Just ordered an Obsidian 9

Moderator:Henry Graham

Post Reply
TexasEric
Member
Posts:10
Joined:Sat Dec 02, 2017 9:36 am
Just ordered an Obsidian 9

Post by TexasEric » Sat Dec 02, 2017 9:44 am

Super pumped about it. No worries comes the long wait

This is my first can, is there any advice you can give me?

Also are there any db stats available yet?

TexasEric
Member
Posts:10
Joined:Sat Dec 02, 2017 9:36 am

Re: Just ordered an Obsidian 9

Post by TexasEric » Fri Dec 08, 2017 12:57 am

TexasEric wrote:Super pumped about it. No worries comes the long wait

This is my first can, is there any advice you can give me?

Also are there any db stats available yet?
Any info at all?

User avatar
doubloon
Silent But Deadly
Posts:11897
Joined:Thu Jan 01, 2009 1:02 am
Location:Houston-ish

Re: Just ordered an Obsidian 9

Post by doubloon » Fri Dec 08, 2017 9:46 am

I believe most people were happy enough with the performance of the Obsidian 45 on 9mm that they didn't see the point in the Obsidian 9.

The Obsidian 45, by all reports, is a quality doodad with good reviews and excellent performance. I'm sure the 9 will perform well also but I don't know anybody who owns one.
http://www.youtube.com/watch?v=BDtd2jNIwAU MUSAFAR!
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895

User avatar
John A.
Silent But Deadly
Posts:1145
Joined:Sun Dec 09, 2007 4:55 pm

Re: Just ordered an Obsidian 9

Post by John A. » Fri Dec 08, 2017 11:02 am

I think it's a good can.

Sounds good.

Not real heavy.

I think you'll be happy with it.
I don't care what your chart says

User avatar
T-Rex
Silent But Deadly
Posts:1876
Joined:Wed Oct 29, 2014 4:38 pm
Location:CT - The AntiConstitution State

Re: Just ordered an Obsidian 9

Post by T-Rex » Fri Dec 08, 2017 6:31 pm

Keep your eyes open for deals on any pistons and/or fixed spacers you may need, during the wait
Times seem to have really dropped; the wait really shouldn't be all that long.
Completed Builds www.silencertalk.com/forum/viewtopic.php?t=79895
Burst Calculator www.engineersedge.com/calculators/pipe_bust_calc.htm
Silencer Porn www.instagram.com/explore/tags/silencerporn/

pistolpeta
Silent Operator
Posts:56
Joined:Fri Oct 03, 2014 9:23 pm

Re: Just ordered an Obsidian 9

Post by pistolpeta » Tue Jan 02, 2018 12:55 pm

T-Rex wrote:Keep your eyes open for deals on any pistons and/or fixed spacers you may need, during the wait
Times seem to have really dropped; the wait really shouldn't be all that long.
:mrgreen:

pistolpeta
Silent Operator
Posts:56
Joined:Fri Oct 03, 2014 9:23 pm

Re: Just ordered an Obsidian 9

Post by pistolpeta » Tue Jan 02, 2018 1:00 pm

T-Rex wrote:Keep your eyes open for deals on any pistons and/or fixed spacers you may need, during the wait
Times seem to have really dropped; the wait really shouldn't be all that long.
:mrgreen:

rybern
New Member
Posts:5
Joined:Thu Jan 29, 2015 9:12 pm
Location:Alabama

Re: Just ordered an Obsidian 9

Post by rybern » Sat Mar 31, 2018 9:39 am

I purchased an Obsidian 9 a few months ago too. ATF cashed my check on March 24. Also did a form 1 to SBR a QC10 AR9 so I definitely need a fixed spacer. Let me know if you see a deal anywhere. I'm a machinist so I could make one if I knew the spcs. ;)

roodyrocker
Silent Operator
Posts:56
Joined:Fri May 29, 2015 8:41 pm

Re: Just ordered an Obsidian 9

Post by roodyrocker » Sun Apr 08, 2018 10:28 pm

SilencerShop shows the Rugged fixed barrel spacer for the Obsidianin in stock. Not cheap but there is one available.

Rudy
Rudy
1791 Firearms, LLC

hardcase
Silent But Deadly
Posts:449
Joined:Sun May 26, 2013 10:01 pm

Re: Just ordered an Obsidian 9

Post by hardcase » Mon Apr 09, 2018 11:41 am

TexasEric wrote:Super pumped about it. No worries comes the long wait

This is my first can, is there any advice you can give me?

Also are there any db stats available yet?
Ratings based on db numbers shouldn't be given a lot of weight in comparing cans. There are just to many other factors that come into play. Barrel length, bullet weight/powder, quality and position of the db meter. Many more. Also most people don't spend the 2k+ needed for a quality meter.

mlevans66
Member
Posts:11
Joined:Tue Mar 06, 2018 2:16 pm

Re: Just ordered an Obsidian 9

Post by mlevans66 » Thu Apr 12, 2018 5:55 pm

I have one and its hearing safe with federal aluminum ammo at a indoor range. Put in some hush and its super quite. I am quite happy!! I didn't get the 45 because I don't want to get all those guns suppressor barrels and end up spending more accessories then I did the can. lol

TexasEric
Member
Posts:10
Joined:Sat Dec 02, 2017 9:36 am

Re: Just ordered an Obsidian 9

Post by TexasEric » Sun Jul 15, 2018 11:07 am

It came in to the dealer a week ago. Unfortunately, I am working 6 days a week for the next two weeks, and the dealer is not open Sunday. So I will have wait another 3 weeks before I can pick it up.

I do what I have to for my family. Afterwards if there is time, I do what I want to. Another 3 weeks will not kill me, I have waited this long.

mlevans66
Member
Posts:11
Joined:Tue Mar 06, 2018 2:16 pm

Re: Just ordered an Obsidian 9

Post by mlevans66 » Mon Dec 17, 2018 5:19 pm

I have own and its quit indoors with range ammo but its cooler with the hush ammo. I did have an issue with the tri-lug adaptor and rugged took care of me. It was my first can and I'm still waiting to take it home.

Leslienouro
New Member
Posts:1
Joined:Thu Sep 09, 2021 10:15 am
Location:Germany
Contact:

-

Post by Leslienouro » Thu Sep 16, 2021 12:45 pm

Been gathering information on my first project for a month now. Found this website a few weeks ago. Finally ordered my copy of the book from Amazon. Can't wait to get it.
Seo-runs сервис по продвижению сайтов. Огромный опыт работы по выводу сайтво в топ, собственные технологии, доступны кейсы https://seo-runs.ru

Post Reply