m110 Barrel?

[pathfinderheli]

anyone know of an equivalent m110 barrel that I could use for an M110 clone? i have all the parts but the barrel. I have a special edition ECR on order as well. want to be able to run my m110 suppressor as well.

thoughts?

[T-Rex]

Kriegerbarrels.com

[pathfinderheli]

you think I could give them a call and try to spec out the barrel?

[T-Rex]

you think I could give them a call and try to spec out the barrel?

Just go to their site.
Find the M110 barrel and fill out the "options" portion.
They'll give you a quote and you're ready to go.

[Tom12.7]

You could possibly send in an ER and have it re-barreled with a M110 barrel. It is expensive, but has happened.

[pathfinderheli]

you think I could give them a call and try to spec out the barrel?

Just go to their site.
Find the M110 barrel and fill out the "options" portion.
They'll give you a quote and you're ready to go.

i did that and the options give you .850 at the gas journal. The m110 spec is .750 from the gas journal to the 3/4 -24 threads.

[T-Rex]

Are you looking to do a Mod0 or Mod2?
It's my understanding that the Mod0 doesn't have enough meat for the 3/4 thread, hence the Mod2 being .850" at the muzzle.

It can't hurt to call Krieger. They would be more than happy to satisfy a customer. There's always Ayon at Boltcarrier.

[pathfinderheli]

The M110's have the .750 diameter from the gas block to the threads. The Mk11 Mod 0's are .750 at the gas block journal but have a step down to about .730 which is why they can't be threaded to 3/4-24. The Mk11 Mod 1's made for the USMC feature the same barrel as the M110.

Here is a link to TOS where some of the KAC guys (Jack L) talk about M110 clones:

https://www.ar15.com/archive/topic.html ... 1&t=241374

Either way I'll give KAC and Krieger a call.