Posts: 1
Joined: Tue May 06, 2014 6:45 pm

Re: Glock select fire

Post by ben336 »

Are some where blueprints for german model?

The link is for USA model
User avatar
EXO
New Member
Posts: 1
Joined: Fri Jul 25, 2014 8:49 am

Re: Glock select fire

Post by EXO »

Where can find blueprints for the Swedish model whose image is placed user palladium.The other two blueprints, which can be found on the Internet have errors in dimensions.
kizilat
New Member
Posts: 1
Joined: Fri Jun 17, 2016 3:37 am

Re: Glock select fire

Post by kizilat »

nice topic, i bought lebanon model from aliexpress but not working? anybody help to get one for my glock 19
clark4283
Member
Posts: 44
Joined: Mon Jun 25, 2012 6:18 pm
Location: North Carolina

Re:

Post by clark4283 »

palladium wrote:Here is the new generation of my select fire with small change for a better functioning and more pretty. With a net improvement of the blueprint that I make.


Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image




Here is a simplified version that allows automatic firing only.
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image[/img]
I know this is a ancient thread but does anyone have dimensions for the sear with the selector switch on the back?
snipedu1st
New Member
Posts: 1
Joined: Fri Sep 21, 2018 1:22 am

Re: Glock select fire

Post by snipedu1st »

so what happened with the G18 project??
brodiebro
New Member
Posts: 2
Joined: Fri Sep 14, 2018 3:35 pm

Re: Glock select fire

Post by brodiebro »

i sent dude a pm who designed all these i dont think he's been on here in a while does anyone know how i can contact him i want to buy the 3d/blue prints from him or if anyone has them i have some already im just look for a couple specific ones
User avatar
doubloon
Silent But Deadly
Posts: 11897
Joined: Wed Dec 31, 2008 11:02 pm
Location: Houston-ish

Re: Glock select fire

Post by doubloon »

I believe a download link is out there somewhere plus I seem to recall someone saying plans are published on USPTO.
http://www.youtube.com/watch?v=BDtd2jNIwAU MUSAFAR!
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
brodiebro
New Member
Posts: 2
Joined: Fri Sep 14, 2018 3:35 pm

Re: Glock select fire

Post by brodiebro »

i already have a few 3d models theres just 2 he has specifically that arent out there
poikilotrm
Silent But Deadly
Posts: 3851
Joined: Tue Apr 27, 2010 12:52 pm

Re: Glock select fire

Post by poikilotrm »

47_MasoN_47 wrote:I haven't read the whole thread (it's pretty long) but in the US only class II manufacturers or Class III FFLs can own these right?
Yes. Attempting to make or possess these parts is a state and federal felony. Assembling them is also a felony.

I believe this thread is an ATF or actual LEA sting. The low post count cheerleaders / “excited posters” are agents provacateur.
The moments I was censored was the moment that I won. That's twice, now.Thanks jwbaker, et al, for my victories.
User avatar
fishman
Silent But Deadly
Posts: 1444
Joined: Sun Dec 20, 2015 7:15 pm

Re: Glock select fire

Post by fishman »

poikilotrm wrote:
47_MasoN_47 wrote:I haven't read the whole thread (it's pretty long) but in the US only class II manufacturers or Class III FFLs can own these right?
Yes. Attempting to make or possess these parts is a state and federal felony. Assembling them is also a felony.

I believe this thread is an ATF or actual LEA sting. The low post count cheerleaders / “excited posters” are agents provacateur.
Is there any documentation that the ATF wastes federal tax dollars... Err... I mean... conducts stings like this?
300 blackout form 1: http://www.silencertalk.com/forum/viewtopic.php?f=10&t=137293

5.56 form 1:
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=141800&p=955647#p955647
poikilotrm
Silent But Deadly
Posts: 3851
Joined: Tue Apr 27, 2010 12:52 pm

Re: Glock select fire

Post by poikilotrm »

fishman wrote: Is there any documentation that the ATF wastes federal tax dollars... Err... I mean... conducts stings like this?
A metric F--k ton. Remember the TJF pre-86 DIAS for sale for years in Shotgun News? ATF sting.

Lots of online sting stuff out there. It is easier than real police work, and a lot safer.
The moments I was censored was the moment that I won. That's twice, now.Thanks jwbaker, et al, for my victories.
5sceamt3am
New Member
Posts: 1
Joined: Sun Jul 11, 2021 11:15 am

Re: Glock select fire

Post by 5sceamt3am »

Hey any way I could get those file to print to switch my self
cash1900st
New Member
Posts: 1
Joined: Sat Jan 15, 2022 9:44 pm

Re: Glock select fire

Post by cash1900st »

i need a switch
Gz304
New Member
Posts: 1
Joined: Wed Jan 26, 2022 8:10 pm

Re: Glock select fire

Post by Gz304 »

Is there any that can be mate w a cnc
Post Reply