Noveske 300blk 10.2, VLTOR VlS 2, and SDN6 build

airrick2003 · Post by **airrick2003** » Wed Jul 17, 2013 8:00 pm

Before I got everything together I had some worries that the rail might contact the suppressor, so I'm posting this to help the next guy who may be considering this setup.

Noveske 10.2 inch 300blk barrel
VLTOR VIS 9 inch midlength mono upper receiver assembly
AAC SDN-6 mounted on Blackout flash hider

Ramius · Post by **Ramius** » Wed Jul 17, 2013 8:28 pm

Thanks, 9" rail will work huh?

How much space b/t the base & rail 1/8"?

airrick2003 · Post by **airrick2003** » Wed Jul 17, 2013 8:50 pm

Ramius wrote:Thanks, 9" rail will work huh?

How much space b/t the base & rail 1/8"?

Oh it definitely fits with no contact

Best I can tell is about 1/12 of an inch gap measuring with an Architectural scale.

audiojason · Post by **audiojason** » Wed Jul 17, 2013 9:51 pm

I also built one that I was not sure if the suppressor was going to clear. This is a AAC 7.62SD with a TROS 8" barrel and Mega Machine Monolithic upper. Only about a credit card gap between the two.

airrick2003 · Post by **airrick2003** » Wed Jul 17, 2013 9:54 pm

audiojason wrote:I also built one that I was not sure if the suppressor was going to clear. This is a AAC 7.62SD with a TROS 8" barrel and Mega Machine Monolithic upper. Only about a credit card gap between the two.

Looks awesome!
I would have been on pins and needles though

DULLYJAY · Post by **DULLYJAY** » Fri Jul 19, 2013 4:07 am

Both rifles look great!

Noveske 300blk 10.2, VLTOR VlS 2, and SDN6 build

Noveske 300blk 10.2, VLTOR VlS 2, and SDN6 build

Re: Noveske 300blk 10.2, VLTOR VlS 2, and SDN6 build

Re: Noveske 300blk 10.2, VLTOR VlS 2, and SDN6 build

Re: Noveske 300blk 10.2, VLTOR VlS 2, and SDN6 build

Re: Noveske 300blk 10.2, VLTOR VlS 2, and SDN6 build

Re: Noveske 300blk 10.2, VLTOR VlS 2, and SDN6 build