Need to purchase 2 Titanium cups; skirt dimension 1.355"x0.75", 50 degree cone, cone length: prefer stepped cone, but can utilize non-stepped cone. Must be Non-clipped design.
These are to be used in a form 1 can, remaining cups at 60 degrees with 0.50, 0.42, 0.33 clipped skirts.
The two TI 50 degree cups will not be clipped in this design.
Skirted cup similar to pictured diagram @ link: https://www.dropbox.com/s/76yih0xklril1 ... n.png?dl=0
WTB: Two 1.355" 50 degree 0.75" skirt TI Cups
Moderators: mpallett, bakerjw, renegade
-
- New Member
- Posts: 1
- Joined: Wed Dec 22, 2021 7:35 pm