Page 9 of 9

Re: Glock select fire

Posted: Sat Jan 21, 2012 8:10 pm
by palladium
Hello everyone, here is a little update. I paint the 26 slide and the selector with gun-kote and is the result.
Image
Image
Image
Image

Re: Glock select fire

Posted: Sat Jan 21, 2012 9:54 pm
by palladium
Hello everyone. This is a new selector that I've sourced from Lebanon. It ressemble the American FSSG to the point I'm wondering if it's not a copy. The fit and finish is perfect and the push button switch works well.

Sadly the materials are to be low-end pot metal. My german-type selector is 2 times smaller and still it's heavier than this one. Also this selector only install with the slide lock on the slide stop which mean I have to physically remove the selector everything I want to remove the slide for maintenance which is a pain.The assembly is made using press fit pins which also isn't the best for maintenance. The disconnector is slightly angled. I didn't have the time to test fire it but as soon as I get around to it I'll post pics and my impressions.

So here are some comparative pics between the germain model and the lebanon model.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Re: Glock select fire

Posted: Sun Apr 01, 2012 8:49 pm
by palladium
Some weeks ago I received my new select fire from Sweden. The material quality is very good but the finish is so so. Here are some pic.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Re: Glock select fire

Posted: Sun Apr 01, 2012 8:53 pm
by palladium
Here are some compare pic between different model

Image
Image
Image
Image
Image
Image

Re: Glock select fire

Posted: Wed Apr 25, 2012 1:50 pm
by gregforce1
mp

Re: Glock select fire

Posted: Sat Jun 16, 2012 10:53 am
by kevc2181
I've been reading reading this topic and I was wondering if anyone here would be willing to send me plans for one of these that's proven to work. I'd gladly make a donation towards your research! Thanks!

Re: Glock select fire

Posted: Sat Jun 16, 2012 1:29 pm
by Simple Man
I cant open the pics?

Re: Glock select fire

Posted: Sat Jun 16, 2012 5:07 pm
by palladium
Simple Man wrote:I cant open the pics?
You probably need an update on your computer because the pic is on the forum. You dont need to open it.

Re: Glock select fire

Posted: Sun Feb 03, 2013 7:54 am
by Anastas
Is there anyone that can "serve" me one selector?

I'm out of USA...

Pls pm...

Re: Glock select fire

Posted: Thu Feb 07, 2013 9:48 pm
by ChimeraPrecision
do cad drawings exist for this?

Re: Glock select fire

Posted: Fri Feb 08, 2013 1:17 am
by Anastas
I hope that solves your problem !!!

http://grabcad.com/library/glock-auto-sear

Just sign up...

:wink:

Re: Glock select fire

Posted: Tue May 06, 2014 7:00 pm
by ben336
Are some where blueprints for german model?

The link is for USA model

Re: Glock select fire

Posted: Fri Jul 25, 2014 12:28 pm
by EXO
Where can find blueprints for the Swedish model whose image is placed user palladium.The other two blueprints, which can be found on the Internet have errors in dimensions.

Re: Glock select fire

Posted: Fri Jun 17, 2016 3:38 am
by kizilat
nice topic, i bought lebanon model from aliexpress but not working? anybody help to get one for my glock 19

Re:

Posted: Sun Mar 12, 2017 10:12 am
by clark4283
palladium wrote:Here is the new generation of my select fire with small change for a better functioning and more pretty. With a net improvement of the blueprint that I make.


Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image




Here is a simplified version that allows automatic firing only.
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image[/img]
I know this is a ancient thread but does anyone have dimensions for the sear with the selector switch on the back?

Re: Glock select fire

Posted: Fri Sep 21, 2018 1:25 am
by snipedu1st
so what happened with the G18 project??

Re: Glock select fire

Posted: Sat Dec 01, 2018 12:38 am
by brodiebro
i sent dude a pm who designed all these i dont think he's been on here in a while does anyone know how i can contact him i want to buy the 3d/blue prints from him or if anyone has them i have some already im just look for a couple specific ones

Re: Glock select fire

Posted: Sat Dec 01, 2018 8:34 am
by doubloon
I believe a download link is out there somewhere plus I seem to recall someone saying plans are published on USPTO.

Re: Glock select fire

Posted: Wed Dec 19, 2018 10:42 pm
by brodiebro
i already have a few 3d models theres just 2 he has specifically that arent out there

Re: Glock select fire

Posted: Wed Dec 19, 2018 11:12 pm
by poikilotrm
47_MasoN_47 wrote:I haven't read the whole thread (it's pretty long) but in the US only class II manufacturers or Class III FFLs can own these right?
Yes. Attempting to make or possess these parts is a state and federal felony. Assembling them is also a felony.

I believe this thread is an ATF or actual LEA sting. The low post count cheerleaders / “excited posters” are agents provacateur.

Re: Glock select fire

Posted: Wed Dec 19, 2018 11:49 pm
by fishman
poikilotrm wrote:
47_MasoN_47 wrote:I haven't read the whole thread (it's pretty long) but in the US only class II manufacturers or Class III FFLs can own these right?
Yes. Attempting to make or possess these parts is a state and federal felony. Assembling them is also a felony.

I believe this thread is an ATF or actual LEA sting. The low post count cheerleaders / “excited posters” are agents provacateur.
Is there any documentation that the ATF wastes federal tax dollars... Err... I mean... conducts stings like this?

Re: Glock select fire

Posted: Thu Dec 20, 2018 10:39 am
by poikilotrm
fishman wrote: Is there any documentation that the ATF wastes federal tax dollars... Err... I mean... conducts stings like this?
A metric F--k ton. Remember the TJF pre-86 DIAS for sale for years in Shotgun News? ATF sting.

Lots of online sting stuff out there. It is easier than real police work, and a lot safer.

Re: Glock select fire

Posted: Sun Jul 11, 2021 11:24 am
by 5sceamt3am
Hey any way I could get those file to print to switch my self

Re: Glock select fire

Posted: Sat Jan 15, 2022 10:34 pm
by cash1900st
i need a switch

Re: Glock select fire

Posted: Wed Jan 26, 2022 9:07 pm
by Gz304
Is there any that can be mate w a cnc